() Research published in the top international journal
Savković B., Kovač P., Dudić B., Gregus M., Rodić D., Štrbac B., Dučić N.: Comparative Characteristics of Ductile Iron and Austempered Ductile Iron Modeled by Neural Network , Materials, 2019, Vol. 12, No. 18, pp. 1-16, ISSN 1996-1944
() Research published in the top international journal
Kovač P., Gostimirović M., Rodić D., Savković B.: Using the temperature method for the prediction of tool life in sustainable production, Measurement, 2019, Vol. 133, pp. 320-327, ISSN 0263-2241
() Research published in the top international journal
Štrbac B., Ačko B., Havrlišan S., Matin I., Savković B., Hadžistević M.: Investigation of the Effect of Temperature and Other Significant Factors on Systematic Error and Measurement Uncertainty in CMM Measurements by Applying Design of Experiments, Measurement, 2020, Vol. 158, ISSN 0263-2241
() Research published in the prominent international journal
Savković B., Kovač P., Rodić D., Štrbac B., Klancnik S.: Comparison of artificial neural network, fuzzy logic and genetic algorithm for cutting temperature and surface roughness prediction during the face milling process, Advances in Production Engineering and Management, 2020, Vol. 15, No. 2, pp. 137-150, ISSN 1854-6250
() Research published in the prominent international journal
Savković B., Kovač P., Dudić B., Rodić D., Tarić M., Gregus M.: Application of an Adaptive “Neuro-Fuzzy” Inference System in Modeling Cutting Temperature during Hard Turning, Applied Sciences, 2019, Vol. 9, No. 18, pp. 1-13, ISSN 2076-3417
() Research published in the prominent international journal
Savković B., Kovač P., Dudić B., Gregus M.: Decoding of Factorial Experimental Design Models Implemented in Production Process, Computers Materials and Continua / CMC, 2022, Vol. 71, No. 1, pp. 1-15, ISSN 1546-2218
() Research published in the prominent international journal
Kovač P., Petrović V., Pucovski (Pucovsky) V., Birčanin B., Savković B., Gostimirović M.: ENERGY EFFICIENCY CART MODELING OF SOLAR ENERGY COLLECTORS BY GENETIC PROGRAMMING, Thermal Science, 2016, Vol. 20, No S2, pp. 471-479, ISSN 0354-9836
() Research published in the prominent international journal
Rodić D., Gostimirović M., Sekulić M., Savković B., Štrbac B.: Investigation an assisting electrode powder mixed electrical discharge machining of nonconductive ceramic, International Journal of Advanced Manufacturing Technology, 2021, ISSN 0268-3768
() Research published in the prominent international journal
Kovač P., Rodić D., Pucovski (Pucovsky) V., Savković B., Gostimirović M.: Multi-output fuzzy inference system for modeling cutting temperature and tool life in face milling, Journal of Mechanical Science and Technology, 2014, Vol. 28, No 10, pp. 4247-4256, ISSN 1738-494X, UDK: DOI 10.1007/s12206-014-0938-0
() Research published in the prominent international journal
Kovač P., Rodić D., Pucovski (Pucovsky) V., Savković B., Gostimirović M.: Application of Fuzzy Logic and Regression Analysis for Modeling Surface Roughness in Face Milliing, Journal of Intelligent Manufacturing, 2013, Vol. 24, No 4, pp. 755-762, ISSN 0956-5515, UDK: DOI 10.1007/s10845-012-0623-z
() Research published in the prominent international journal
Kovač P., Šiđanin (Sidjanin) L., Rajnović D., Savković B., Wannasin J.: The microstructure influence on the chip formation process of Al-Cu alloy cast conventionally and in semi solid state, Metalurgija, 2012, Vol. 51, No 1, pp. 34-38, ISSN 0543-5846, UDK: 669.715:621.96.621.773:620.18=111
() Research published in the prominent international journal
Gostimirović M., Kovač P., Ješić D., Škorić B., Savković B.: Surface layer properties of the workpiece material in high performance grinding, Metalurgija, 2012, Vol. 51, No 1, pp. 105-108, ISSN 0543-5846, UDK: 621.7:621.923:621.795:536.5=111
() Research published in the international journal
Savković B., Kovač P., Stoić A., Dudić B.: Optimization of Machining Parameters Using the Taguchi and ANOVA Analysis in the Face Milling of Aluminum Alloys AL7075, Tehnički vjesnik - Technical Gazette, 2020, Vol. 27, No. 4, pp. 1221-1228, ISSN 1330-3651
() Research published in the international journal
Simic S., Golubović D., Savković B., Kovač P., Ješić D.: MONITORING OF WOOD BRIQUETTES COMBUSTION PARAMETERS DEPENDING ON SHARE WASTE MATERIALS OBTAINED FROM REFINING PROCESS OF BASE OILS AND PARAFFIN, Oxidation Communication, 2016, Vol. 39, No 4, pp. 3291-3304, ISSN 0209-4541
() Research published in the international journal
Kovač P., Pucovski (Pucovsky) V., Gostimirović M., Savković B., Rodić D.: INFLUENCE OF DATA QUANTITY ON ACCURACY OF PREDICTIONS IN MODELING TOOL LIFE BY THE USE OF GENETIC ALGORITHMS, International Journal of Industrial Engineering: Theory, Applications and Practice, 2014, Vol. 21, No 2, pp. 14-21, ISSN 1943-670X
() Research published in the international journal
Golubovic D., Kovač P., Savković B., Jesic D., Gostimirović M.: Testing the tribological characteristics of nodular cast iron austempered by a conventional and an isothermal procedure, Materiali in Tehnologije, 2014, Vol. 48, No 2, pp. 293-298, ISSN 1580-2949, UDK: 669.131.6:531.43:620.178.1
() Research published in the international journal
Kovač P., Ješić D., Sovilj-Nikić S., Kandeva M., Kalitchin Z., Gostimirović M., Savković B.: ENERGY ASPECTS OF TRIBOLOGICAL BEHAVIOUR OF NODULAR CAST IRON, Journal of Environmental Protection and Ecology, 2018, Vol. 19, No 1, pp. 163-172, ISSN 1311-5065
() Research published in the journal of the international importance verified by the special resolution
Kovač P., Rodić D., Savković B., Pucovski (Pucovsky) V., Gostimirović M.: Modelling Tool Wear in Avoiding the Risk of Breakage by Using Fuzzy Logic, Integritet i vek konstrukcija, 2015, Vol. 15, No 2, pp. 103-109, ISSN 1451-3749, UDK: 621
() Invited lectures from the international meeting printed in its entirety
Kovač P., Pucovski (Pucovsky) V., Gostimirović M., Savković B., Šoos Lj., Ješić D.: Cutting force during grinding determined by regression analysis and genetic algorithms, 8. International Congress on Precision Machining - ICPM, Novi Sad: Faculty of Technical Sciences, University of Novi Sad, 1-3 Oktobar, 2015, pp. 13-18, ISBN 978-86-7892-742-3
() Report from the international meeting printed in its entirety
Kovač P., Ješić D., Savković B., Gostimirović M., Gvozdenović N.: Research of tribological characteristics of various oil applied in the tribological system, 15. International Conference on Tribology - SERBIATRIB, Kragujevac: University of Kragujevac, Faculty of Engineering and Serbian Tribology Society, 17-19 Maj, 2017, pp. 481-486, ISBN 978-86-6335-041-0
() Report from the international meeting printed in its entirety
Savković B., Kovač P., Liska K., Mankova I., Sekulić M.: Modelling of surface roughness using the DoE plans of the first order and artificial neural networks in face milling, 9. International Scientific Conference on Mechanical Engineering - COMEC, Las Villas: Faculty of Mechanical Engineering, Universidad Central “Marta Abreu” de Las Villas, CUBA, 14-17 Novembar, 2016, pp. 1-14, ISBN 978-959-312-216-0
() Chapter in the M41 or research in the thematic collection of the national importance
Kovač P., Savković B., Kulundžić N., Gostimirović M., Holešovsky F., Sekulić M.: Development In Machining Technology, Scientific Research Reports, Edited by : Wojciech Zebela and Ildiko Mankova, Simulation of Temperature Distribution on the 3D Moving Cutting Tool, Cracow, Cracow University of Technology, 2015, str. 20-26, ISBN 978-83-7242-844-8
() Research published in the leading journal of the national importance
Kovač P., Ješić D., Kirin S., Savković B.: Zagađenje voda uzrokovano uljima која роtiču od sredstava za čišćenje i odmašćivanje, Savremena poljoprivredna tehnika, 2015, Vol. 41, No 1, pp. 17-24, ISSN 0350-2953
() Research published in the leading journal of the national importance
Kovač P., Savković B., Ješić D., Mankova I.: Ispitivanje visokootpornih prevlaka na mašinskim delovima na abrazivno habanje, Savremena poljoprivredna tehnika, 2015, Vol. 41, No 2, pp. 95-102, ISSN 0350-2953, UDK: 621.78
() Research published in the journal of the national importance
Kovač P., Rodić D., Gostimirović M., Savković B., Ješić D.: ADAPTIVE NEURO-FUZZY MODELING OF THERMAL VOLTAGE PARAMETERS FOR TOOL LIFE ASSESSMENT IN FACE MILLING, Journal of Production Engineering, 2017, Vol. 20, No 1, pp. 16-20, ISSN 1821-4932, UDK: 621
() Research published in the journal of the national importance
Savković B., Tarić M., Kovač P., Nedić B., Pucovski (Pucovsky) V., Risteiu M.: MODELING OF CUTTING TEMPERATURE IN TURNING OF HARDENED STEEL, Journal of Production Engineering, 2016, Vol. 19, No 2, pp. 7-12, ISSN 1821-4932, UDK: 621
() Research published in the scientific journal
Savković B., Kovač P., Mankova I., Gostimirović M., Rokosz K., Rodić D.: Surface roughness modeling of semi solid aluminum milling by fuzzy logic, Journal of Advances in Technology and Engineering Research, 2017, Vol. 3, No 2, pp. 44-56, ISSN 2414-4592, UDK: DOI:10.20474/jater-3.2.2
() Report from the meeting of the national importance printed in its entirety
Kovač P., Savković B., Gostimirović M., Ješić D.: ADOPTION OF SPECIFIC BORONISING TECHNOLOGY OF STEEL WORKPIECE AND EXEMINATION OF BORID LAYER WEAR, 7. Međunarodni naučni skup Savremeni materijali, Banja Luka: Academy of Sciences and Arts of the Republic of Srpska, 21-22 Decembar, 2014, pp. 73-82, ISBN 978-99938-21-65-6
() Defended Doctoral dissertation
Savković B.: Modeliranje funkcija obradivosti pri procesu obrade glodanjem, doktorska disertacija, Novi Sad, Fakultet tehničkih nauka, Univerzitet u Novom Sada, 2015, str. 1-214
() Prototype, new methods, software, standardized and certified instrument
Kovač P., Gostimirović M., Sekulić M., Savković B.: Programsko i tehničko rešenje virtualne instrumentacije za merenje otpora rezanja pri čeonom glodanju, 2010
() Prototype, new methods, software, standardized and certified instrument
Kovač P., Ješić D., Gostimirović M., Savković B., Rodić D.: Uređaj za tribološko ispitivanje kliznih ležajeva od metalnih materijala, polimera i kompozita, 2015
() Basic textbook for the course
Kovač Pavel, Milikić Dragoje, Gostimirović Marin, Sekulić Milenko, Savković Borislav : Zbirka zadataka iz tehnologije obrade rezanjem, FTN, Novi Sad, 2011
