Kriterijum produkcije
(M21a+) Rad u vodećem međunarodnom časopisu kategorije M21a+ |
Opis
Erceg T., Vukić (Skerlić) N., Šovljanski O., Teofilović V., Porobić S., Baloš S., Kojić S., Terek P., Banjanin B., Rakić S.: Preparation and characterization of biodegradable cellulose acetate-based films with novel plasticizer obtained by polyethylene terephthalate glycolysis intended for active packaging, Cellulose ISSN: 0969-0239, Springer, DOI: 10.1007/s10570-023-05240-6 |
Kriterijum produkcije
(M13) Monografska studija/poglavlje u knjizi M11 ili rad u tematskom zborniku vodećeg međunarodnog značaja |
Opis
Banjanin B., Vladić G., Adamović (Majkić) S., Bošnjaković G.: Polymers for 3D Printing, chapter 19 - Global market structure, Elsevier Inc., William Andrew - Applied Science Publishers, pp. 353-367, ISBN 978-0-12-818311-3 |
Kriterijum produkcije
(M13) Monografska studija/poglavlje u knjizi M11 ili rad u tematskom zborniku vodećeg međunarodnog značaja |
Opis
Vladić G., Banjanin B., Kašiković N., Pavlović Ž.: Polymers for 3D Printing, chapter 6 - Vat photopolymerization, Elsevier Inc., William Andrew - Applied Science Publishers, pp. 65-74, ISBN 978-0-12-818311-3. |
Kriterijum produkcije
(M13) Monografska studija/poglavlje u knjizi M11 ili rad u tematskom zborniku vodećeg međunarodnog značaja |
Opis
Vladić G., Kašiković N., Petrović S., Bošnjaković G., Banjanin B.: Advances in Product Design Engineering, chapter Digital Transformation of the Product Design and Idea Generation Process, Springer Nature Switzerland AG, pp. 219-227, ISBN 978-3-030-98123-5 |
Kriterijum produkcije
(M22) Rad u međunarodnom časopisu kategorije M22 |
Opis
Adamović (Majkić) S., Rajs V., Adamović D., Mihailović A., Samardžić S., Banjanin B., Stojanović Bjelić Lj.: Potential chemical stressors emitted during the operation of machines in the digital printing process, International Journal of Environmental Analytical Chemistry, 2020, ISSN 0306-7319 |
Kriterijum produkcije
(M22) Rad u međunarodnom časopisu kategorije M22 |
Opis
Erceg T., Tanasić J., Banjanin B., Baloš S., Cvetinov M., Cakić S., Ristić I.: Surface, structural, and thermal properties of polydimethylsiloxane‑based polyurethanes and their blends with thermoplastic polyurethane elastomer, Polymer Bulletin, 2022, ISSN 0170-0839 |
Kriterijum produkcije
(M22) Rad u međunarodnom časopisu kategorije M22 |
Opis
Pál (Apro) M., Cigula T., Jurič (Rilovski) I., Banjanin B., Miketić N., Bošnjaković G., Golubović Gala: Qualitative assessment on fold cracking of coated substrates: a digital image-based approach, Nordic Pulp and Paper Research Journal ISSN: 0283-2631 |
Kriterijum produkcije
(M22) Rad u međunarodnom časopisu kategorije M22 |
Opis
Bošnjaković G., Kašiković N., Vladić G., Banjanin B., Petrović S., Novaković D.: Tactile and mechanical investigation of screen printed specimens with puff effect, Industria textila ISSN: 1222-5347, Vol. 73, No. 4, Str. 454-459, Research Development National Institute for Textile and Leather |
Kriterijum produkcije
(M23) Rad u međunarodnom časopisu kategorije M23 |
Opis
Banjanin B., Vladić G., Pál (Apro) M., Baloš S., Dramićanin M., Rackov M., Knežević I.: Consistency analysis of mechanical properties of elements produced by FDM additive manufacturing technology, Revista Materia, 2018, Vol. 23, No. 4, ISSN 1517-7076 |
Kriterijum produkcije
(M23) Rad u međunarodnom časopisu kategorije M23 |
Opis
Boeva R., Spiridonov I., Bozhkova T., Novaković D., Banjanin B.: Evaluation of changes in the optical properties of high yield fibrous materials under thermal treatment, Bulgarian Chemical Communications, 2017, Vol. 49, No. L, pp. 115-120, ISSN 0324-1130 |
Kriterijum produkcije
(M23) Rad u međunarodnom časopisu kategorije M23 |
Opis
Samardžić Cvijanović S., Mihailović A., Adamović (Majkić) S., Adamović D., Banjanin B., Rajs V., Lakatoš R.: Noise and lighting as physical stressors in a printing laboratory - A case study, Environmental Engineering and Management Journal ISSN: 1582-9596, Vol. 22, No. 3, Str. 595-606, "Gheorghe Asachi" Technical University of Iasi, Romania |
Kriterijum produkcije
(M23) Rad u međunarodnom časopisu kategorije M23 |
Opis
Vladić G., Bošnjaković G., Pál (Apro) M., Banjanin B., Petrović S., Kašiković N., Dimovski V.: Investigation of Factors Influencing Ergonomic Characteristics of Water Bottle Handles, Tehnički vjesnik - Technical Gazette ISSN: 1330-3651, Vol. 29, No. 5(2022), Str. 1545-1551 |
Kriterijum produkcije
(M33) Saopštenje sa međunarodnog skupa štampano u celini |
Opis
Banjanin B., Kerac J., Adamović (Majkić) S., Milošević R., Game design studies: through the educational prism, 12th International Symposium on Graphic Engineering and Design, Faculty of Technical Sciences, University of Novi Sad (12 ; Novi Sad ; 2024), Vol. 1, No. 1, Str. 781-787, ISBN 2620-1429, Izdavač: University of Novi Sad, Faculty of technical sciences |
Kriterijum produkcije
(M33) Saopštenje sa međunarodnog skupa štampano u celini |
Opis
Banjanin B., Milić N., Kerac J., Milošević R., Adamović (Majkić) S.: Applications of real-time rendering game engine in education through practices and initiatives, Politehnika, Str. 526-531, ISBN 978-86-7498-110-8, Izdavač: The Academy of Applied Technical Studies Belgrade |
Kriterijum produkcije
(M33) Saopštenje sa međunarodnog skupa štampano u celini |
Opis
Banjanin B., Milić N., Milošević R., Adamović (Majkić) S., Pál (Apro) M.: Video games as a learning tool - potential applications in the Graphic engineering and design studies, International Symposium on Graphic Engineering and Design GRID, (11; Novi Sad; 2022), Vol. 11, Str. 617-625, ISBN 978-86-6022-533-9, Izdavač: University of Novi Sad, Faculty of Technical Sciences, Department of Graphic Engineering and Design |
Kriterijum produkcije
(M33) Saopštenje sa međunarodnog skupa štampano u celini |
Opis
Ilić T., Banjanin B., Pinćjer I.: From sketch to animated 3D model: Theatrical costume design, 12th International Symposium on Graphic Engineering and Design, Faculty of Technical Sciences, University of Novi Sad, ISBN 978-86-6022-699-2, Izdavač: University of Novi Sad, Faculty of Technical sciences, Department of graphic engineering and design |
Kriterijum produkcije
(M33) Saopštenje sa međunarodnog skupa štampano u celini |
Opis
Ilić T., Banjanin B., Kerac J.: From Video To Character Animation For 3d Theater Production: A Pilot Study, Conference on Information and Graphic Arts Technology (10 ; Ljubljana ; 2025), Str. 575-580. |
Kriterijum produkcije
(M33) Saopštenje sa međunarodnog skupa štampano u celini |
Opis
Banjanin B., Pál (Apro) M., Dimovski V., Adamović (Majkić) S., Lilić A.: 3D printing in the education of graphic engineering and design students, 10. International Symposium on Graphic Engineering and Design GRID, Novi Sad: University of Novi Sad, Faculty of technical sciences, Department of graphic engineering and design, 12-14 November, 2020, pp. 457-468, ISBN 978-86-6022-302-1, UDK: 655(082), 7.05:655(082) |
Kriterijum produkcije
(M33) Saopštenje sa međunarodnog skupa štampano u celini |
Opis
Kerac J., Golubović G., Milić N., Banjanin B.: Neurophysiological game experience evaluation through character identification: A review, International Conference on Printing, Design and Graphic Communications - Blaž Baromić, Vol. 1, Str. 193-201, ISBN 2991-2733, Izdavač: University of Zagreb Faculty of Graphic Arts Zagreb,
Croatia |
Kriterijum produkcije
(M33) Saopštenje sa međunarodnog skupa štampano u celini |
Opis
Banjanin B., Nedeljković U.: Comparing different letter spacing methods in sans-serif typeface design, 7. International Symposium on Graphic Engineering and Design GRID, Novi Sad: Department of graphic engineering and desing, 13-14 November, 2014, pp. 441-448, ISBN 978-86-7892-647-1 |
Kriterijum produkcije
(M33) Saopštenje sa međunarodnog skupa štampano u celini |
Opis
Pál (Apro) M., Banjanin B., Dedijer S., Vladić G., Bošnjaković G.: Preliminary analysis of image processing-based evaluation of embossing quality, 10. International Symposium on Graphic Engineering and Design GRID, Novi Sad: Faculty of Technical Sciences, Department of Graphic Engineering and Design, 12-14 November, 2020, pp. 269-278, ISBN 978-86-6022-303-8 |
Kriterijum produkcije
(M33) Saopštenje sa međunarodnog skupa štampano u celini |
Opis
Banjanin B., Vladić G., Pál (Apro) M., Dimovski V., Adamović (Majkić) S., Bošnjaković G.: Production factors influencing mechanical and physical properties of FDM printed embossing dies, 9. International Symposium on Graphic Engineering and Design GRID, Novi Sad: University of Novi Sad, Faculty of technical sciences, Department of graphic engineering and design, 8-10 November, 2018, pp. 225-236, ISBN 978-86-6022-115-7 |
Kriterijum produkcije
(M33) Saopštenje sa međunarodnog skupa štampano u celini |
Opis
Banjanin B., Vladić G., Bošnjaković G., Adamović (Majkić) S., Kašiković N.: Influence of post-treatment methods on mechanical properties of PLA parts fabricated by fused deposition modeling, 5. International Scientific Conference on Advances in Mechanical Engineering – ISCAME, Debrecen: Department of Mechanical Engineering, Faculty of Engineering, University of Debrecen, 12-14 October, 2017, pp. 41-47, ISBN 978-963-473-304-1 |
Kriterijum produkcije
(M33) Saopštenje sa međunarodnog skupa štampano u celini |
Opis
Banjanin B., Vreća N., Vasić J.: Readability of text set up with uniwidth typeface of different font weights , 8. International Symposium on Graphic Engineering and Design, GRID, Novi Sad: University of Novi Sad, Faculty of technical sciences, Department of graphic engineering and design, 3-4 November, 2016, pp. 369-373, ISBN 978-86-78928-67-3 |
Kriterijum produkcije
(M33) Saopštenje sa međunarodnog skupa štampano u celini |
Opis
Banjanin B., Zorić V.: Influence of display contrast on text readability on different handheld devices, 8. Sigt - 7th Symposium of Information and Graphic Arts Technology, Ljubljana, 5-6 June, 2014, pp. 115-119, ISBN 978-961-6900-09-6 |
Kriterijum produkcije
(M33) Saopštenje sa međunarodnog skupa štampano u celini |
Opis
Banjanin B., Nedeljković U.: Differences in screen printed letter shapes and stem widths on various textile materials , 11. Seminar in Graphic Arts, Pardubice, 17-18 June, 2013, pp. 86-93, ISBN 978-80-7395-660-8 |
Kriterijum produkcije
(M33) Saopštenje sa međunarodnog skupa štampano u celini |
Opis
Nedeljković U., Banjanin B., Pinćjer I.: Designing GridSans Regular with Titling Alternates, 5. International Symposium on Graphic Engineering and Design, GRID, Novi Sad: Fakultet tehničkih Nauka, 11-12 November, 2010, pp. 155-162, ISBN 978-86-7892-294-7 |
Kriterijum produkcije
(M33) Saopštenje sa međunarodnog skupa štampano u celini |
Opis
Ilić K., Banjanin B., Spasojević S., Adamović (Majkić) S., Dramićanin M.: Effect of Infill Pattern on the Tensile Strength of FDM 3D Printed PLA Material, International Scientific Conference "Flexible Technologies" - MMA (15 ; Novi Sad ; 2024), Str. 235-238, Izdavač: FTN |
Kriterijum produkcije
(M33) Saopštenje sa međunarodnog skupa štampano u celini |
Opis
Adamović (Majkić) S., Milošević R., Banjanin B., Dramićanin M., Ilić Mićunović M., Mihailović A., The particulate matter in the working environment of the digital printing machine detected by stationary and personal methods, 12th International Symposium on Graphic Engineering and Design, Faculty of Technical Sciences,
University of Novi Sad (12 ; Novi Sad ; 2024), Str. 665-669, ISBN 978-86-6022-698-5, Izdavač: University of Novi Sad, Faculty of Technical Sciences, Graphic Engineering and Design |
Kriterijum produkcije
(M33) Saopštenje sa međunarodnog skupa štampano u celini |
Opis
Adamović (Majkić) S., Pinćjer I., Banjanin B., Đurđević S., Miketić N.: The evaluation of the organic load of the waste offset developer with extraction methods, 10. International Symposium on Graphic Engineering and Design GRID, Novi Sad: University of Novi Sad, Faculty of Technical Sciences, Department of Graphic Engineering and Design, 12-14 November, 2020, pp. 199-203, ISBN 978-86-6022-302-1 |
Kriterijum produkcije
(M33) Saopštenje sa međunarodnog skupa štampano u celini |
Opis
Vladić G., Bošnjaković G., Kašiković N., Đurđević S., Banjanin B.: Eye tracking study of packaging form judgement, 1. International Conference on Circular Packaging CPC, Ljubljana: Pulp and Paper Institute, 26-27 September, 2019, pp. 85-94, ISBN 978-961-90424-5-8 |
Kriterijum produkcije
(M33) Saopštenje sa međunarodnog skupa štampano u celini |
Opis
Pál (Apro) M., Dedijer S., Kašiković N., Vladić G., Novaković D., Pavlović Ž., Banjanin B.: Investigation of adhesive layer thickness distribution of perfect bounded broshures, 11. Innovations in Publishing, Printing and Multimedia Technologies, Kaunas: Kaunas University of Applied Sciences, 19-20 April, 2018, pp. 90-96 |
Kriterijum produkcije
(M33) Saopštenje sa međunarodnog skupa štampano u celini |
Opis
Pál (Apro) M., Dedijer S., Pavlović Ž., Banjanin B., Vasić J.: Statistical analysis of adhesive layer thickness` distribution on perfect bounded brochures, 9. International Symposium on Graphic Engineering and Design GRID, Novi Sad: Faculty of Technical Sciences, 8-10 November, 2018, pp. 197-203, ISBN 978-86-6022-115-7 |
Kriterijum produkcije
(M33) Saopštenje sa međunarodnog skupa štampano u celini |
Opis
Bošnjaković G., Vladić G., Banjanin B., Vasić J.: The influence of the type of a beverage on its packaging shape, 9. International Symposium on Graphic Engineering and Design GRID, Novi Sad: Univerzitet u Novom Sadu, Fakultet tehničkih nauka, 8-10 November, 2018, pp. 243-251, ISBN 978-86-6022-115-7 |
Kriterijum produkcije
(M33) Saopštenje sa međunarodnog skupa štampano u celini |
Opis
Vasić J., Jovičić D., Banjanin B.: The development of the knowledge base of contemporary graphic laboratory, 8. International Symposium on Graphic Engineering and Design GRID, Novi Sad: Fakultet tehničkih nauka, 3-4 November, 2016, pp. 439-448, ISBN 978-86-78928-67-3 |
Kriterijum produkcije
(M33) Saopštenje sa međunarodnog skupa štampano u celini |
Opis
Sadžakov M., Banjanin B., Ružičić B., Adamović B.: The surface coverage analysis of metal substrate printed with UV inkjet ink, 7. International Symposium on Graphic Engineering and Design GRID, Novi Sad, 13-14 November, 2014, pp. 273-278, ISBN 978-86-7892-647-1 |
Kriterijum produkcije
(M33) Saopštenje sa međunarodnog skupa štampano u celini |
Opis
Prica M., Dalmacija B., Pešić V., Milošević R., Banjanin B., Zorić V., Adamović (Majkić) S.: Possibility of using cardboard mill sludge in immobilization of copper from contaminated sediment, 6. International Symposium on Graphic Engineering and Design, GRID, Novi Sad: Faculty of Technical Sciences, Department of Graphic Engineering and Desing, Novi Sad, 15-16 November, 2012, pp. 317-320, ISBN 978-86-7892-457-6 |
Kriterijum produkcije
(M33) Saopštenje sa međunarodnog skupa štampano u celini |
Opis
Nedeljković U., Banjanin B., Puškarević I., Pinćjer I.: Empirical findings on feature distinctiveness: legibility based on differentiation of characters, 6. International Symposium on Graphic Engineering and Design, GRID, Novi Sad, 15-16 November, 2012, pp. 261-270, ISBN 9788678924576 |
Kriterijum produkcije
(M33) Saopštenje sa međunarodnog skupa štampano u celini |
Opis
Adamović (Majkić) S., Milošević R., Banjanin B.,Tomić I., Gvoka Teodora: Chemical resistance analysis of inkjet printed ceramic tiles, International Printing Technologies Symposium, Str. 105-109, ISBN 978-605-70806-3-9, Izdavač: Printing Industry Education Foundation, Istanbul, Turkey |
Kriterijum produkcije
(M33) Saopštenje sa međunarodnog skupa štampano u celini |
Opis
Milošević R., Adamović (Majkić) S., Komlenić A., Banjanin B., Menzildžić D., Dimovski V.: Evaluating the imperative of social media presence for B2B print industry businesses, International Printing Technologies Symposium, Str. 281-285, ISBN 978-605-70806-3-9, Izdavač: Printing Industry Education Foundation (BASEV) Bukitap Basim Sanayi Egitim Vakfi (BASEV) tarafindan yayinlanmiştir |
Kriterijum produkcije
(M33) Saopštenje sa međunarodnog skupa štampano u celini |
Opis
Pál (Apro) M., Banjanin B., Dedijer S., Jurič (Rilovski) I., Pavlović Ž., Bošnjaković G., Gvoka T.: Image Processing-based evaluation of blind embossing quality on pulp-colored substrates, Vol. 4, Str. 235-244, ISBN 978-605-70806-3-9, Izdavač: Printing Industry Education Foundation (BASEV) |
Kriterijum produkcije
(M33) Saopštenje sa međunarodnog skupa štampano u celini |
Opis
Milošević R., Komlenić A., Kašiković N., Banjanin B., Menzildžić D.: Instagram Influencers’ Responsiveness to a Small Business Collaboration Outreach, International symposium on graphic engineering and design (11 ; Novi Sad ; 2022), Str. 237-243, ISBN 978-86-6022-533-9, Izdavač: University of Novi Sad, Faculty of Technical Sciences, Department of Graphic Engineering and Design |
Kriterijum produkcije
(M33) Saopštenje sa međunarodnog skupa štampano u celini |
Opis
Fijat I., Milić N., Banjanin B.: Defining cost-effective workflow for a photorealistic 3D character based on a real person using a metahuman framework, International symposium on graphic engineering and design (11 ; Novi Sad ; 2022), Vol. 11, Str. 293-299, ISBN 978-86-6022-533-9, Izdavač: University of Novi Sad, Faculty of Technical Sciences, Department of Graphic Engineering and Design |
Kriterijum produkcije
(M33) Saopštenje sa međunarodnog skupa štampano u celini |
Opis
Dedijer S., Kašiković N., Pál (Apro) M., Pavlović Ž., Vladić G., Tomić I., Banjanin B.: An overview of various possibilities of 3D printing techniques in the production of flexographic printing plates, Conference of Chemists, Technologists and Environmentalists of Republic of Srpska (14 ; Banja Luka; 2022), Str. 176-183, ISBN 978-99938-54-98-2, Izdavač: University in Banja Luka, Faculty of Technology |
Kriterijum produkcije
(M34) Saopštenje sa međunarodnog skupa štampano u izvodu |
Opis
Bošnjaković G., Vladić G., Pál (Apro) M., Banjanin B., Petrović S.: Ergonomics of handles for packaging products , 1. IJCELIT 2017 - International Joint Conference on Enviromental and Light Industry Technologies, Budimpešta: Óbuda University - Sándor Rejtő Faculty of Light Industry and Environmental Engineering, 23-24 November, 2017, pp. 22-22, ISBN 978-963-449-061-6 |
Kriterijum produkcije
(M34) Saopštenje sa međunarodnog skupa štampano u izvodu |
Opis
Adamović (Majkić) S., Tomić I., Banjanin B., Milošević R., Adamović D., Mihailović A., Dramićanin M.: The heavy metals in the processing screen printing inks, pp. 64-65, ISBN 978-963-306-963-9, University of Szeged, H-6720 Szeged, Dugonics tér 13, Hungary |
Kriterijum produkcije
(M52) Rad u nacionalnom časopisu kategorije M52 |
Opis
Banjanin B., Novaković D., Nedeljković U.: Changes in letter stem widths after being screen printed on bleached cotton fabric, Tekstilna industrija, 2014, Vol. 60, No. 4, pp. 24-29, ISSN 0040-2389, UDK: 677+687 |
Kriterijum produkcije
(M52) Rad u nacionalnom časopisu kategorije M52 |
Opis
Bošnjaković G., Tatović I., Petrović S., Banjanin B., Vasić J.: Resistance of screen-printed PVC foils to external influence, Machine Design, 2018, Vol. 10, No. 3, pp. 129-134, ISSN 1821-1259 |
Kriterijum produkcije
(M53) Rad u nacionalnom časopisu kategorije M53 |
Opis
Ilić T., Banjanin B., Kerac J.: Redizajn i konstrukcija digitalnog pozorišnog kostima, Zbornik radova Fakulteta tehničkih nauka ISSN: 0350-428X, Vol. 40, No. 2, Str. 42-45, Izdavač: Fakultet tehničkih nauka |
Kriterijum produkcije
(M53) Rad u nacionalnom časopisu kategorije M53 |
Opis
Bošnjaković G., Vladić G., Pál (Apro) M., Banjanin B., Dedijer S.: Performance evaluation of paper embossing tools produced by fused deposition modelling additive manufacturing technology, Journal of Graphic Engineering and Design, 2017, Vol. 8, No. 2, pp. 47-54, ISSN 2217-379X |
Kriterijum produkcije
(M53) Rad u nacionalnom časopisu kategorije M53 |
Opis
Milošević R., Nedeljković U., Banjanin B., Novaković D., Kašiković N.: The analysis of ink jet printed eco-font efficiency, Journal of Graphic Engineering and Design, 2016, Vol. 7, No. 1, pp. 13-18, ISSN 2217-379X |
Kriterijum produkcije
(M53) Rad u nacionalnom časopisu kategorije M53 |
Opis
Petrović M., Banjanin B.: Digitization of typeface Amarna with analysis and application of methods for determining spacing between letters, Zbornik radova Fakulteta tehničkih nauka, 2015, Vol. 30, No. 8, pp. 1375-1378, ISSN 0350-428X, UDK: 655 |
Kriterijum produkcije
(M53) Rad u nacionalnom časopisu kategorije M53 |
Opis
Banjanin B., Nedeljković U.: Sidebearings analysis of alphabet letters with complex shape, Journal of Graphic Engineering and Design, 2014, Vol. 5, No. 2, pp. 17-22, ISSN 2217-379X, UDK: 655.26 |
Kriterijum produkcije
(M53) Rad u nacionalnom časopisu kategorije M53 |
Opis
Aparac S., Nedeljković U., Banjanin B.: Designing and generating typeface Judy and use of contextual alternates in Opentype font format, Zbornik radova Fakulteta tehničkih nauka, 2014, No. 7, pp. 1315-1318, ISSN 0350-428X |
Kriterijum produkcije
(M53) Rad u nacionalnom časopisu kategorije M53 |
Opis
Davidović Ž., Nedeljković U., Banjanin B.: Grouping font characters into the kerning classes, Zbornik radova Fakulteta tehničkih nauka, 2012, No. 18, pp. 3926-3929, ISSN 0350-428X |
Kriterijum produkcije
(M53) Rad u nacionalnom časopisu kategorije M53 |
Opis
Banjanin B., Nedeljković U.: Font hinting techniques and the importance of applying these techniques for high-quality display of fonts on the output device screen , Journal of Graphic Engineering and Design, 2012, Vol. 3, No. 1, pp. 23-30, ISSN 2217-379X, UDK: 777.27:777.3 |
Kriterijum produkcije
(M53) Rad u nacionalnom časopisu kategorije M53 |
Opis
Banjanin B., Nedeljković U.: GRID Sans font u open type font fajl formatu i njegove karakteristike, Zbornik radova Fakulteta tehničkih nauka, 2010, Vol. 25, No. 20, pp. 4237-4240, ISSN 0350-428X |
Kriterijum produkcije
(M53) Rad u nacionalnom časopisu kategorije M53 |
Opis
Nedeljković U., Puškarević I., Banjanin B., Pinćjer I.: Legibility based on differentiation of characters: A review of empirical findings fundamental for the type design practice, Journal of Graphic Engineering and Design, 2013, Vol. 4, No. 1, pp. 17-27, ISSN 2217-379X, UDK: 655.261 655.262 |
Kriterijum produkcije
(M63) Saopštenje sa skupa nacionalnog značaja štampano u celini |
Opis
Adamović (Majkić) S., Adamović D., Mihailović A., Pinćjer I., Banjanin B., Đurđević S.: Analiza koncentracionih nivoa PM10 suspendovanih čestica u štampariji, 12. International Scientific Conference ETIKUM, Novi Sad: University of Novi Sad, Faculty of Technical Sciences, Department of Production Engineering, 6-8 Decembar, 2018, pp. 165-168, ISBN 978-86-6022-123-2 |
Kriterijum produkcije
(M63) Saopštenje sa skupa nacionalnog značaja štampano u celini |
Opis
Banjanin B., Vladić G., Pál (Apro) M., Bošnjaković G., Adamović (Majkić) S.: Definisanje elemenata alata za utiskivanje izrađenih FDM tehnikom 3D štampe, 12. International Scientific Conference ETIKUM, Novi Sad: University of Novi Sad, Faculty of technical sciences, Department of production engineering, Chair of metrology, Quality fixtures, tools and ecological engineering aspects, 6-8 Decembar, 2018, pp. 5-8, ISBN 978-86-6022-123-2, UDK: 621:658.562(082); 502.175(082) |
Kriterijum produkcije
(M63) Saopštenje sa skupa nacionalnog značaja štampano u celini |
Opis
Vladić G., Banjanin B., Kašiković N., Bošnjaković G., Pál (Apro) M.: Pregled mogućnosti primene tehnologija aditivne proizvodnje za izradu alata u grafičkoj industriji, 12. Conference of Chemists, Technologists and Environmentalists of Republic of Srpska, Banja Vrućica: University in Banjaluka, Faculty of Technology, 2-3 Novembar, 2018, pp. 602-609 |
Kriterijum produkcije
(M63) Saopštenje sa skupa nacionalnog značaja štampano u celini |
Opis
Banjanin B., Nedeljković U.: The issues in displaying font on the e-book reader, PC tablet, and mobile phone, 16. "Blaž Baromić" International Conference on printing, design and graphic communications, Senj: Hrvatsko društvo grafičara, Hrvatska, 26-29 Septembar, 2012, pp. 123-134, ISBN 978-953-56838-2-7 |
Kriterijum produkcije
(M63) Saopštenje sa skupa nacionalnog značaja štampano u celini |
Opis
Vladić G., Kašiković N., Bošnjaković G., Banjanin B., Zeljković Ž.: Primena kompjuterom generisane grafike u dizajnu tekstilnih proizvoda, 3. Međunarodna naučna konferencija Savremeni trendovi i inovacije u tekstilnoj industriji, Beograd: Union of engineers and textile technicians of Serbia, 17-18 Septembar, 2020, pp. 102-109 |
Kriterijum produkcije
(M63) Saopštenje sa skupa nacionalnog značaja štampano u celini |
Opis
Vladić G., Bošnjaković G., Kašiković N., Banjanin B., Pinćjer I., Dedijer S.: Percepcija revijalnog modnog oglasa, uticaj konvencionalne lepote modela, 1. Naučna konferencija sa međunarodnim učešćem: Savremeni trendovi I inovacije u tekstilnoj industriji, Beograd: Union of engineers and technicians of Serbia, 18 Maj, 2018, pp. 366-372 |
Kriterijum produkcije
(M63) Saopštenje sa skupa nacionalnog značaja štampano u celini |
Opis
Adamović (Majkić) S., Prica M., Szilágyi A., Kašiković N., Milošević R., Banjanin B.: Fizičko-mehaničkaI optička karakterizacija Tetra pak ambalaže, 11. ETIKUM, Novi Sad, 6-8 Decembar, 2017, pp. 189-192, ISBN 978-86-6022-00-68 |
Kriterijum produkcije
(M63) Saopštenje sa skupa nacionalnog značaja štampano u celini |
Opis
Milošević R., Stančić M., Banjanin B.: Analiza svojstava sita kao najuticajnijeg elementa u tehnici sito štampe, 10. Conference of Chemists, Technologists and Environmentalists of Republic of Srpska, Banja Luka: Univerzitet u Banjoj Luci, Tehnološki fakultet, 15-16 Novembar, 2013, pp. 491-500, ISBN 978-99938-54-50-0 |
Kriterijum produkcije
(M63) Saopštenje sa skupa nacionalnog značaja štampano u celini |
Opis
Puškarević I., Banjanin B., Milošević R.: Principi održivog razvoja u primeni grafičkog oblikovanja, 10. Conference of Chemists, Technologists and Environmentalists of Republic of Srpska, Banja Luka: Univerzitet u Banjoj Luci, Tehnološki fakultet, 15-16 Novembar, 2013, pp. 513-522, ISBN 978-99938-54-50-0 |
Kriterijum produkcije
(M63) Saopštenje sa skupa nacionalnog značaja štampano u celini |
Opis
Adamović (Majkić) S., Milošević R., Banjanin B., Tomić I., Adamović D., Mihailović A., Dramićanin M.: Gasovite zagađujuće materije u radnom okruženju tampon mašine, International Scientific Conference ETIKUM (14 ; Novi Sad ; 2023), Str. 185-188, ISBN 978-86-6022-617-6, Izdavač: University of Novi Sad, Faculty of technical sciences, Department of production engineering |
Kriterijum produkcije
(M64) Saopštenje sa skupa nacionalnog značaja štampano u izvodu |
Opis
Nedeljković U., Banjanin B., Dudaš N.: Defining “skeletal” lines as aid in designing various styles of monolinear typeface, 15. International Conference on Printing, Design and Graphic Communications - Blaž Baromić, Senj: Croatian Society of Graphic Artists, Croatia, 16-19 Septembar, 2015, pp. 32-33 |
Kriterijum produkcije
(M71) Odbranjena doktorska disertacija |
Opis
Banjanin B.: Karakterizacija proizvodnih parametara alata za utiskivanje izrađenih tehnikom 3D štampe, Novi Sad, University of Novi Sad, Faculty of technical sciences, Department of graphic engineering and design, 2018, str. 1-238 |
