Asst. Prof. Jovan Šulc


Missing picture!

Jovan Šulc

Assistant Professor


Telephone021/485-2128
E-mail
Academic titleAssistant Professor
Employee's biography not found!
Assistant Professor
01.02.2017.
PositionFromToOrganizational unit
Assistant with PhD23.09.2016.Chair of Mechatronics, Robotics and Automation
Assistant - Master01.12.2013.01.09.2016.Chair of Mechatronics, Robotics and Automation
TitleIn institution
Kvantifikacija curenja vazduha pod pritiskom

Bachelor's thesis

Mathematical Science

Povišenje energetske efikasnosti programabilnog pneumatskog manipulatora u kontaktnim zadacima

PhD thesis

Industrial Engineering and Management

Faculty of Technical Sciences

2016

Criterium of productionDescription
() Research published in the prominent international journalŠešlija D., Milenković I., Dudić S., Šulc J.: Improving Energy Efficiency in Compressed Air Systems - Practical Experiences, Thermal Science, 2016, ISSN 0354-9836
() Research published in the prominent international journalŠulc J., Bajči B., Reljić V., Milenković I., Šešlija D., Dudić S.: Automatic manipulator for remote measurement of linear dimensions—development and integration in education courses, Computer Applications in Engineering Education, 2018, Vol. 26, No 4, pp. 947-958, ISSN 1061-3773
() Research published in the prominent international journalReljić V., Milenković I., Bajči B., Šešlija D., Šulc J.: Remotely controlled compressed air spring—Design and implementation for distance education, Computer Applications in Engineering Education, 2018, pp. 1-10, ISSN 1061-3773
() Research published in the international journalŠešlija D., Čajetinac S., Blagojević V., Šulc J.: Application of pulse width modulation and by-pass valve control for increasing energy efficiency of pneumatic actuator system, Proceedings of the Institution of Mechanical Engineers. Part I: Journal of Systems and Control Engineering, 2018, ISSN 0959-6518
() Report from the international meeting printed in its entiretyBajči B., Reljić V., Šulc J., Šešlija D., Dudić S.: Remotely Controlled Measurement of Linear Dimensions, 8. PSU-UNS International Conference on Engineering and Technology - ICET, Novi Sad: Faculy of Technical Scicences, Novi Sad, 8-10 Jun, 2017, pp. 1-4, ISBN 978-86-7892-934-2
() Report from the international meeting printed in its entiretyReljić V., Bajči B., Šulc J., Šešlija D., Dudić S.: Remote Control of Pneumatic Circular Manipulator Using CEyeClon Platform, 4. Experiment@ International Conference, Faro: University of Algarve, Faro, 6-8 Jun, 2017, pp. 103-104, ISBN 978-1-5386-0810-4
() Report from the international meeting printed in its entiretyŠulc J., Šešlija D., Reljić V., Bajči B., Čajetinac S.: PWM Control of Coupled Motion of Two Axis Pneumatic Programmable Manipulator, 13. International Conference on Systems, Automatic Control and Measurements SAUM, Niš, 9-11 Novembar, 2016
() Report from the international meeting printed in its entiretyŠešlija D., Šulc J., Dudić S., Milenković I.: Remote control of pneumatic actuator via wireless communication, 16. International Scientific Conference on INDUSTRIAL SYSTEMS - IS, Novi Sad: Faculty of Technical Sciences, Department of Industrial Engineering and Management, 15-17 Oktobar, 2014, pp. 107-111, ISBN 978-86-7892-652-5
() Report from the international meeting printed in its entiretyŠulc J., Reljić V., Bajči B., Šešlija D.: Design and Development of Experimental Setup for Analysis and Synthesis of Control Laws in Manipulator Contact with Environment, 3. International Scientific Conference "Conference on Mechanical Engineering Technologies and Applications" - COMETa, Jahorina: Faculty of Mechanical Engineering, East Sarajevo, 7-9 Decembar, 2016, pp. 87-92, ISBN 978-99976-623-7-8
() Report from the international meeting printed in its entiretyReljić V., Vidicki P., Bajči B., Šešlija D., Šulc J.: Using of remote controlled pneumatic spring in teaching, 6. Technics and Informatics in Education - TIE, Čačak: Faculty of Technical Sciences, Čačak, 28-29 Maj, 2016, pp. 391-396, ISBN 978-86-7776-192-9, UDK: 621.398:37.018.43
() Report from the international meeting printed in its entiretyReljić V., Bajči B., Šulc J., Šešlija D., Dudić S.: Remote control of pneumatic circular manipulator using CompactRIO controller, 6. Technics and Informatics in Education - TIE, Čačak: Faculty of Technical Sciences, Čačak, 28-29 Maj, 2016, pp. 385-390, ISBN 978-86-7776-192-9, UDK: 621.398:621.316]:004.738.5
() Report from the international meeting printed in its entiretyReljić V., Šešlija D., Šulc J., Bajči B., Dudić S., Milenković I.: Modular Construction of Circular Manipulator as a Test Bed for Testing Pneumatic Control, 9. The 9th International Symposium - KOD 2016 - Machine and Industrial Design in Mechanical Engineering, Balatonfured: Faculty of Technical Sciences, Novi Sad, Faculty of Engineering, Hunedoara, Faculty of Engineering, Szeged, 9-12 Jun, 2016, pp. 225-228, ISBN 978-86-7892-821-5
() Report from the international meeting printed in its entiretySrndaljčević V., Bajči B., Šešlija D., Šulc J., Reljić V., Dudić S., Milenković I.: Image Analysis as a Method of Quantifying the Effectivness of Pneumatic Nozzles, 3. International Conference on Electrical, Electronic and Computing Engineering IcETRAN, Zlatibor: ETRAN Society, School of Electrical Engineering, 13-16 Jun, 2016, pp. 1-4, ISBN 978-86-7466-618-0
() Report from the international meeting printed in its entiretyŠulc J., Reljić V., Bajči B., Šešlija D., Buač T.: Development of Pneumatic Valve Remote Control, 8. PSU-UNS International Conference on Engineering and Technology - ICET, Novi Sad: Faculy of Technical Scicences, Novi Sad, 8-10 Jun, 2017, pp. 1-4, ISBN 978-86-7892-934-2
() Report from the international meeting printed in its entiretyBajči B., Dudić S., Šulc J., Milenković I., Šešlija D., Reljić V.: Remote System for Measuring Geometric Tolerances: Roundness, 13. International Conference on Remote Engineering and Virtual Instrumentation - REV, Madrid: UNED Madrid, 24-26 Februar, 2016, pp. 279-280, ISBN 978-1-4673-8245-8
() Report from the international meeting printed in its entiretyŠulc J., Šešlija D., Srndaljčević V.: Influence of Pneumatic Cylinder Damping on Consumption of Compressed Air, 3. Regional Conference - Mechatronics in Practice and Education (MECHEDU), Subotica, 14-16 Maj, 2015, pp. 175-178, ISBN 978-86-918815-0-4, UDK: 007.5(082)
() Report from the international meeting printed in its entiretyŠulc J., Šešlija D., Dudić S., Milenković I.: Implementation of Remote Laboratory for Measuring Linear Dimensions in the Process of e-Learning, 3. Experiment@ International Conference, Azores, 2-4 Jun, 2015, pp. 65-66, ISBN 978-989-20-5753-8
() Report from the international meeting printed in its entiretyReljić V., Milenković I., Šešlija D., Dudić S., Šulc J.: Development of Remote Controlled Pneumatic Spring, 12. International Scientific Conference "Flexible Technologies" - MMA, Andrevlje: Faculty of Technical Sciences, Novi Sad, 25-26 Septembar, 2015, pp. 195-198, ISBN 978-86-7892-722-5
() Report from the international meeting printed in its entiretyŠešlija D., Šulc J.: Modeling of Robotic Tool Penetration in Workpiece using FEM, 2. Regional Conference - Mechatronics in Practice and Education (MECHEDU), Subotica: Subotica Tech - College of Applied Sciences, 5-6 Decembar, 2013, pp. 75-78, ISBN 978-86-7892-565-8
() Report from the international meeting printed in its entiretyBajči B., Dudić S., Šulc J., Reljić V., Šešlija D., Milenković I.: Using Remotely Controlled One-way Flow Control Valve for Speed Regulation of Pneumatic Cylinder, 15. International Conference on Remote Engineering and Virtual Instrumentation, Dusseldorf: University of Applied Sciences Duesseldorf, Germany, 21-23 Mart, 2018, pp. 8-15
() Report from the international meeting printed in its entiretyBajči B., Šulc J., Reljić V., Šešlija D., Dudić S., Milenković I.: Remote Laboratory for Learning Basics of Pneumatic Control, 14. International Conference on Remote Engineering and Virtual Instrumentation - REV, New York: Columbia University, New York, 15-17 Mart, 2017, pp. 144-150, ISBN 978-3-319-64351-9
() Report from the international meeting printed in its entiretyBajči B., Reljić V., Šulc J., Šešlija D., Dudić S.: Remotely Controlled Measurement of Linear Dimensions, 8. PSU-UNS International Conference on Engineering and Technology - ICET, Novi Sad: Faculty of Technical Sciences, Novi Sad, 8-10 Jun, 2017, pp. 1-4, ISBN 978-86-7892-934-2
() Report from the international meeting printed in its entiretyŠulc J., Reljić V., Bajči B., Šešlija D., Buač T.: Development of Pneumatic Valve Remote Control, 8. PSU-UNS International Conference on Engineering and Technology - ICET, Novi Sad: Faculty of Technical Sciences, Novi Sad, 8-10 Jun, 2017, pp. 1-4, ISBN 978-86-7892-934-2
() Report from the international meeting printed in its entiretyBajči B., Reljić V., Milenković I., Šulc J., Vidicki P.: Using a Remotely Controlled Automated Device for Measuring Linear Dimensions in Teaching Activities in Secondary Vocational Schools, 17. International Scientific Conference on INDUSTRIAL SYSTEMS - IS, Novi Sad: Faculty of Technical Sciences, 4-6 Oktobar, 2017, pp. 142-147, ISBN 978-86-7892-978-6
() Report from the international meeting printed in its entiretyŠulc J., Bajči B., Šešlija D., Dudić S.: Case studies – reducing consumption of compressed air in casings food industry , 17. International Scientific Conference on INDUSTRIAL SYSTEMS - IS, Novi Sad: Faculty of Technical Sciences, 4-6 Oktobar, 2017, pp. 102-107, ISBN 978-86-7892-978-6
() Report from the international meeting printed in its entiretyMilenković I., Šešlija D., Dudić S., Šulc J.: Waste oil management in compressed air systems – regulation analysis, 16. International Scientific Conference on INDUSTRIAL SYSTEMS - IS, Novi Sad: Faculty of Technical Sciences, Department of Industrial Engineering and Management, 15-17 Oktobar, 2014, pp. 33-37, ISBN 978-86-7892-652-5
() Report from the international meeting printed in its entiretyŠešlija D., Šulc J., Reljić V.: Energy Efficient Pneumatic Control Scheme with Recirculation of the Used Air, 2. Regional Conference - Mechatronics in Practice and Education (MECHEDU), Subotica: Subotica Tech - College of Applied Sciences, 5-6 Decembar, 2013, pp. 71-74, ISBN 978-86-7892-565-8
() Report from the international meeting printed in its entiretyBajči B., Šulc J., Reljić V., Šešlija D., Dudić S., Milenković I.: Remote Laboratory for Learning Basics of Pneumatic Control, 14. International Conference on Remote Engineering and Virtual Instrumentation - REV, New York: Columbia University, New York, 15-17 Mart, 2017, pp. 118-124
() Research published in the scientific journalReljić V., Bajči B., Milenković I., Šulc J., Šešlija D., Dudić S.: Development of an Experimental Setup for Remote Testing of Pneumatic Control, International Journal of Online Engineering (iJOE), 2018, Vol. 14, No 1, pp. 195-202, ISSN 1861-2121
() Research published in the scientific journalReljić V., Šešlija D., Šulc J.: Razvoj daljinski upravljane pneumatske opruge, Zbornik radova Fakulteta tehničkih nauka, 2014, No 8/2014, pp. 1781-1784, ISSN 0350-428X, UDK: 681.5
() Research published in the scientific journalŠulc J.: Kvantifikacija curenja vazduha pod pritiskom, Zbornik radova Fakulteta tehničkih nauka, 2009, No 5/2009, pp. 1797-1800, ISSN 0350-428X
() Research published in the scientific journalŠulc J., Šešlija D., Dudić S., Milenković I.: Remote Laboratory for Measuring Linear Dimensions in the Process of E-Learning, International Journal of Online Engineering (iJOE), 2016, Vol. 12, No 4, ISSN 1861-2121
() Research published in the scientific journalSrndaljčević V., Šulc J., Šešlija D.: Razvoj uređaja za ispitivanje energetske efikasnosti pneumatskih mlaznica, Zbornik radova Fakulteta tehničkih nauka, 2015, No 11/2015, pp. 2153-2156, ISSN 0350-428X, UDK: 621.8
() Research published in the scientific journalBajči B., Šulc J., Šešlija D.: Modeliranje PWM upravljanja dvoosnim pneumatskim manipulatorom, Zbornik radova Fakulteta tehničkih nauka, 2015, No 11/2015, pp. 2149-2152, ISSN 0350-428X, UDK: 007.5
() Report from the meeting of the national importance printed in its entiretyReljić V., Šešlija D., Dudić S., Milenković I., Šulc J., Bajči B.: Upravljanje na daljinu pneumatskim kružnim manipulatorom, 22. Trendovi razvoja TREND, Zlatibor: Fakultet tehničkih nauka, Novi Sad, 16-19 Februar, 2016, pp. 103-106, ISBN 978-86-7892-795-9
() Report from the meeting of the national importance printed in its entiretyŠulc J., Reljić V., Bajči B., Šešlija D.: Design and Development of Experimental Setup for Analysis and Synthesis of Control Laws in Manipulator Contact with Environment, 3. International Scientific Conference "Conference on Mechanical Engineering Technologies and Applications" - COMETa, Jahorina: Faculty of Mechanical Engineering, East Sarajevo, 7-9 Decembar, 2016, pp. 87-92, ISBN 978-99976-623-7-8
() Report from the meeting of the national importance printed in its entiretyReljić V., Milenković I., Šešlija D., Dudić S., Šulc J.: Development of Remote Controlled Pneumatic Spring, 12. International Scientific Conference "Flexible Technologies" - MMA, Andrevlje: Faculty of Technical Sciences, Novi Sad, 25-26 Septembar, 2015, pp. 195-198, ISBN 978-86-7892-722-5
() Report from the meeting of the national importance printed in its entiretyŠulc J., Šešlija D., Reljić V., Milenković I., Dudić S.: Razvoj i implementacija daljinskog upravljanja opruge u kursevima mehatroničkog i industrijskog inženjerstva, 59. ETRAN - Konferencija za elektroniku, telekomunikacije, računarstvo, automatiku i nuklearnu tehniku, Srebrno jezero: Etran, Društvo za ETRAN, Elektrotehnički fakultete, Beograd, 8-11 Jun, 2015, pp. 1-4, ISBN 978-86-80509-72-3
() Defended Doctoral dissertationŠulc J.: Povišenje energetske efikasnosti programabilnog pneumatskog manipulatora u kontaktnim zadacima, Novi Sad, Fakultet tehničkih nauka, 2016
() Prototype, new methods, software, standardized and certified instrumentReljić V., Milenković I., Šešlija D., Dudić S., Šulc J.: Dalјinski upravlјana pneumatska opruga, 2015
() Prototype, new methods, software, standardized and certified instrumentTanović M., Šešlija D., Šulc J., Milenković I., Dudić S.: Dalјinsko upravlјanje pneumatskim cilindrom, 2015
() Prototype, new methods, software, standardized and certified instrumentDudić S., Šulc J., Bajči B., Milenković I., Šešlija D.: Manipulator za automatsko merenјe dužinskih mera u laboratorijskim uslovima, 2015
() Prototype, new methods, software, standardized and certified instrumentŠulc J., Dudić S., Šešlija D., Milenković I.: Laboratorijski uređaj za dalјinsko merenje dužinskih mera primenom digitalnog pomičnog merila, 2015
() Prototype, new methods, software, standardized and certified instrumentBajči B., Reljić V., Dudić S., Šulc J., Milenković I., Šešlija D.: Automatski uređaj za merenje tolerancija oblika - kružnost, 2018
TitleScientific areaHigher education institutionElection date
Assistant ProfessorMehatronika, robotika i automatizacija i integrisani sistemiUniversity of Novi Sad01.02.2017.
Assistant - MasterMechatronics, Robotics and Automation and Intelligent SystemsFaculty of Technical Sciences01.12.2016.
Assistant - MasterMechatronics, Robotics and Automation and Intelligent SystemsFaculty of Technical Sciences01.12.2013.
Ministry of Science Scollar on PhD StudiesMechatronics, Robotics and Automation and Integral Systems14.11.2012.