Asst. Prof. Pal Terek


Missing picture!

Pal Terek

Assistant Professor


Telephone021/485-2330
E-mail
Academic titleAssistant Professor
Employee's biography not found!
Assistant Professor
01.04.2017.
PositionFromToOrganizational unit
Assistant with PhD21.09.2016.Chair of Forming Technologies and Surface Engineering
Assistant - Master01.01.2016.01.09.2016.Chair of Forming Technologies and Surface Engineering
Research Associate25.05.2011.01.12.2015.Department of Production Engineering
Intern Researcher04.06.2008.01.05.2011.Department of Production Engineering
TitleIn institution
Primena racunara i eksperimentalnih istraživanja za rešavanje problematike poroznosti Al-Si-Cu odlivaka

Bachelor's thesis

Mechanical Engineering

Faculty of Technical Sciences

2007

Unapređenje kvaliteta alata za livenje pod pritiskom primenom tehnologija inženjerstva površina

PhD thesis

Mechanical Engineering

Faculty of Technical Sciences

2016

Criterium of productionDescription
() Researches published in the journals of the international importanceKovačević L., Terek P., Kakaš D., Miletić A.: A correlation to describe interfacial heat transfer coefficient during solidification of Al–Si alloy casting, Journal of Materials Processing Technology, 2012, Vol. 212, No 9, pp. 1856-1861, ISSN 0924-0136
() Research published in the top international journalTerek P., Kovačević L., Miletić A., Panjan P., Baloš S., Škorić B., Kakaš D.: Effects of die core treatments and surface finishes on the sticking and galling tendency of Al–Si alloy casting during ejection, Wear, 2016, Vol. 356, pp. 122-134, ISSN 0043-1648
() Research published in the top international journalTerek P., Kovačević L., Miletić A., Kukuruzović D., Baloš S., Škorić B.: Improved ejection test for evaluation of soldering tendency of cast alloy to die core materials, Journal of Materials Processing Technology, 2019, Vol. 266, pp. 114-124, ISSN 0924-0136
() Research published in the prominent international journalKakaš D., Kovačević L., Terek P., Krumes D., Kolumbić Z.: Use of SEM and EDS analysis in the investigation of Al-Si-Cu piston alloy cast porosity, Metalurgija, 2009, Vol. 48, No 3, pp. 171-174, ISSN 0543-5846, UDK: 669+621.7+51/54(05)=163.42=111
() Research published in the prominent international journalKovačević L., Terek P., Miletić A., Kakaš D.: Dependence of interfacial heat transfer coefficient on casting surface temperature during solidification of Al–Si alloy castings cast in CO2 sand mold, Heat and Mass Transfer, 2014, Vol. 50, No 8, pp. 1115-1124, ISSN 0947-7411
() Research published in the prominent international journalKakaš D., Terek P., Miletić A., Kovačević L., Vilotić M., Škorić B.: Friction and wear of low temperature deposited TiN coating sliding in dry conditions at various speeds, Tehnicki vjesnik - Technical Gazette, 2013, Vol. 20, No 1, pp. 27-33, ISSN 1330-3651
() Research published in the prominent international journalKovačević L., Terek P., Miletić A., Kukuruzović D., Škorić B., Panjan P.: Industrial evaluation of duplex PVD hard coatings for HPDC, Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2018, Vol. 40, No 5, pp. 271-271, ISSN 1678-5878
() Research published in the international journalMiletić A., Terek P., Kovačević L., Vilotić M., Kakaš D., Škorić B., Kukuruzović D.: Influence of substrate roughness on adhesion of TiN coatings, Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2014, Vol. 36, No 2, pp. 293-299, ISSN 1678-5878
() Research published in the international journalInfluence of interfacial layer thickness and substrate roughness on adhesion of TiN coatings deposited at low temperatures by IBAD, Kakas, D., Terek, P., Kovacevic, L. , Miletic, A., Skoric, B. , Surface Review and Letters Volume 18, Issue 3-4, June 2011, Pages 83-90
() Research published in the journal of the international importance verified by the special resolutionTerek P., Kovačević L., Miletić A., Kukuruzović D., Škorić B., Drnovšek A., Panjan P.: Ejection performance of coated core pins intended for application on high pressure die casting tools for aluminium alloys processing, Tribology in Industry, 2017, Vol. 39, No 3, pp. 334-339, ISSN 0354-8996
() Research published in the journal of the international importance verified by the special resolutionKakaš D., Škorić B., Terek P., Miletić A., Kovačević L., Vilotić M.: Mechanical Properties of TiN Coatings Deposited at Different Temperatures by IBAD Process, FME Transactions, 2012, Vol. 40, No 1, pp. 37-42, ISSN 1451-2092
() Report from the international meeting printed in its entiretyKovačević L., Terek P., Miletić A., Kukuruzović D., Škorić B.: Influence of computational grid density on results of casting simulation, 13. International Scientific Conference "Flexible Technologies" - MMA, Novi Sad: Faculty of Technical Sciences, Department of Production Engineering, 28-29 Septembar, 2018, pp. 245-248, ISBN 978-86-6022-094-5
() Report from the international meeting printed in its entiretyKukuruzović D., Terek P., Kovačević L., Škorić B., Baloš S., Panjan P., Čekada M., Miletić A.: Estimation of soldering tendency of Al-alloy toward CrAlN as a candidate coating for HPDC tools, 13. International Scientific Conference "Flexible Technologies" - MMA, Novi Sad: Faculty of Technical Sciences, Department of Production Engineering, 28-29 Septembar, 2018, pp. 249-252, ISBN 978-86-6022-094-5
() Report from the international meeting printed in its entiretyMiletić A., Panjan P., Čekada M., Terek P., Kovačević L., Škorić B.: Mechanical and tribological properties of industrially prepared TiAlN hard ceramic coatings, 13. International Scientific Conference "Flexible Technologies" - MMA, Novi Sad: Faculty of Technical Sciences, Department of Production Engineering, 28-29 Septembar, 2018, pp. 253-256, ISBN 978-86-6022-094-5
() Report from the international meeting printed in its entiretyTerek P., Kovačević L., Miletić A., Kukuruzović D., Škorić B., Drnovšek A., Panjan P.: Cast alloy soldering tendency and corrosion resistance of duplex PVD coatings for application on die casting tools for aluminum alloys processing, 60. Annual Technical Conference - SVC TechCon, Providence: Society of vacuum coaters, 29-4 April, 2017, pp. 1-6
() Report from the international meeting printed in its entiretyTerek P., Kovačević L., Miletić A., Kukuruzović D., Škorić B., Drnovšek A., Panjan P.: Ejection performance of coated core pins intended for application on die casting tools for aluminium alloys procesing, 15. International Conference on Tribology - SERBIATRIB, Kragujevac: Serbian Tribology Society, University of Kragujevac, Faculty of Engineering, 17-19 Maj, 2017, pp. 382-387, ISBN 978-86-6335-041-0
() Report from the international meeting printed in its entiretyŠkorić B., Miletić A., Terek P., Kovačević L., Kukuruzović D.: Nano modification of hard coatings with ions, 4. International Scientific Conference on Advances in Mechanical Engineering - ISCAME, Debrecen: Department of Mechanical Engineering, Faculty of Engineering, University of Debrecen, Working Commission in Mechanical Engineering Specialized Committee in Engineering Regional Committee in Debrecen, Hungarian Academy of Sciences Hungary, 13-15 Oktobar, 2016, pp. 485-490, ISBN 978-963-473-917-3
() Report from the international meeting printed in its entiretyŠkorić B., Miletić A., Terek P., Kovačević L., Kukuruzović D.: Nano modification of hard coatings with ions, 6. International Conference on Innovative Trends in Science, Engineering and Management - ICITSEM, Dubai, 1-2 Decembar, 2016, pp. 54-58, ISBN 978-963-473-917-3
() Report from the international meeting printed in its entiretyTerek P., Kovačević L., Miletić A., Kukuruzović D., Škorić B., Kakaš D.: Improvement of Ejection Test Used for Evaluation of Soldering Tendency Between Casting and Die Materials, 2. Metallurgical and Materials Engineering Congress of South-East Europe - MME SEE, Beograd: Assicoation of Metallurgical Engineers Serbia, 3-5 Jun, 2015, pp. 239-245, ISBN 978-86-87183-27-8
() Report from the international meeting printed in its entiretyTerek P., Kukuruzović D., Miletić A., Panjan P., Kovačević L., Škorić B.: Surface Roughness and Its Effect on Tribological Performance of Magnetron Sputtered Nitride Coatings, 14. International Conference on Tribology - SERBIATRIB, Beograd: Serbian Tribology Society, Faculty of Mechanical Engineering in Belgrade, 13-15 Maj, 2015, pp. 143-148, ISBN 978-86-7083-857-4
() Report from the international meeting printed in its entiretyKovačević L., Terek P., Miletić A., Kukuruzović D., Kakaš D.: Application of casting simulations in optimization of gating system with vertical runner extension, 12. International Scientific Conference "Flexible Technologies" - MMA, Andrevlje: University of Novi Sad, Faculty of technical sciences, 25-26 Septembar, 2015, ISBN 978-86-7892-722-5
() Report from the international meeting printed in its entiretyŠkorić B., Miletić A., Kukuruzović D., Terek P.: Modication of Hard Coatings with Ion Beam, 4. International Congress on Natural Science and Engineering (ICNSE), Kyoto: Higher Education Forum (HEF), Taipei, Taiwan, 7-9 Maj, 2015, pp. 265-272, ISBN 978-986-87417-8-2
() Report from the international meeting printed in its entiretyMiletić A., Terek P., Panjan P., Kovačević L., Kukuruzović D., Škorić B.: Mechanical and tribological properties of nanolayered TiAlN/TiSiN coating, 14. International Conference on Tribology - SERBIATRIB, Beograd: Serbian Tribology Society, Faculty of Mechanical Engineering in Belgrade, 13-15 Maj, 2015, pp. 137-142, ISBN 978-86-7083-857-4
() Report from the international meeting printed in its entiretyKovačević L., Terek P., Kakaš D., Miletić A., Kukuruzović D.: Determination of Metal-Mold Heat Transfer Coefficient During CO2 Sand Casting, 1. Metallurgical and Materials Engineering Congress of South-East Europe - MME SEE, Beograd: Association of metallurgical engineers of Serbia, 23-25 Maj, 2013, pp. 312-318, ISBN 978-86-87183-24-7
() Report from the international meeting printed in its entiretyTerek P., Kovačević L., Miletić A., Kakaš D., Škorić B., Kukuruzović D.: Adhesion of Low Temperature Tin Coating Governed by Interfacial Layer Thickness and Surface Roughness, 1. Metallurgical and Materials Engineering Congress of South-East Europe - MME SEE, Beograd: Association of metallurgical engineers of Serbia, 23-25 Maj, 2013, pp. 154-160, ISBN 978-86-87183-24-7
() Report from the international meeting printed in its entiretyKovačević L., Terek P., Kakaš D., Miletić A., Kukuruzović D.: Determination of Metal-Mold Heat Transfer Coefficient During CO2 Sand Casting, 1. Metallurgical and Materials Engineering Congress of South-East Europe - MME SEE, Beograd: Association of metallurgical engineers of Serbia, 23-25 Maj, 2013, pp. 312-318, ISBN 978-86-87183-24-7
() Report from the international meeting printed in its entiretyTerek P., Kovačević L., Miletić A., Kakaš D., Škorić B., Kukuruzović D.: Adhesion of Low Temperature Tin Coating Governed by Interfacial Layer Thickness and Surface Roughness, 1. Metallurgical and Materials Engineering Congress of South-East Europe - MME SEE, Beograd: Association of metallurgical engineers of Serbia, 23-25 Maj, 2013, pp. 154-160, ISBN 978-86-87183-24-7
() Report from the international meeting printed in its entiretyKukuruzović D., Berić J., Kakaš D., Škorić B., Terek P., Kovačević L., Miletić A., Vilotić M.: Application of a new device for measuring hard coatings thickness uniformity applied on large sized too, 11. International Scientific Conference "Advanced Production Technologies" - MMA, Novi Sad: Faculty of technical sciences, 20-21 Septembar, 2012, pp. 137-140, ISBN 978-86-7892-429-3
() Report from the international meeting printed in its entiretyKukuruzović D., Blagojević D., Kakaš D., Škorić B., Kovačević L., Terek P., Miletić A., Vilotić M.: The effects of cutting parameters and tool wear on the roughness of machined surface, 11. International Scientific Conference "Advanced Production Technologies" - MMA, Novi Sad: Faculty of technical sciences, 20-21 Septembar, 2012, pp. 141-144, ISBN 978-86-7892-429-3
() Report from the international meeting printed in its entiretyVilotić M., Kakaš D., Terek P., Kovačević L., Kukuruzović D., Miletić A.: Severe Plastic Deformation by Compression, 11. International Scientific Conference "Advanced Production Technologies" - MMA, Novi Sad: Faculty of technical sciences, 20-21 Septembar, 2012, pp. 497-500, ISBN 978-86-7892-429-3
() Report from the international meeting printed in its entiretyKakaš D., Škorić B., Terek P., Kovačević L., Vilotić M., Miletić A.: Influence of sliding speed and surface roughness on the friction coefficient and wear TiN coatings deposited at low temperature, 12. International Conference on Tribology - SERBIATRIB, Kragujevac: Mašinski fakultet Kragujevac, 11-13 Maj, 2011, pp. 131-137, ISBN 978-86-86663-74-0
() Report from the international meeting printed in its entiretyVilotić M., Kakaš D., Terek P., Kovačević L., Miletić A.: Neutral radius value determination by numerical simulation method at ring upsetting test, 12. International Conference on Tribology - SERBIATRIB, Kragujevac: Mašinski fakultet Kragujevac, 11-13 Maj, 2011, pp. 300-305, ISBN 978-86-86663-74-0
() Report from the international meeting printed in its entiretyKakaš D., Škorić B., Miletić A., Terek P., Kovačević L., Vilotić M.: Influence of substrate roughness on adhesion strength of hard TiN films , 34. International Conference on Production Engineering, Niš: Univerzitet u Nišu, Mašinski fakultet u Nišu Aleksandra Medvedeva br 14 18000 Niš Srbija, 28-30 Septembar, 2011, pp. 79-82, ISBN 978 – 86 – 6055 – 01
() Report from the international meeting printed in its entiretyKakaš D., Škorić B., Terek P., Miletić A., Kovačević L., Vilotić M.: Mechanical properties of TiN coatings deposited at different temperatures by IBAD, 34. International Conference on Production Engineering, Niš: Univerzitet u Nišu, Mašinski fakultet u Nišu Aleksandra Medvedeva br 14 18000 Niš Srbija, 28-30 Septembar, 2011, pp. 83-86, ISBN 978 – 86 – 6055 – 01
() Report from the international meeting printed in its entiretyVilotić M., Kakaš D., Miletić A., Kovačević L., Terek P.: Influence of friction coefficient on workpiece roughness in ring upsetting process, 34. International Conference on Production Engineering, Niš: Univerzitet u Nišu, Mašinski fakultet u Nišu Aleksandra Medvedeva br 14 18000 Niš Srbija, 28-30 Septembar, 2011, pp. 527-530, ISBN 978 – 86 – 6055 – 01
() Report from the international meeting printed in its entiretyKakaš D., Škorić B., Terek P., Miletić A., Kovačević L., Vilotić M.: Influence of dry sliding conditions and coating roughness on the wear of titanium nitride coatings deposited at low temperature, 7. International Conference on Tribology - BALKANTRIB, Thessaloniki: Laboratory for Machine Tools and Manufacturing Engineering (EE??) of the Aristoteles University of Thessaloniki and of the Fraunhofer Project Center Coatings in Manufacturing (PCCM), 3-5 Oktobar, 2011, pp. 49-57, ISBN 987-960-98780-6-7
() Report from the international meeting printed in its entiretyKakaš D., Škorić B., Miletić A., Terek P., Kovačević L., Vilotić M.: Influence of substrate roughness on adhesion of TiN films prepared by ion beam assisted deposition, 9. International Conference in Manufacturing Engineering - THE "A" Coatings, Thessaloniki: Laboratory for Machine Tools and Manufacturing Engineering (EE??) of the Aristoteles University of Thessaloniki and of the Fraunhofer Project Center Coatings in Manufacturing (PCCM), 3-5 Oktobar, 2011, pp. 295-302, ISBN 978-960-98780-5-0
() Report from the international meeting printed in its entiretyIvanišević A., Kačmarčik I., Terek P., Štrbac B.: NUMERICAL SIMULATION OF UPSETTING OF CYLINDER BY CONICAL DIE WITH EXPERIMENTAL TEST, 1. International Conference on Innovative Technologies IN-TECH, Prague, 14-16 Septembar, 2010, pp. 352-355, ISBN 978-80-904508-2-6
() Report from the international meeting printed in its entiretyKakaš D., Škorić B., Babić M., Mitrović S., Miletić A., Vilotić M., Terek P., Kovačević L.: Surface roughness and friction coefficient at IBAD deposited TiN hard coating, 11. International Conference on Tribology - SERBIATRIB, Beograd: Serbian Tribology Society, 13-15 Maj, 2009, pp. 145-148, ISBN 978-86-7083-659-4
() Report from the international meeting printed in its entiretyKakaš D., Škorić B., Miletić A., Vilotić M., Terek P., Kovačević L.: Investigation of micro and nano tribological phenomenon by EDX, 11. International Conference on Tribology - SERBIATRIB, Beograd: Serbian Tribology Society, 13-15 Maj, 2009, pp. 159-163, ISBN 978-86-7083-659-4
() Report from the international meeting printed in its entiretyKakaš D., Kovačević L., Terek P.: Improvement of casting process control by computer simulation and experimental observation , 3. International Conference on Manufacturing Engineering - ICMEN, Chalkidiki: Aristoteles University of Thessaloniki and of the Fraunhofer Project Center Coatings in Manufacturing (PCCM), 1-3 Oktobar, 2008, pp. 273-279, ISBN 978-960-243-649-3
() Report from the international meeting printed in extractsKakaš D., Kovačević L., Terek P., Krumes D., Kolumbić Z.: Use of SEM and EDS analysis in the investigation of Al-Si-Cu piston alloy cast porosity, Metalurgija, 2008, pp. 247-247, ISSN 0543-5846, 8. International Symposium of Croatian Metallurgical Society - SHMD, Šibenik: Croatian Metallurgical Society (CMS), 22-26 Jun, 2008, pp. 247-247, ISBN 0543-5846
() Report from the international meeting printed in extractsMiletić A., Škorić B., Panjan P., Čekada M., Kovačević L., Terek P.: Microstructure of nanocomposite TiSiN and nanolayered TiSiN/TiAlN coatings, 36. Microscopy Conference - MC, Regensburg: German Society for Electron Microscopy, 25-30 Avgust, 2013, pp. 613-614
() Report from the international meeting printed in extractsMiletić A., Škorić B., Panjan P., Kovačević L., Terek P., Vilotić M., Kukuruzović D.: Characterization of nanostructured TiAlN/TiSiN coatings, 10. Students’ Meeting, Processing and Application of Ceramics, Novi Sad, 6-9 Novembar, 2013, ISBN 978-86-6253-028-8
() Research published in the leading journal of the national importanceŠkorić B., Miletić A., Terek P., Kovačević L., Kukuruzović D.: Nano modification of hard coatings with ions, International Journal of Science and Research, 2016, Vol. 2, No 4, pp. 1-5, ISSN 2412-4389
() Research published in the leading journal of the national importanceVilotić M., Kakaš D., Šiđanin (Sidjanin) L., Alexandrov S., Jeng Yeau R., Terek P.: Severe Plastic Deformation by Multistage Compression, Journal for Technology of Plasticity, 2013, Vol. 38, No 1, pp. 33-40, ISSN 0354-3870, UDK: 621.7
() Research published in the leading journal of the national importanceVilotić M., Kakaš D., Terek P., Kovačević L., Miletić A.: Neutral Radius Value Determination by Numerical Simulation Method at Ring Upsetting Test, Tribology in industry - International Journal of Yugoslav Tribology Society, 2011, Vol. 33, No 3, pp. 122-127, ISSN 0354-8996
() Research published in the leading journal of the national importanceKakaš D., Kovačević L., Terek P.: Mold filling improvement by computer simulation and parameter variation, Annals of Faculty Engineering Hunedoara - International Journal of Engineering, 2009, Vol. 7, No 1, pp. 83-88, ISSN 1584-2665
() Research published in the leading journal of the national importanceKakaš D., Kovačević L., Terek P.: Computer simulation and experimental research of cast piston porosity , Annals of Faculty Engineering Hunedoara - International Journal of Engineering, 2007, Vol. 5, No 2, pp. 179-184, ISSN 1584-2665
() Research published in the leading journal of the national importanceVilotić M., Kakaš D., Šiđanin (Sidjanin) L., Alexandrov S., Jeng Yeau R., Terek P.: Severe Plastic Deformation by Multistage Compression, Journal for Technology of Plasticity, 2013, Vol. 38, No 1, pp. 33-40, ISSN 0354-3870, UDK: 621.7
() Research published in the journal of the national importanceKakaš D., Škorić B., Babić M., Mitrović S., Miletić A., Vilotić M., Terek P., Kovačević L.: Surface roughness and friction coefficient in IBAD deposited TiN hard coating, FME Transactions, 2009, Vol. 37, No 2, pp. 83-86, ISSN 1451-2092, UDK: 621
() Research published in the journal of the national importanceKakaš D., Škorić B., Mitrović S., Babić M., Terek P., Miletić A., Vilotić M.: Influence of Load and Sliding Speed on Friction Coefficient of IBAD Deposited TiN, Tribology in industry, 2009, Vol. 31, pp. 3-10
() Research published in the scientific journalVilotić M., Kakaš D., Miletić A., Kovačević L., Terek P.: Influence of friction coefficient on workpiece roughness in ring upsetting process, Journal of Production Engineering, 2012, Vol. 15, No 1, pp. 49-52, ISSN 1821-4932, UDK: 621
() Invited lectures from the meeting of the national importance printed in its entiretyKakaš D., Škorić B., Vilotić M., Terek P., Miletić A., Kovačević L.: Nanomodifikacije površina – unapređenje karakteristika materijala, 1. Savetovanje: Napredni materijali i mogućnosti njihove primene, Požarevac: Narodna tehnika Požarevac, Društvo hemičara, tehnologa i metalurga Požarevac, Veljka Dugoševića 14 Požarevac, 21 Decembar, 2011, pp. 30-39, ISBN 978-86-911159-2-0
() Invited lectures from the meeting of the national importance printed in its entiretyKakaš D., Škorić B., Miletić A., Terek P., Kovačević L., Vilotić M.: Razvoj nanokompozitnih prevlaka visoke tvrdoće, 1. Savetovanje "Kompozitni materijali i mogućnosti njihove primene", Požarevac: Narodna Tehnika Požarevac, 27 Avgust, 2010, pp. 88-99, ISBN 978-86-912123-3-9
() Report from the meeting of the national importance printed in its entiretyKakaš D., Škorić B., Vilotić M., Terek P., Miletić A., Kovačević L.: Measuring nano-tribological processes at TiN hard coating, 9. Međunarodna konferencija o dostignućima elektrotehnike, mašinstva i informatike - DEMI, Banja Luka: Mašinski fakultet Banjaluka, 28-29 Maj, 2009, pp. 235-240, ISBN 978-99938-39-23-1
() Report from the meeting of the national importance printed in its entiretyKakaš D., Kovačević L., Terek P.: Primena računarskih simulacija za poboljšanje tehnologije kokilnog livenja aluminijumskih legura, 32. Savetovanje proizvodnog mašinstva Srbije sa međunarodnim učešćem, Novi Sad: Fakultet Tehničkih Nauka, Novi Sad, 18-20 Septembar, 2008, pp. 245-248, ISBN 978-86-7892-131-5
() Report from the meeting of the national importance printed in extractsKakaš D., Kovačević L., Terek P.: CAST POROSITY INVESTIGATION BY ELECTRON MICROSCOPY , 4. Serbian Congress for Microscopy - SCM, Beograd: Srpsko društvo za mikroskopiju, 11-12 Oktobar, 2010, pp. 47-48, ISBN 978-86-7306-104-7
() Report from the meeting of the national importance printed in extractsKakaš D., Škorić B., Terek P., Kovačević L., Miletić A., Vilotić M.: MICRO/NANO-TRIBOLOGICAL PHENOMENON INVESTIGATION BY AFM AND SEM, 4. Serbian Congress for Microscopy - SCM, Beograd: Srpsko društvo za mikroskopiju, 11-12 Oktobar, 2010, pp. 49-50, ISBN 978-86-7306-104-7
TitleScientific areaHigher education institutionElection date
Assistant ProfessorLivenje, termička obrada, inženjerstvo površina i nanotehnologijeFaculty of Technical Sciences01.04.2017.
Assistant - MasterLivenje, termička obrada, inženjerstvo površina i nanotehnologijeFaculty of Technical Sciences01.01.2016.
Research AssociateSurface Engineering, Micro and Nano Technologies25.05.2014.
Research AssociateSurface Engineering, Micro and Nano TechnologiesFaculty of Technical Sciences10.06.2011.
Professional Studies ProfessorCasting and Thermal Processing Technology and Surface Engineering, Micro and NanoFaculty of Technical Sciences10.04.2008.