Assoc. Prof. Jovan Dorić


Missing picture!

Jovan Dorić

Associate Professor


Telephone021/485-2373
E-mail
Academic titleAssociate Professor
Employee's biography not found!
Associate Professor
15.10.2017.
PositionFromToOrganizational unit
Assistant Professor15.10.2012.Chair of Engines and Vehicles
Assistant with PhD11.06.2012.01.09.2012.Department of Mechanization and Design Engineering
Assistant - Master23.11.2010.01.05.2012.Department of Mechanization and Design Engineering
Teaching Associate01.01.2009.01.11.2010.Department of Mechanization and Design Engineering
Function nameFromOrganizational unit
Head of Chair01.10.2018.Chair of Engines and Vehicles
Function nameFromToOrganizational unit
Head of Chair01.02.2017.Chair of Engines and Vehicles
TitleIn institution
Koncepcija bezventilskog četvorotaktnog motora SUS sa potpunim širenjem radnog tela

Bachelor's thesis

Mechanical Engineering

Faculty of Technical Sciences

2008

Unapredjenje efektivnosti motora SUS primenom nekonvencionalnog klipnog mehanizma

PhD thesis

Mechanical Engineering

Faculty of Technical Sciences

2012

Koncepcija bezventilskog četvorotaktnog motora SUS sa potpunim širenjem radnog tela

Master's thesis

Mechanical Engineering

Faculty of Technical Sciences

2008

Criterium of productionDescription
() Monographic study/chapter in M11 or research in the thematic collection of the leading international importanceAdamović D., Dorić J., Vojinović-Miloradov M.: BTEX in the Exhaust Emissions of Motor Vehicles, New York, Springer New York Heidelberg Dordrecht London, 2013, str. 333-343, ISBN 978-1-4614-7587-3, UDK: DOI 10.1007/978-1-4614-7588-0
() Researches published in the journals of the international importanceAdamović D., Dorić J., Vojinović-Miloradov M., Adamović (Majkić) S., Pap S., Radonić (Jakšić) J., Turk Sekulić M.: The emission of BTEX compounds during movement of passenger car in accordance with the NEDC, Science of the Total Environment, 2018, Vol. 639, pp. 339-349, ISSN 0048-9697
() Research published in the prominent international journalDorić J., Klinar I.: Efficiency of a new IC engine concept with variable piston motion, Thermal Science, 2014, Vol. 18, No 1, pp. 113-127, ISSN 0354-9836, UDK: 651
() Research published in the prominent international journalDorić J., Klinar I.: Efficiency characteristics of a new Quasi-Constant Volume Combustion spark ignition engine, Thermal Science, 2013, Vol. 17, No 1, pp. 119-133, ISSN 0354-9836, UDK: 651
() Research published in the prominent international journalDorić J., Klinar I.: The realisation and analysis of a new thermodynamic cycle for internal combustion engine, Thermal Science, 2011, Vol. 15, No 4, pp. 961-974, ISSN 0354-9836, UDK: 651
() Research published in the international journalNakomčić-Smaragdakis B., Čepić Z., Živančev (Šenk) N., Dorić J., Radovanović Petrovi Lj.: Use of scrap tires in cement production and their impact on nitrogen and sulfur oxides emissions, Energy Sources Part A-Recovery Utilization and Environmental Effects, 2016, Vol. 38, No 4, pp. 485-493, ISSN 1556-7036, UDK: DOI 10.1080/15567036.2013.787473
() Research published in the journal of the international importance verified by the special resolutionNikolić N., Torović T., Antonić Ž., Dorić J.: An Algorithm for Obtaining Conditional Wear Diagram of IC Engine Crankshaft Main Journals, FME Transactions, 2011, Vol. 39, No 4, pp. 157-164, ISSN 1451-2092
() Research published in the journal of the international importance verified by the special resolutionČavić M., Penčić M., Rackov M., Dorić J., Lu Z.: Graphical Synthesis of 6-bar Dwell Linkage Mechanism, FME Transactions, 2018, ISSN 1451-2092, UDK: (accepted for publication)
() Report from the international meeting printed in its entirety***Dorić J.: Constant power spark ignition engine, IOP Conference Series: Materials Science and Engineering, 2018, Vol. 393, pp. 1-6, ISSN 1757-8981- <u>Nije povezan skup</u><font style="color:#cc0000;">**greska**</font>
() Report from the international meeting printed in its entiretyNikolić N., Dorić J., Stojić B.: A computer program for IC engine crankshaft main bearings wear diagrams, 10. Simpozijum o konstruisanju, oblikovanju i dizajnu – KOD, Novi Sad, 6-8 Jun, 2018, ISBN 1757-899X
() Report from the international meeting printed in its entiretyNikolić N., Antonić Ž., Dorić J., Jocanović M.: INFLUENCE OF LOAD AND OIL VISCOSITY ON STRIBECK CURVE SHAPE FOR LONG JOURNAL BEARING, 9. International Conference on Innovative Technologies IN-TECH, Zagreb: Faculty of Engineering, University of Rijeka, 5-7 Septembar, 2018, pp. 13-16
() Report from the international meeting printed in its entiretyRaspopović N., Dorić J., Grujić I., Nikolić N.: ANALYSIS OF HYBRID TURBOCHARGER IN MOTOR VEHICLE IC ENGINE, 6. International Congress Motor Vehicles Motors - MVM, Kragujevac: Faculty of Engineering, University of Kragujevac, 6-8 Oktobar, 2016, pp. 219-226, ISBN 978-86-6335-055-7
() Report from the international meeting printed in its entiretyGrujić I., Dorić J., Stojanović N., Davinić A., Pešić R., Sunny N.: NUMERICAL MODELING OF IC ENGINE COMBUSTION PROCESS , 6. International Congress Motor Vehicles & Motors - MVM, Kragujevac: Faculty of Engineering, University of Kragujevac,, 6-8 Oktobar, 2016, pp. 213-218, ISBN 978-86-6335-055-7
() Report from the international meeting printed in its entiretyNikolić N., Dorić J., Tadić N.: INFLUENCE OF IC ENGINE CRANKSHAFT MAIN JOURNALS LENGTHS ON MAIN BEARINGS LOAD, 8. International Conference on Innovative Technologies IN-TECH, Ljubljana, 11-13 Septembar, 2017, pp. 21-24, ISBN 0184-9069
() Report from the international meeting printed in its entiretyDorić J., Vujičić L., Nikolić N.: Simulation of working process in IC Engine, 17. Symposium on Thermal Science and Engineering of Serbia – SIMTERM, Soko Banja: Society of Thermal Engineers of Serbia, 20-23 Oktobar, 2015, pp. 983-987, ISBN 978-86-6055-097-4
() Report from the international meeting printed in its entiretyDorić J., Nikolić N.: Load analysis of crankshaft drive with the use computer simulation, 17. Symposium on Thermal Science and Engineering of Serbia – SIMTERM, Soko Banja: Symposium on Thermal Science and Engineering of Serbia, 20-23 Oktobar, 2015, pp. 977-981
() Report from the international meeting printed in its entiretyDorić J., Nikolić N.: New Internal Combustion Engine, 9. The 9th International Symposium - KOD 2016 - Machine and Industrial Design in Mechanical Engineering, Balatonfured: Faculty of technical sciences - Novi Sad, 9-12 Jun, 2016, pp. 105-108, ISBN 978-86-7892-821-5, UDK: 658.512.2
() Report from the international meeting printed in its entiretyNikolić N., Dorić J., Jocanović M.: A computer program for the visualization of IC engine crankshaft main bearings load, 9. The 9th International Symposium - KOD 2016 - Machine and Industrial Design in Mechanical Engineering, Balatonfured: Faculty of technical sciences, 9-12 Jun, 2016, pp. 89-92, ISBN 978-86-7892-821-5, UDK: 658.512.2
() Report from the international meeting printed in its entiretyDorić J., Nikolić N., Galamboš S.: Unconventional flat double acting I.C. engine, 6. International Congress Motor Vehicles & Motors - MVM, Kragujevac: Fakultet inženjerskih nauka, 6-8 Oktobar, 2016, pp. 57-63, ISBN 978-86-6335-037-3, UDK: 629.3
() Report from the international meeting printed in its entiretyNikolić N., Dorić J., Raspopović N.: Influence of air leakage in the air-intake system on some operation parameters of an automobile spark-ignition engine, 6. International Congress Motor Vehicles & Motors - MVM, Kragujevac: Fakultet inženjerskih nauka, 6-8 Oktobar, 2016, pp. 51-56, ISBN 978-86-6335-037-3, UDK: 629.3
() Report from the international meeting printed in its entiretyGalamboš S., Dorić J., Ružić D.: Wind effects on the agricultural spraying using CFD simulations, 6. International Congress Motor Vehicles & Motors - MVM, Kragujevac: Fakultet inženjerskih nauka, 6-8 Oktobar, 2016, pp. 277-282, ISBN 978-86-6335-037-3, UDK: 629.3
() Report from the international meeting printed in its entiretyDorić J., Mišić M.: Impact of rod ratio on wear diagram of IC engine crankshaft journal bearing, 25. Nauka i motorna vozila, Beograd: Yugoslav Society of Automotive Engineers, 14-15 April, 2015, pp. 262-271, ISBN 978-86-80941-39-4
() Report from the international meeting printed in its entiretyGalamboš S., Dorić J.: Design and analysis of car body using CFD software, 12. International Conference on Accomplishments in Electrical and Mechanical Engineering and Information Technology - DEMI, Banja Luka: Univerzitet u Banjoj Luci, 29-30 Maj, 2015, pp. 693-697, ISBN 978-99938-39-53-8, UDK: 621.3(048)
() Report from the international meeting printed in its entiretyNikolić N., Klinar I., Dorić J., Raspopović N.: Influence of the faulty MAP sensor on some operation parameters of an automobile spark-ignition engine, 12. International Conference on Accomplishments in Electrical and Mechanical Engineering and Information Technology - DEMI, Banja Luka: Univerzitet u Banjoj Luci, 29-30 Maj, 2015, pp. 719-723, ISBN 978-99938-39-53-8, UDK: 621.03(048)
() Report from the international meeting printed in its entiretyDorić J., Kovač A., Nikolić N., Galamboš S., Klinar I.: Improving performance of spark ignition engine using variable length intake manifold, 12. International Conference on Accomplishments in Electrical and Mechanical Engineering and Information Technology - DEMI, Banja Luka: Univerzitet u Banjoj Luci, 29-30 Maj, 2015, pp. 627-633, ISBN 978-99938-39-53-8, UDK: 621.3(048)
() Report from the international meeting printed in its entiretyDorić J., Jelisavac B., Ružić D.: One method for modelling motorcycle frame, 4. Conference on Innovative Technologies IN-TECH2013, Budimpešta, 10-13 Septembar, 2013, pp. 15-18, ISBN 1849-0662
() Report from the international meeting printed in its entiretyAdamović D., Vojinović-Miloradov M., Dorić J., Miloradov M., Adamović (Majkić) S.: Optimal Working Regime of IC Engine from the Point of Emission Characteristics, 12. International Scientific Conference "Flexible Technologies" - MMA, Andrevlje: Faculty of Technical Sciences, Departmant of Production Engineering, 25-26 Septembar, 2015, pp. 207-210, ISBN 978-86-7892-722-5
() Report from the international meeting printed in its entiretyDorić J., Klinar I.: Efficiency of radial-rotary IC engine, 17. Symposium on Thermal Science and Engineering of Serbia – SIMTERM, Soko Banja: Society of Thermal Engineers of Serbia, 20-23 Oktobar, 2015, pp. 1004-1009, ISBN 978-86-6055-076-9
() Report from the international meeting printed in its entiretyNikolić N., Dorić J., Antonić Ž.: Some aspects of temperature distribution in IC engine crankshaft bearing, 17. Symposium on Thermal Science and Engineering of Serbia – SIMTERM, Soko Banja: Society of Thermal Engineers of Serbia, 20-23 Oktobar, 2015, pp. 1010-1015, ISBN 978-86-6055-076-9
() Report from the international meeting printed in its entiretyAdamović D., Vojinović-Miloradov M., Dorić J., Adamović (Majkić) S.: Urban Driving and Emission of Carcinogenic Substances, 5. Towards a humane city, Novi Sad: Faculty of Technical Sciences, 5-6 Novembar, 2015, pp. 433-437, ISBN 978-86-7892-739-3
() Report from the international meeting printed in its entiretyDorić J., Klinar I.: Modelling of Internal Combustion Engine with Longer Piston dwell, 8. International Symposium - KOD - Machine and Industrial Design in Mechanical Engineering, Balatonfured: Faculty of Technical Sciences, 12-15 Jun, 2014, pp. 101-105, ISBN 978-86-7892-615-0, UDK: 658.512.2
() Report from the international meeting printed in its entiretyAdamović D., Vojinović-Miloradov M., Dorić J., Adamović (Majkić) S., Mihajlović I.: Benzene Emission During NEDC, 20. 20th International Symposium on Analytical and Environmental Problems, Szeged: SZAB Kémiai Szakbizottság Analitikai és Környezetvédelmi Munkabizottsága, 22 Septembar, 2014, pp. 102-105, ISBN 978-963-12-1161-0
() Report from the international meeting printed in its entiretyStojić B., Časnji F., Poznić A., Dorić J.: Design concept choice for agricultural transport vehicle based on given technical and working conditions, 40. Actual Tasks on Agricultural Engineering, Opatija: Sveučilište u Zagrebu, Agronomski fakultet, Zavod za mehanizaciju poljoprivrede, 21-24 Februar, 2012, pp. 171-180, ISBN ISSN 1333-265, UDK: 631
() Report from the international meeting printed in its entiretyDorić J., Klinar I., Nikolić N., Stojić B.: Use of natural gas in agricultural machinery, 40. Actual Tasks on Agricultural Engineering, Opatija: Sveučilište u Zagrebu Agronomski Fakultet, Hrvatska, 21-24 Februar, 2012, pp. 149-160, ISBN 1333-2651, UDK: 631
() Report from the international meeting printed in its entiretyDorić J., Klinar I., Nikolić N.: Realisation of dwell motion mechanism with non-circular gears, 7. Simpozijum o konstruisanju, oblikovanju i dizajnu – KOD, Balatonfured: Faculty of technical sciences, 24-26 Maj, 2012, pp. 345-348, ISBN 978-86-7892-399-9, UDK: 621
() Report from the international meeting printed in its entiretyNikolić N., Torović T., Antonić Ž., Dorić J.: A Comparative Approach to the Load Determination of IC Engine Main Bearings, 7. International Symposium about machine and industrial design in mechanical engineering - KOD 2012, Balatonfured, 24-26 Maj, 2012, pp. 199-204, ISBN 978-86-7892-399-9, UDK: 621
() Report from the international meeting printed in its entiretyAdamović D., Dorić J., Vojinović-Miloradov M., Turk Sekulić M., Radonić (Jakšić) J., Krajinović S., Adamović (Majkić) S.: BTEX in the exhaust emissions of motor vehicles, 1. Global Conference on Global Warming, Istanbul: Istanbul Technical University (ITU) / International Association for Hydrogen Energy, 8-12 Jul, 2012, pp. 1165-1171, ISBN ISBN 978-605-89885-1
() Report from the international meeting printed in its entiretyDorić J., Nikolić N., Klinar I.: Unconventional variable displacement internal combustion engine, 1. International Conference on Innovative Technologies IN-TECH 2012, Rijeka: Faculty of Engineering University of Rijeka, 26-29 Septembar, 2012, pp. 35-39, ISBN 978-953-6326-77-8
() Report from the international meeting printed in its entiretyDorić J., Raspopović N., Klinar I.: Improvement of test stand for internal combustion engine, 17. Motorna vozila i motori MVM, Kragujevac: Faculty of Engineering, University of Kragujevac, 3-5 Oktobar, 2012, pp. 186-191, ISBN 978-86-86663-91-7
() Report from the international meeting printed in its entiretyDorić J., Raspopović N., Adamović D., Antonić Ž., Klinar I.: One method for measurement of benzene, toluene, ethylbenzene and xylene (BTEX) in spark ignition engine , 17. Motorna vozila i motori MVM, Kragujevac: Faculty of Engineering, University of Kragujevac, 3-5 Oktobar, 2012, pp. 192-199, ISBN 978-86-86663-91-7
() Report from the international meeting printed in its entiretyNikolić N., Torović T., Antonić Ž., Dorić J.: Investigation of usage possibilities of a mean value engine model in simulation of IC engine intake system faults, 1. International Conference on Innovative Technologies IN-TECH 2012, Rijeka: Faculty of Engineering, University of Rijeka, 26-29 Septembar, 2012, pp. 125-129, ISBN 978-953-6326-77-8
() Report from the international meeting printed in its entiretyAntonić Ž., Nikolić N., Torović T., Dorić J.: A Mathematical Model for Determining Some Tribological Characteristics of Plain Journal Bearing, 1. International Conference on Innovative Technologies IN-TECH 2012, Rijeka: Faculty of Engineering, University of Rijeka, 26-29 Septembar, 2012, pp. 349-352, ISBN 978-953-6326-77-8
() Report from the international meeting printed in its entiretyKaranović N., Čepić Z., Dorić J., Mihajlović I., Stošić M., Vojinović-Miloradov M.: End-of-life-vehicles: source of Fe-metals and environmental imapct of schredder plant in Serbia, 17. The international conference Engineering of Environment Protection - TOP, Časta-Papiernička: Slovak University of Technology in Bratislava, Faculty of Mechanical Engineering, 14-16 Jun, 2011, pp. 125-130, ISBN 978-80-227-3519-3
() Report from the international meeting printed in its entiretyDorić J., Klinar I., Čepić Z.: One approach for improvement of spark ignition engine efficiency, 15. Symposium on Thermal Science and Engineering of Serbia, Soko Banja: Mašinski fakultet Univerziteta u Nišu, 18-21 Oktobar, 2011, pp. 742-751, ISBN 978-86-6055-018-9
() Report from the international meeting printed in its entiretyDorić J.: One Approach for Modeling Miller Cycle Engine, 10. CAR — The International Congress on Automotive, Pitešti: FISITA, 2-4 Novembar, 2011, ISBN 1453-1100
() Report from the international meeting printed in its entiretyDorić J., Klinar I.: Efficiency of a Valveless IC engine with more complete expansion, 1. International Conference on Innovative Technologies IN-TECH, Prague, 14-16 Septembar, 2010
() Report from the international meeting printed in its entiretyDorić J., Klinar I.: Construction of non-conventional internal combustion engine, 6. Simpozijum o konstruisanju, oblikovanju i dizajnu – KOD, Palić, 29-30 Septembar, 2010, pp. 293-296, ISBN 978-86-7892-278-7
() Report from the international meeting printed in its entiretyDorić J., Klinar I.: Kinematic analysis of piston mechanism in valveless internal combustion engines with more complete expansion, , 2010, pp. 397-405, 3. International Congress Motor Vehicles and Motors, Kragujevac: Mašinski Fakultet u Kragujevcu, 7-9 Oktobar, 2010, pp. 397-405, ISBN 978-86-86663-58-0
() Report from the international meeting printed in its entiretyKlinar I., Dorić J.: One method vor determining the limit values of diagnostic parameters of I.C. engine piston-cylinder assemblies, 6. Simpozijum o konstruisanju, oblikovanju i dizajnu – KOD, Palić: Fakultet tehničkih nauka, 29-30 Septembar, 2010, pp. 305-310, ISBN 978-86-7892-278-7
() Report from the international meeting printed in its entiretyDorić J., Pilić V., Bešić I., Hodolič J.: Application of reverse engineering based on feature recognition, 10. International Scientific Conference "Flexible Technologies" - MMA, Novi Sad, 9-10 Oktobar, 2009, pp. 125-128
() Report from the international meeting printed in extractsAdamović D., Vojinović-Miloradov M., Dorić J., Adamović (Majkić) S., Obrovski B., Radonić (Jakšić) J., Turk Sekulić M.: Benzene concentration levels in exhaust gas of experimental engine, 23. International Scientific Conference "Engineering for Environment Protection" – TOP, Šamorin-Čilistov: Slovak University of Technology, 20-22 Septembar, 2017, pp. 1-1, ISBN 978-80-227-4731-8
() Report from the international meeting printed in extractsAdamović D., Vojinović-Miloradov M., Miloradov M., Dorić J., Adamović (Majkić) S., Radonić (Jakšić) J., Turk Sekulić M.: Residual toluene concentrations in exhaust gas waste stream, 21. TOP 2015-Engineering of environment protection, Bratislava: Slovak University of Technology in Bratislava, 23-25 Jun, 2015, pp. 17-17, ISBN 978-80-227-4376-1
() Report from the international meeting printed in extractsAgarski B., Dorić J., Milanković D., Kljajin M., Antić A., Vukelić Đ.: Life Cycle Assessment of Internal Combustion Engine Constructions, 20. SETAC Europe - LCA Case Study Symposium, Novi Sad: SETAC, 24-26 Novembar, 2014, pp. 59-60, ISBN 2310-3191
() Report from the international meeting printed in extractsAdamović D., Vojinović-Miloradov M., Dorić J., Radonić (Jakšić) J., Adamović (Majkić) S., Raspopović N.: Benzene in motor vehicle exhaust, 14. European Meeting on Environmental Chemistry (14th EMEC), Budva: Nacionalna biblioteka Crne Gore, 4-7 Decembar, 2013, pp. 81-82, ISBN 978-9940-9059-1-0
() Monograph of the national importance, monographic edition,Dorić J.: Teorija motora SUS, Novi Sad, Fakultet tehnilčkih nauka , 2015, str. 1-421, ISBN 978-86-7892-717-1, UDK: 621.43(075.8)
() Monographic bibliographic publicationStojić B., Poznanović N., Ružić D., Dorić J.: Drumska vozila, Novi Sad, Fakultet tehničkih nauka, 2015, str. 1-249, ISBN 978-86-7892-660-0, UDK: 629.3(075.8)
() Chapter in the M41 or research in the thematic collection of the national importanceDorić J., Klinar I., Torović T.: Mogućnosti unapređenja efikasnosti termodinamičkog ciklusa motora SUS, Novi Sad, Fakultet tehničkih nauka, 2010, str. 176-198, ISBN 978-86-7892-253-4, UDK: 631.372
() Chapter in the M41 or research in the thematic collection of the national importanceDorić J., Klinar I., Antonić Ž.: Dinamička analiza klipnog mehanizma bezventilskog motora SUS sa potpunijim širenjem radnog tela, Novi Sad, Fakultet tehničkih nauka, 2010, str. 199-217, ISBN 978-86-7892-253-4, UDK: 631.372
() Chapter in the M41 or research in the thematic collection of the national importanceAntonić Ž., Nikolić N., Dorić J.: Termo i hidrodinamička analiza ležišta kolenastog vratila motora SUS, Novi Sad, Fakultet tehničkih nauka Novi Sad, 2010, str. 152-175, ISBN 978-86-7892-253-4, UDK: 631.372
() Research published in the leading journal of the national importanceLončarević Z., Dorić J.: Analysis of cam phasing influence on performance of internal combustion engine, Machine Design, 2018, Vol. 10, No 1, pp. 17-20, ISSN 1821-1259
() Research published in the leading journal of the national importanceDorić J., Klinar I.: Influence of conrod length on wear diagram of I.C. engine crankshaft bearing, Machine Design, 2016, Vol. 7, No 4, pp. 125-128, ISSN 1821-1259
() Research published in the leading journal of the national importanceDorić J.: Wire Winding Machine Design, Machine Design, 2016, Vol. 8, No 2, pp. 69-72, ISSN 1821-1259
() Research published in the leading journal of the national importanceDorić J., Klinar I.: Unapređenje procesa dovođenja toplote radnom telu motora SUS, Traktori i pogonske mašine, 2013, Vol. 18, No 3, pp. 26-34, ISSN 0354-9496, UDK: 631,372
() Research published in the leading journal of the national importanceDorić J., Klinar I.: Jedan metod merenja pritiska u cilindru motora SUS, Traktori i pogonske mašine, 2013, Vol. 18, No 3, pp. 34-41, ISSN 0354-9496, UDK: 631.372
() Research published in the leading journal of the national importanceDorić J., Klinar I.: Jedan metod unapređenja koeficijenta punjanja , Traktori i pogonske mašine, 2013, Vol. 18, No 3, pp. 41-49, ISSN 0354-9496, UDK: 631.372
() Research published in the leading journal of the national importanceNikolić N., Torović T., Antonić Ž., Dorić J.: Simulacija neispravnosti u usisnom sistemu pomoću osrednjenog modela motora, Traktori i pogonske mašine, 2012, Vol. 17, No 2-3, pp. 105-111, ISSN 0354-9496, UDK: 631.372
() Research published in the leading journal of the national importanceAntonić Ž., Nikolić N., Torović T., Dorić J.: Jedan selektivan metod crtanja Štribekovog dijagrama za dugo klizno radijalno ležište , Traktori i pogonske mašine, 2012, Vol. 17, No 2-3, pp. 78-84, ISSN 0354-9496, UDK: 631.372
() Research published in the leading journal of the national importanceDorić J., Klinar I., Dorić M.: Constant Volume Combustion Cyle for IC Engine, FME Transactions, 2011, Vol. 39, No 3, pp. 97-104, ISSN 1451-2092
() Research published in the leading journal of the national importanceDorić J., Ružić D., Klinar I., Stojić B.: Unapređenje efikasnosti parcijalnih karakteristika oto motora, Traktori i pogonske mašine, 2011, Vol. 16, No 2, pp. 54-60, ISSN 0354-9496, UDK: 631.372
() Research published in the leading journal of the national importanceDorić J., Klinar I., Antonić Ž., Dorić M., Stojić B.: Poređenje performansi oto motora pogonjenih primarnim i alternativnim gorivom, Traktori i pogonske mašine, 2011, Vol. 16, No 2, pp. 61-67, ISSN 0354-9496, UDK: 631.372
() Research published in the leading journal of the national importanceAntonić Ž., Nikolić N., Torović T., Dorić J.: JEDAN MATEMATIČKI MODEL ZA ODREĐIVANJE RASPODELE TEMPERATURE U KLIZNOM RADIJALNOM LEŽIŠTU, Traktori i pogonske mašine, 2011, Vol. 16, No 4, pp. 56-62, ISSN 0354-9496, UDK: 631.372
() Research published in the leading journal of the national importanceStojić B., Časnji F., Poznić A., Dorić J.: Modulizacija poljoprivrednog transportera, Traktori i pogonske mašine, 2011, Vol. 16, No 4, pp. 7-12, ISSN 0354-9496, UDK: 631.372
() Research published in the leading journal of the national importanceStojić B., Časnji F., Poznić A., Dorić J.: Preliminarna analiza osnova za izbor koncepta i konstruktivnih parametara poljoprivrednog transportera, Traktori i pogonske mašine, 2011, Vol. 16, No 4, pp. 13-20, ISSN 0354-9496, UDK: 631.372
() Research published in the leading journal of the national importanceNikolić N., Antonić Ž., Dorić J.: Uporedni prikaz dva analitička postupka konstruisanja polarnog dijagrama opterećenja glavnih ležišta kolenastog vratila, IMK-14 - Istraživanje i razvoj, 2011, Vol. 1, No 38, pp. 3-10, ISSN 0354-6829, UDK: 621
() Research published in the leading journal of the national importanceDorić J., Klinar I., Nikolić N.: Nekonvencionalni osmotaktni ciklus motora sa unutrašnjim sagorevanjem, IMK-14 - Istraživanje i razvoj, 2011, Vol. 40, No 3, pp. 31-36, ISSN 0354-6829, UDK: 621
() Research published in the leading journal of the national importanceDorić J., Klinar I.: Uticaj entropije na izlazne parametre pogonskih oto motora SUS, Poljoprivredna tehnika, 2010, No 1, pp. 1-10, ISSN 0554-5587, UDK: 631(059)
() Research published in the journal of the national importanceDorić J.: Poređenje karakteristika oslobađanja toplote korišćenjem dizela i biodizela kao pogonskog goriva motora SUS, Traktori i pogonske mašine, 2017, Vol. 22, No 3/4, pp. 54-58, ISSN 0354-9496, UDK: 631.372
() Research published in the journal of the national importanceKovač A., Dorić J.: Poboljšanje koeficijenta punjenja motora SUS primenom usisne grane promenljive dužine, Traktori i pogonske mašine, 2016, Vol. 21, No 2/3, pp. 19-26, ISSN 0354-9496, UDK: 657.474
() Research published in the journal of the national importanceBabić I., Dorić J., Vujičić L.: Unapređenje rada prehranjivanog dizel motora primenom električnog kompresora , Traktori i pogonske mašine, 2016, Vol. 21, No 2/3, pp. 34-42, ISSN 0354-9496, UDK: 657.474
() Research published in the journal of the national importanceVujičić L., Dorić J.: Dinamička analiza klipnog mehanizma motora SUS primenom računarom podržanih tehnologija, Traktori i pogonske mašine, 2016, Vol. 21, No 2/3, pp. 27-33, ISSN 0354-9496, UDK: 657.474
() Research published in the journal of the national importanceDorić J.: Motor SUS dvoradnog dejstva, Traktori i pogonske mašine, 2016, Vol. 21, No 2/3, pp. 7-10, ISSN 0354-9496, UDK: 657.474
() Research published in the journal of the national importanceDorić J., Nikolić N.: Double acting piston engine, Machine Design, 2016, Vol. 8, No 3, pp. 107-110, ISSN 1821-1259
() Research published in the journal of the national importanceGalamboš S., Dorić J., Klinar I.: Design and analysis of car model by CFD software, Machine Design, 2015, Vol. 7, No 2, pp. 67-68, ISSN 1821-1259
() Research published in the journal of the national importanceGalamboš S., Ružić D., Dorić J., Stojić B.: Analiza uticaja vetra na poljoprivredno prskanje pomoću CFD simulacije, Traktori i pogonske mašine, 2015, Vol. 20, No 2, pp. 60-65, ISSN 0354-9496, UDK: 631
() Research published in the journal of the national importanceDorić J., Mišić M.: Uticaj dužine klipnjače na habanje kolenastog vratila motora SUS, Traktori i pogonske mašine, 2015, Vol. 20, No 3/4, pp. 7-14, ISSN 0354-9496, UDK: 631
() Research published in the journal of the national importanceDorić J.: Uticaj sagorevanja pri konstantnoj zapremini na toksičnost produkta sagorevanja, Traktori i pogonske mašine, 2015, Vol. 20, No 3/4, pp. 15-20, ISSN 0354-9496, UDK: 631
() Research published in the journal of the national importanceDorić J., Galamboš S.: Simulacija rada turbo-kompresora prehranjivanog traktorskog motora, Traktori i pogonske mašine, 2015, Vol. 20, No 3/4, pp. 28-34, ISSN 0354-9496, UDK: 631
() Research published in the journal of the national importanceDorić J., Mladenović V., Galamboš S.: Eksploatacija turbokompresora u motorima SUS, Traktori i pogonske mašine, 2015, Vol. 20, No 3/4, pp. 35-44, ISSN 0354-9496, UDK: 631
() Research published in the journal of the national importanceGalamboš S., Raspopović N., Dorić J.: Eksperimentalno postrojenje za ispitivanje brzohodnih motora SUS, Traktori i pogonske mašine, 2015, Vol. 20, No 3/4, pp. 51-54, ISSN 0354-9496, UDK: 631
() Research published in the journal of the national importanceJović M., Dorić J.: Prilog ispitivanju pogonskih karakteristika OTO motora, Traktori i pogonske mašine, 2015, Vol. 20, No 3/4, pp. 61-66, ISSN 0354-9496, UDK: 631
() Research published in the journal of the national importanceDorić J., Kostić M., Klinar I.: Analiza otkaza sistema za recirkulaciju produkata sagorevanja, Traktori i pogonske mašine, 2015, Vol. 20, No 3/4, pp. 74-81, ISSN 0354-9496, UDK: 631
() Research published in the journal of the national importanceDorić J., Vidić B.: Diagnostics of IC engine piston-cylinder assemblies, Tehnička dijagnostika, 2015, Vol. 14, No 2, pp. 28-33, ISSN 1451-1975, UDK: 62 (497.11)
() Research published in the journal of the national importanceDragosavljević V., Dorić J.: Uticaj režima rada na habanje letećih rukavaca kolenastog vratila motora SUS, Traktori i pogonske mašine, 2014, Vol. 19, No 3, pp. 72-78, ISSN 0354-9496, UDK: 629.06
() Research published in the journal of the national importanceDorić J., Klinar I.: Numerička analiza uticaja antifrikcionih prevlaka na efikasnost traktorskih dizel motora, Traktori i pogonske mašine, 2014, Vol. 19, No 3, pp. 65-71, ISSN 0354-9496, UDK: 629.06
() Research published in the journal of the national importanceDorić J., Klinar I.: Motori sa unutrašnjim sagorevanjem konstantne snage, Traktori i pogonske mašine, 2014, Vol. 19, No 3, pp. 57-64, ISSN 0354-9496, UDK: 629.06
() Research published in the journal of the national importanceDorić J., Klinar I.: Mogućnosti unapređenja traktorskih motora kroz primenu dezaksijalnih klipnih mehanizama, Traktori i pogonske mašine, 2014, Vol. 19, No 3, pp. 49-56, ISSN 0354-9496, UDK: 629.06
() Research published in the journal of the national importanceDorić J.: Unconventional Miller Engine, Scientific Bulletin, Automotive, 2012, Vol. 17, No 21, pp. 112-122, ISSN 1453-1100
() Research published in the journal of the national importanceDorić J., Raspopović N., Klinar I., Stojić B.: Novo laboratorijsko postrojenje za ispitivanje motora SUS, Traktori i pogonske mašine, 2012, Vol. 17, No 2/3, pp. 64-70, ISSN 0354-9496, UDK: 631.372
() Research published in the journal of the national importanceDorić J., Klinar I., Antonić Ž.: Jedan metod verifikacije simulacije rada motora SUS, Traktori i pogonske mašine, 2012, Vol. 17, No 2/3, pp. 56-63, ISSN 0354-9496, UDK: 631.372
() Research published in the journal of the national importanceDorić J., Klinar I., Nikolić N.: Izbor matematičkog modela toplotnih proračuna dizel motora, Traktori i pogonske mašine, 2012, Vol. 17, No 2/3, pp. 48-55, ISSN 0354-9496, UDK: 631.372
() Research published in the journal of the national importanceRužić D., Dorić J.: Značaj osobina otpadnih ulja poljoprivredne mehanizacije Significance of the agricultural machinery waste oil characteristics, Traktori i pogonske mašine, 2010, Vol. 15, No 4, pp. 46-50, ISSN 0354-9496, UDK: 628.4, 631.3
() Research published in the journal of the national importanceDorić J., Klinar I., Simikić M.: Primena savremenih materijala za izradu ventila kod motora sa unutrašnjim sagorevanjem, Traktori i pogonske mašine, 2010, Vol. 15, No 2/3, pp. 34-41, ISSN 0354-9496, UDK: 631.372
() Research published in the journal of the national importanceTorović T., Nikolić N., Antonić Ž., Klinar I., Dorić J.: Tehnička eksploatacija, održavanje i remont aktuelnih sistema za napajanje motora komprimovanim prirodnim gasom, Traktori i pogonske mašine, 2010, Vol. 15, No 2/3, pp. 86-93, ISSN 0354-9496, UDK: 631.372
() Research published in the journal of the national importanceDorić J., Klinar I.: KINEMATSKA ANALIZA KLIPNOG MEHANIZMA BEZVENTILSKOG MOTORA SUS SA POTPUNIJIM ŠIRENJEM RADNOG TELA, Mobility and Vehicle Mechanics, 2010, Vol. 36, No 4, pp. 7-20, ISSN 1450-5304, UDK: 621+629(0.5)=802.0
() Research published in the journal of the national importanceKlinar I., Torović T., Antonić Ž., Nikolić N., Dorić J.: Neki aspekti primene CNG za pogon motornih vozila, Traktori i pogonske mašine, 2009, Vol. 14, No 2/3, pp. 75-82, ISSN 0354-9496
() Research published in the journal of the national importanceTorović T., Nikolić N., Antonić Ž., Klinar I., Dorić J.: Analiza konstruktivnih i eksploatacionih svojstava aktuelnih sistema za napajanje motora prirodnim gasom, Traktori i pogonske mašine, 2009, Vol. 14, No 2/3, pp. 65-74, ISSN 0354-9496
() Research published in the journal of the national importanceDorić J.: Bezventilski motor SUS sa potpunim širenjem radnog tela, Traktori i pogonske mašine, 2009, Vol. 14, No 2/3, pp. 58-64, ISSN 0354-9496
() Research published in the scientific journalDorić J.: IMPROVEMENT OF TURBO DISESEL IC ENGINE WITH ELECTRIC COMPRESSOR , Machine Design, 2017, Vol. 9, No 2, pp. 61-64, ISSN 1821-1259
() Research published in the scientific journalAdamović D., Vojinović-Miloradov M., Miloradov M., Dorić J., Adamović (Majkić) S., Radonić (Jakšić) J., Turk Sekulić M.: Residual Toluene Concentrations in Exhaust Gas Waste Stream of Motor Vehicle, Applied Mechanics and Materials, 2016, Vol. 832, pp. 137-143, ISSN 1662-7482, UDK: doi: 10.4028/www.scientific.net/AMM.832.137
() Research published in the scientific journalDorić J., Klinar I., Dorić M.: One approach for modelling intermittent motion mechanism with noncircular gears, Machine Design, 2011, Vol. 3, No 2, pp. 121-127, ISSN 1821-1259, UDK: 62-11:658.512.2
() Research published in the scientific journalPilić V., Dorić J., Hodolič J., Bešić I., Vukelić Đ.: Short contribution of application of reverse engineering based on feature recognition, Education, Research and Innovation, 2010, Vol. 3, No 2, pp. 14-18, ISSN 1337-9089
() Research published in the scientific journalGrujic I., Stojanovic N., Dorić J., Glisovic J., Narayan ., Davinić A.: ENGINE LOAD IMPACT ON MAXIMUM VALUE OF NORMAL FORCE IN PISTON MEHANISM , Traktori i pogonske mašine, 2018, Vol. 23, No 1/2, pp. 10-16, ISSN 0354-9496, UDK: 631.312.021.3:621.791.3.004.67
() Research published in the scientific journalDorić J., Raspopovic N.: UNAPREĐENJE RADA PREHRANJIVANOG BENZINSKOG MOTORA PRIMENOM HIBRIDNOG TURBOKOMPRESORA , Traktori i pogonske mašine, 2018, Vol. 23, No 2/3, pp. 6-11, ISSN 0354-9496, UDK: 631.312.021.3:621.791.3.004.67
() Report from the meeting of the national importance printed in its entiretyDorić J.: Analiza parametara na akumulativnost međumesne linije, 4. Međunarodni simpozijum : Novi Horizonti, Doboj: Saobraćajni fakultet Doboj, 22-23 Novembar, 2013, pp. 47-53, ISBN 978-99955-36-57-2
() Report from the meeting of the national importance printed in extractsAdamović D., Vojinović-Miloradov M., Dorić J., Adamović (Majkić) S., Turk Sekulić M., Radonić (Jakšić) J.: Emisija toluena u uslovima gradske vožnje, 7. Simpozijum Hemija i zaštita životne sredine sa međunarodnim učešćem - EnviroChem, Palić: Srpsko hemijsko deuštvo, 9-12 Jun, 2015, pp. 69-70, ISBN 978-86-7132-058-0
() Report from the meeting of the national importance printed in extractsAdamović D., Dorić J., Adamović (Majkić) S., Radonić (Jakšić) J., Prica M.: Aromatična jedinjenja u izduvnim gasovima motornih vozila , 6. 6. simpozijum Hemija i zaštita životne sredine EnviroChem 2013, sa međunarodnim učešćem, Vršac: Srpsko hemijsko društvo, Beograd, Srbija, 21-24 Maj, 2013, pp. 158-159, ISBN 978-86-7132-052-8
() Report from the meeting of the national importance printed in extractsDorić J., Klinar I.: Ekološke i eksploatacione karakteristike Oto motora pogonjeni tečnim naftnim gasom, 16. GAS, Kladovo: Udruženje za gas Srbije, 17-20 Maj, 2011, ISBN 0354-8589, UDK: 662.76
() Report from the meeting of the national importance printed in extractsTorović T., Antonić Ž., Nikolić N., Dorić J.: OSNOVNE KARAKTERISTIKE PETE GENERACIJE UREĐAJA ZA TNG, 16. GAS, Kladovo, 17-20 Maj, 2011, ISBN YUISSN0354 - 8589, UDK: 662.76
() Report from the meeting of the national importance printed in extractsKlinar I., Dorić J.: Bezbednosno-tehnički i pravni aspekti primene prirodnog gasa za pogon motornih vozila, 15. GAS, Vrnjačka Banja, 18-21 Maj, 2010, pp. 1-6, ISBN 0354-8589, UDK: 662.76
() Defended Doctoral dissertationDorić J.: Unapređenje efektivnosti motora SUS primenom nekonvencionalnog klipnog mehanizma, Novi Sad, Fakultet tehničkih nauka, 2012, str. 1-289, UDK: 621
() New laboratory facilty, new experimental facilty, new technological procedureDorić J., Klinar I., Raspopović N., Dakić B., Nikolić N., Antonić Ž.: Novo eksperimentalno postrojenje za ispitivanje motora sa unutrašnjim sagorevanjem, 2012
() Realized patent, breed, sort or race, architectural, civil and urban original work Dorić J.: Unconventional double acting piston internal combustion engine 2016/1105, Beograd, Zavoz za intelektualnu svojinu Republike Srbije, 2016, str. 1-13, ISBN 2016/0347
() Realized patent, breed, sort or race, architectural, civil and urban original work Dorić J.: Motor SUS sa varijabilnim kretanjem klipa broj priznatog patenta 53805, Beograd, Zavod za intelektualnu svojinu Republike Srbije, 2015, str. 60-60, UDK: 631
() Realized patent, breed, sort or race, architectural, civil and urban original work Dorić J.: Motor SUS sa dužim zadržavanjem klipa u blizini SMT2015/0257, Beograd, Zavod za intelektualnu svojinu Republike Srbije, 2015
() Realized patent, breed, sort or race, architectural, civil and urban original work Dorić J.: Radijalno-rotacioni bezventilski motor SUS sa potpunijim širenjem radnog tela broj priznatog patenta 52086 , Beograd, Zavod za intelektualnu svojinu Republike Srbije, Bilten, 2012, str. 1403-1403, ISBN 0354-771X, UDK: 631.372
TitleScientific areaHigher education institutionElection date
Associate ProfessorMotorna vozila i motori SUSUniversity of Novi Sad15.10.2017.
Assistant ProfessorMotorna vozila i motori SUSUniversity of Novi Sad15.10.2012.
Assistant with PhDInternal Combustion EnginesFaculty of Technical Sciences12.12.2011.
Assistant - MasterInternal Combustion EnginesFaculty of Technical Sciences23.11.2010.
Teaching AssociateInternal Combustion EnginesFaculty of Technical Sciences19.12.2009.
Teaching AssociateInternal Combustion EnginesFaculty of Technical Sciences19.12.2008.