Asst. Prof. Sanja Kojić


Missing picture!

Sanja Kojić

Assistant Professor


Telephone021/485-4520
E-mail
Academic titleAssistant Professor

PhD Sanja Kojić (female) is an Assistant Professor at the Faculty of Technical Sciences (FTS), University of Novi Sad (UNS), Serbia. She received an MSc degree in 2010, and a PhD degree in 2022 from FTS-UNS, in electrical engineering. Author of over 70 articles, including over 30 in leading peer-reviewed journals with impact factors and two patents. Her scientific papers have been cited 260 times and her h-index is 8. Her areas of research cover microfluidics, flexible, printed and green electronics, mechanical and microscopic characterisation, and archaeology. Dr Kojić has more than ten years of work experience on national and international projects (Horizon Europe, H2020, FP7, ERASMUS, TEMPUS, EUREKA, COST, NATO). She was proclaimed the assistant with the largest number of scientific papers: at the Department of Energy, Electronics and Telecommunications in 2018 and at the Department of Electronics in 2019. While in 2023, she was recipient of the  annual award of the Faculty of Technical Sciences for the achieved result in scientific and research work. She runs a volunteering program at Engineering Creativity Center of the University of Novi Sad, where students can get access and training to the newest fabrication equipment for the textile, flexible and printed electronics as well as microfluidic chips. She is the mother of a girl.

Assistant Professor
29.10.2022.
PositionFromToOrganizational unit
Assistant - Master29.10.2019.28.10.2022.Chair of Electronics
Research Associate30.10.2017.Department of Power, Electronic and Telecommunication Engineering
Intern Researcher01.11.2013.Department of Power, Electronic and Telecommunication Engineering
TitleIn institution
Realizacija programabilnog kontrolera za izbor aktivne topologije

Bachelor's thesis

Electrical and Computer Engineering

Faculty of Technical Sciences

2010

Design, Fabrication and Testing of Microfluidic Chips for Biomedical Application

PhD thesis

Electrical and Computer Engineering

Faculty of Technical Sciences

2023

Criterium of productionDescription
() Researches published in the journals of the international importanceRadović M., Dubourg G., Kojić S., Dohčević-Mitrović Z., Stojadinović B., Bokorov M., Crnojević-Bengin V.: Laser sintering of screen-printed TiO2 nanoparticles for improvement of mechanical and electrical properties, Ceramics International, 2018, Vol. 44, No 9, pp. 10975-10983, ISSN 0272-8842
() Researches published in the journals of the international importanceWagle S., Kovačević B., Walker D., Ionescu C., Shah U., Stojanović G., Kojić S., Mooranian A., Al-Salami H.: Alginate-based drug oral targeting using bio-micro/nano encapsulation technologies, Expert Opinion on Drug Delivery, 2020, Vol. 17, No. 10, pp. 1361-1376, ISSN 1744-7593
() Researches published in the journals of the international importanceErceg T., Vukić (Skerlić) N., Šovljanski O., Teofilović V., Porobić S., Baloš S., Kojić S., Terek P., Banjanin B., Rakić S.: Preparation and characterization of biodegradable cellulose acetate-based films with novel plasticizer obtained by polyethylene terephthalate glycolysis intended for active packaging, Cellulose, 2023, ISSN 0969-0239
() Research published in the top international journalStojanović G., Radovanović M., Kojić S., Milić L., Simić M., Kojić T., Georges Duval R., Vukmirović J., Petrović B.: Temperature sensors manufactured from edible materials intended for oral cavity operation, International Journal of Precision Engineering and Manufacturing-Green Technology, 2023, ISSN 2198-0810
() Research published in the top international journalPetrović B., Kojić S., Milić L., Luzio A., Perić T., Marković E., Stojanović G.: Toothpaste ingestion-evaluating the problem and ensuring safety: systematic review and meta-analysis, Frontiers in Public Health, 2023, Vol. 11, pp. 1-12, ISSN 2296-2565
() Research published in the top international journalPopović Ž., Thiha A., Ibrahim F., Petrović B., Dahlan N., Milić L., Kojić S., Stojanović G.: Oral micro‑electronic platform for temperature and humidity monitoring, Scientific Reports, 2023, Vol. 13, No. 21277, pp. 1-12, ISSN 2045-2322
() Research published in the top international journalKovacevic B., Raj Wagle S., Mihaela Ionescu C., Jones M., Lewkowicz M., YM Wong E., Kojić S., Stojanović G., Đanić (Stojančević) M., Mikov M., Mooranian A., Al-Salami H.: Novel hydrogel comprising non-ionic copolymer with various concentrations of pharmacologically active bile acids for cellular injectable gel, Colloids and surfaces B: Biointerfaces, 2023, Vol. 222, pp. 1-11, ISSN 0927-7765
() Research published in the top international journalAnisa Dahlan N., Thiha A., Ibrahim F., Milić L., Muniandy S., Fauzani Jamaluddin N., Petrović B., Kojić S., Stojanović G.: Role of Nanomaterials in the Fabrication of bioNEMS/MEMS for Biomedical Applications and towards Pioneering Food Waste Utilisation, Nanomaterials, 2022, Vol. 12, No. 22, pp. 1-41, ISSN 2079-4991
() Research published in the top international journalRadovanović M., Stojanović G., Simić M., Suvara D., Milić L., Kojić S., Škrbić B.: Edible Electronic Components Made from Recycled Food Waste, Advanced Electronic Materials, 2024, No. 2300905, pp. 1-13, ISSN 2199-160X
() Research published in the top international journalKojić S., Stojanović G., Radonić V.: Novel Cost-Effective Microfluidic Chip Based on Hybrid Fabrication and Its Comprehensive Characterization, Sensors, 2019, Vol. 19, No 7, pp. 1-18, ISSN 1424-8220
() Research published in the top international journalJovanović N., Petrović B., Kojić S., Šipovac M., Marković D., Stefanović S., Stojanović G.: Primary Teeth Bite Marks Analysis on Various Materials: A Possible Tool in Children Health Risk Analysis and Safety Assessment, International Journal of Environmental Research and Public Health, 2019, Vol. 16, No 13, pp. 1-12, ISSN 1660-4601
() Research published in the top international journalBobić Z., Kojić S., Stojanović G., Terek V., Kovačević L., Terek P.: Nanotopography Evaluation of NiTi Alloy Exposed to Artificial Saliva and Different Mouthwashes, Materials, 2022, Vol. 15, No. 23, pp. 8705-8705, ISSN 1996-1944
() Research published in the top international journalQureshi S., Milić L., Petrović B., Vejin M., Kojić S., Jarić S., Stojanović G.: The Measurement of Contact Angle, pH, and Conductivity of Artificial Saliva and Mouthwashes on Enamel, Glass-Ionomer, and Composite Dental Materials, Materials, 2022, Vol. 15, No. 13, pp. 1-15, ISSN 1996-1944
() Research published in the top international journalPetrović B., Stilinović N., Tomas Petrović A., Kojić S., Stojanović G.: Determination of salivary concentrations of leptin and adiponectin, ability to reduce ferric ions and total antioxidant capacity of saliva in patients with severe early childhood caries, Frontiers in Pediatrics, 2022, ISSN 2296-2360
() Research published in the prominent international journalStojanović G., Pojić M., Kojić S., Mišan A., Vasiljević D.: Mechanical properties of edible biofilm as a substrate for printed electronics, Applied Physics. A: Materials Science and Processing, 2019, Vol. 125, No 576, ISSN 0947-8396
() Research published in the prominent international journalSamae M., Ritmetee P., Chirasatitsin S., Kojić S., Kojić T., Jevremov J., Stojanović G., Al Salami H.: Precise manufacturing and performance validation of paper-based passive microfluidic micromixers, International Journal of Precision Engineering and Manufacturing, 2019, ISSN 2234-7593
() Research published in the prominent international journalRadovanović M., Kojić S., Vasiljević D., Stojanović G.: Characterization of LC sensor structures realized by PCB and LTCC technology for determining moisture in building materials, Processing and Application of Ceramics, 2018, Vol. 12, No 1, pp. 13-20, ISSN 1820-6131
() Research published in the prominent international journalStefanović S., Petrović B., Porčić M., Penezić K., Pendić J., Dimitrijević V., Živaljević I., Vuković S., Jovanović J., Kojić S., Starović A., Blagojević T.: Bone spoons for prehistoric babies: detection of human teeth marks on the Neolithic artefacts from the site Grad-Starčevo (Serbia), PLOS ONE, 2019, Vol. 14, No 12, pp. 1-38, ISSN 1932-6203
() Research published in the prominent international journalVukmirović J., Tripković Đ., Bajac B., Kojić S., Stojanović G., Srdić V.: Comparison of barium titanate thin films prepared with inkjet printing and spin coating, PROCESSING and APPLICATION of CERAMICS, 2015, Vol. 9, pp. 151-156, ISSN 1820-6131
() Research published in the prominent international journalStavrakis A., Kojić S., Petrović B., Nešković (Marković) I., Stojanović G.: Performance Evaluation of Dental Flosses Pre- and Post-Utilization, Materials, 2022, Vol. 15, No. 4, pp. 1-14, ISSN 1996-1944
() Research published in the prominent international journalĐoc´osˇ M., Aung T., Vejin M., Movrin D., Fauzani Jamaluddin N., Kojić S., Petrović B., Ibrahim F., Stojanović G.: Analysis of Covarine Particle in Toothpaste Through Microfluidic Simulation, Experimental Validation, and Electrical Impedance Spectroscopy, ACS Omega, 2024, Vol. 2024, ISSN 2470-1343
() Research published in the international journalThamphiwatana S., Phairatana T., Chirasatitsin S., Samae M., Velvé Casquillas G., Al-Salami H., Kojić S., Stojanović G.: A microfuidic micromixer fabricated using polydimethylsiloxane-based platform for biomedical applications, MIDEM - Journal of microelectronics, electronic components and materials, 2018, Vol. 48, No 3, pp. 173-179, ISSN 0352-9045, UDK: 621.3:(53+54+621+66)
() Research published in the international journalStojanović G., Lečić N., Kojić S., Vasiljević D.: Characterization of customized ferrite cores for a compact six-phase coupled inductor, International Journal of Applied Electromagnetics and Mechanics, 2018, Vol. 57, pp. 19-27, ISSN 1383-5416
() Research published in the international journalKojić S., Ajkalo S., Gužvica M., Vasiljević D., Radovanović M., Stojanović G.: A Counter of Number of Products on the Shelf – Influences on Capacitance of Interdigitated Capacitor with Application in Intelligent Packaging, Informacije MIDEM - Journal of microelectronics, electronic components and materials, 2014, Vol. 44, No 4, pp. 321-329, ISSN 0352-9045, UDK: 621.3:(53 54 621 66)
() Research published in the journal of the international importance verified by the special resolutionPetrović B., Marković E., Perić T., Kojić S.: Challenges in Experimental Evaluation of Morphological, ChemoMechanical and Adhesive Properties of Glass-ionomer Based Dental Materials , Advanced Technologies and Materials, 2019, Vol. 44, No 2, pp. 25-30, ISSN 2620-0325
() Collection of the International scientific conferencesSanja Kojić, Srđan Ajkalo, Miloš Gužvica, Dragana Vasiljević, Milan Radovanović, Goran M. Stojanović "Influence of the Position of Electrodes on Capacitance of Interdigitated Capacitor Fabricated on Flexible Foil", INDEL 2012
() Report from the international meeting printed in its entiretyĐoćoš M., Brdar S., Vejin M., Petrović B., Milić L., Kojić S.: A Python-based Pipeline for Processing and Plotting Automatisation of Nanoindentation Data: Plotting with GraphPad Prism software, 21. International Symposium INFOTEH-JAHORINA (INFOTEH), Jahorina, 16-18 March, 2022, pp. 1-4
() Report from the international meeting printed in its entiretyKojić S., Ajkalo S., Gužvica M., Vasiljević D., Radovanović M., Stojanović G.: Influence of the position of the electrodes on capacitance of interdigitated capacitor fabricated on flexible foil, 8. International Symposium on Industrial Electronics (INDEL), Banja Luka, 4-6 Novembar, 2010, pp. 308-312, ISBN 987-99955-46-14-4
() Report from the international meeting printed in its entiretyVasiljević D., Kojić S., Pivaš B., Medić D., Tadić A., Mirković S., Radovanović M.: Cost-effective interdigitated capacitive sensors for efficient bacteria detection, 15. Infoteh-Jahorina, Jahorina, 16-18 Mart, 2016, pp. 11-14, ISBN 978-99955-763-9-4
() Report from the international meeting printed in its entiretyŽlebič Č., Kisić M., Blaž N., Menićanin A., Živanov Lj., Damnjanović M., Kojić S.: Ink-jet printed strain sensor on polyimide substrate, 36. International Spring Seminar on Electronics Technology, Alba Iulia, 8-12 Maj, 2013, pp. 409-414
() Report from the international meeting printed in extractsDubourg G., Kojić S., Matović J., Crnojević-Bengin V.: Rapid fabrication of paperbased MEMS strain sensor using a laser micromachining process, 12. Micro and Nano Engineering, Hague, 2015
() Report from the international meeting printed in extractsTripković Đ., Vukmirović J., Bajac B., Kojić S., Mojić B., Stojanović G., Srdić V.: Characterization of BaTiO3 films fabricated by ink-jet printing process, 10. Students’ Meeting, Processing and Application of Ceramics, Novi Sad, 6-9 Novembar, 2013, pp. 43-43
() Invited lectures from the meeting of the national importance printed in its entiretyKojić S., Stojanović G., Vasiljević D., Samardžić N.: Mogućnosti ink-jet štampane elektronike, 1. International Scientific Conference "Metrology and Quality in Production Engineering and Environmental Protection" - ETIKUM, Novi Sad, 12-13 Jun, 2013, pp. 35-38, ISBN 978-86-7892-512-2
() Report from the meeting of the national importance printed in its entiretyKojić S., Bednar N., Vasiljević D., Radovanović M., Samardžić N.: Merenje i kontrola materijala u nanotehnologijama, 1. International Scientific Conference "Metrology and Quality in Production Engineering and Environmental Protection" - ETIKUM, Novi Sad, 12-13 Jun, 2013, pp. 27-30, ISBN 978-86-7892-512-2
() Realized patent, breed, sort or race, architectural, civil and urban original work Kojić S., Ajkalo S., Stojanović G., Gužvica M., Vasiljević D., Radovanović M.: Metod i sistem za senzorski podržano inteligentno praćenje stanja objekta na polici, Beograd, Glasnik intelektualne svojine, 2014, str. 18-19, ISBN 2217-9143
TitleScientific areaHigher education institutionElection date
Assistant ProfessorElectronicsUniversity of Novi Sad29.10.2022.
Assistant - MasterElectronicsFaculty of Technical Sciences29.10.2019.
Research AssociateElectronicsFaculty of Technical Sciences30.10.2017.
Professional Studies ProfessorElectronicsFaculty of Technical Sciences30.10.2013.
Ministry of Science Scollar on PhD StudiesElectronics14.11.2012.