Asst. Prof. Magdolna Pal


Missing picture!

Magdolna Pal

Assistant Professor


Telephone021/485-2625
E-mail
Academic titleAssistant Professor
Employee's biography not found!
Assistant Professor
01.05.2015.
PositionFromToOrganizational unit
Assistant - Master29.09.2009.01.04.2015.Department of Graphic Engineering and Design
Teaching Associate01.11.2007.01.09.2009.Department of Graphic Engineering and Design
TitleIn institution
Procesne operacije izrade kutija

Bachelor's thesis

Graphic Engineering and Design

Faculty of Technical Sciences

2006

Razvoj modela objektivne kontrole površinskih oštećenja premaznih papira u procesu savijanja

PhD thesis

Graphic Engineering and Design

Faculty of Technical Sciences

2014

Criterium of productionDescription
() Monographic study/chapter in M11 or research in the thematic collection of the leading international importanceNovaković D., Kašiković N., Vladić G., Pál (Apro) M.: Printing on Polymers, chapter Screen Printing, Amsterdam, Elsevier Inc., 2015, str. 247-262, ISBN 9780323374682
() Research published in the top international journalPál (Apro) M., Novaković D., Dedijer S., Koltai L., Jurič (Rilovski) I., Vladić G., Kašiković N.: Image processing based quality control of coated paper folding, Measurement, 2017, Vol. 100, pp. 99-109, ISSN 0263-2241, UDK: http://dx.doi.org/10.1016/j.measurement.2016.12.033
() Research published in the prominent international journalPál (Apro) M., Novaković D., Pál S., Dedijer S., Milić N.: Colour Space Selection for Entropy-based Image Segmentation of Folded Substrate Images, Acta Polytechnica Hungarica, Journal of Applied Sciences, 2013, Vol. 10, No 1, pp. 43-62, ISSN 1785-8860
() Research published in the international journalPavlović Ž., Dedijer S., Kašiković N., Novaković D., Pál (Apro) M., Risović D.: Evaluation of effective models of offset CtP plate aluminum oxide surface roughness characterization, International Journal of Surface Science and Engineering, 2017, Vol. 11, No 4, ISSN 1749-7868
() Research published in the international journalDedijer S., Pál (Apro) M., Boeva R., Spiridonov I., Bozhkova T., Zorić V., Zeljković Ž.: Characterization of flexo and letterpress printing plate’s surface roughness by indirect SEM image-based profilometry, Bulgarian Chemical Communications, 2017, Vol. 49, No L, pp. 148-157, ISSN 0324-1130
() Research published in the international journalBozhkova T., Boeva R., Spiridonov I., Sapkota J., Nedelchev Y., Kašiković N., Dedijer S., Pál (Apro) M.: Improvement of physical-mechanical and optical properties of the packaging production through coating with aqueous polymer dispersions in accordance with the environmental protection requirements, Bulgarian Chemical Communications, 2017, Vol. 49, No L, pp. 169-173, ISSN 0324-1130
() Research published in the international journalPavlović Ž., Pál (Apro) M., Cigula T., Rumyana B., Boeva R., Spiridonov I., Bozhkova T., Prica M.: Comparative study of offset plate tone value reproduction using different measuring and image processing tools, Bulgarian Chemical Communications, 2017, Vol. 49, No L, pp. 222-228, ISSN 0324-1130
() Research published in the international journalBanjanin B., Vladić G., Pál (Apro) M., Baloš S., Dramićanin M., Rackov M., Knežević I.: Consistency analysis of mechanical properties of elements produced by FDM additive manufacturing technology, Revista Materia, 2018, Vol. 23, No 4, ISSN 1517-7076
() Report from the international meeting printed in its entiretyPál (Apro) M., Koltai L., Dedijer S., Draganov S., Đokić M.: Instrumental investigation of fold-crack resistance of coated papers, 7. INTERNATIONAL Symposium on Graphic Engineering and Design GRID, Novi Sad: Faculty of Technical Sciences, Department of Graphic Engineering and Design, 13-14 Novembar, 2014, pp. 183-190, ISBN 978-86-7892-645-7
() Report from the international meeting printed in its entiretyPál (Apro) M., Novaković D., Pal S.: Evaluation of image segmentation algorithms for folded substrate analysis, 38. IARIGAI, Budimpešta: International Association of Research Organizations for the Information, Media and Graphic Arts Industries, 11-14 Septembar, 2011, pp. 209-217, ISBN 978-3-9812704-2-6
() Report from the international meeting printed in its entiretyKašiković N., Vladić G., Pál (Apro) M., Jurič (Rilovski) I., Milić N., Milošević R., Petrović S.: Rubbing fastness of textile printed with screen printing transfer technique, 11. Innovations in Publishing, Printing and Multimedia Technologies, Kaunas: Kaunas university of applied sciences, 19-20 April, 2018, pp. 67-73
() Report from the international meeting printed in its entiretyPál (Apro) M., Dedijer S., Kašiković N., Vladić G., Novaković D., Pavlović Ž., Banjanin B.: Investigation of adhesive layer thickness distribution of perfect bounded broshures, 11. Innovations in Publishing, Printing and Multimedia Technologies, Kaunas: Kaunas University of Applied Sciences, 19-20 April, 2018, pp. 90-96
() Report from the international meeting printed in its entiretyDedijer S., Jurič (Rilovski) I., Tomić I., Pál (Apro) M., Milić N., Kašiković N., Vladić G.: Preliminary study of print mottle analysis in flexography using GLCM method, 11. Innovations in Publishing, Printing and Multimedia Technologies, Kaunas: Kaunas University of Applied Sciences, 19-20 April, 2018, pp. 33-39, ISBN 2029-4638
() Report from the international meeting printed in its entiretyDedijer S., Tomić I., Pál (Apro) M., Jurič (Rilovski) I., Pavlović Ž., Milić N.: Repeatability and reproduction accuracy in electrophotography for color difference evaluations, 9. INTERNATIONAL Symposium on Graphic Engineering and Design GRID, Novi Sad: Faculty of Technical Sciences, 8-10 Novembar, 2018, pp. 313-321, ISBN 978-86-6022-115-7
() Report from the international meeting printed in its entiretyPál (Apro) M., Dedijer S., Pavlović Ž., Banjanin B., Vasić J.: Statistical analysis of adhesive layer thickness` distribution on perfect bounded brochures, 9. INTERNATIONAL Symposium on Graphic Engineering and Design GRID, Novi Sad: Faculty of Technical Sciences, 8-10 Novembar, 2018, pp. 197-203, ISBN 978-86-6022-115-7
() Report from the international meeting printed in its entiretyBanjanin B., Vladić G., Pál (Apro) M., Dimovski V., Adamović (Majkić) S., Delić G.: Production factors influencing mechanical and physical properties of FDM printed embossing dies, 9. INTERNATIONAL Symposium on Graphic Engineering and Design GRID, Novi Sad: University of Novi Sad, Faculty of technical sciences, Department of graphic engineering and design, 8-10 Novembar, 2018, pp. 225-236, ISBN 978-86-6022-115-7
() Report from the international meeting printed in its entiretyTomić I., Dedijer S., Jurič (Rilovski) I., Pál (Apro) M., Pavlović Ž., Vladić G.: Influence of Resolution and Print Settings on Colour Reproduction in Ink-Jet Printing, 2. 2nd International Printing Technologies Symposium – PrintIstanbul 2017, Istanbul: Marmara University, 11-12 Oktobar, 2017, pp. 273-282, ISBN 978-9944-0636-7-8
() Report from the international meeting printed in its entiretyPál (Apro) M., Dedijer S., Tomić I., Jurič (Rilovski) I., Zorić V.: Influence of sample-size variations on the in-plane tensile strength of uncoated paper, 8. International Symposium on Graphic Engineering and Design, GRID, Novi Sad: University of Novi Sad, Faculty of Technical Sciences, Department of Graphic Engineering and Design, 3-4 Novembar, 2016, pp. 109-114, ISBN 978-86-78928-67-3
() Report from the international meeting printed in its entiretyŽarko J., Novaković D., Vladić G., Pál (Apro) M., Dedijer S.: Embossing Tools Production Using FDM 3D Printing Technology, 5. International Joint Conference on Environmental and Light Industry Technologies, Budimpešta: Obuda University, 19-20 Novembar, 2015, pp. 1-10, ISBN 978-615-5460-60-9
() Report from the international meeting printed in its entiretyDedijer S., Pál (Apro) M., Pavlović Ž., Vladić G., Novaković D.: Possibilites of Flexo Printing Plate Elements Characterisation by Image Processing, 5. International Joint Conference on Environmental and Light Industry Technologies, Budimpešta: Obuda University, 19-20 Novembar, 2015, pp. 82-91, ISBN 978-615-5460-60-9
() Report from the international meeting printed in its entiretyTomić I., Dedijer S., Jurič (Rilovski) I., Pál (Apro) M.: The Effect of Scanning Resolution and Displacement Value on the GLCM-Based Features for Paper Texture Characterization, 8. International Symposium on Graphic Engineering and Design, GRID, Novi Sad: University of Novi Sad, Faculty of Technical Sciences, Department of Graphic Engineering and Design, 3-4 Novembar, 2016, pp. 263-271, ISBN 978-86-78928-67-3
() Report from the international meeting printed in its entiretyDedijer S., Tomić I., Pál (Apro) M., Pavlović Ž., Jurič (Rilovski) I.: Color Reproduction Quality in Multi-Pass Ink Jet Printing, 8. International Symposium on Graphic Engineering and Design, GRID, Novi Sad: University of Novi Sad, Faculty of Technical Sciences, Department of Graphic Engineering and Design, 3-4 Novembar, 2016, pp. 225-230, ISBN 978-86-78928-67-3
() Report from the international meeting printed in its entiretyKašiković N., Pál (Apro) M., Milošević R., Milić N., Jurišić B.: INFLUENCE OF TEXTILE WASHING TREATMENT ON READABILITY OF QR CODES, 7. INTERNATIONAL Symposium on Graphic Engineering and Design GRID, Novi Sad: FACULTY OF TECHNICAL SCIENCES, DEPARTMENT OF GRAPHIC ENGINEERING AND DESIGN, 13-14 Novembar, 2014, pp. 119-125, ISBN 978-86-7892-645-7
() Report from the international meeting printed in its entiretyDedijer S., Pál (Apro) M.: COMPARATIVE STUDY OF LINE AND DOT ELEMENTS REPRODUCTION ON FLEXO PRINTING PLATES USING DIFFERENT FILM MAKING TECHNOLOGIES, 7. INTERNATIONAL Symposium on Graphic Engineering and Design GRID, Novi Sad: Faculty of Technical Sciences, Department of Graphic Engineering and Design, 13-14 Novembar, 2014, pp. 77-85, ISBN 978-86-7892-645-7
() Report from the international meeting printed in its entiretyDedijer S., Pál (Apro) M., Pavlović Ž., Novaković D.: Surface roughness analysis of conventional flexo printing plate in dependence of developing and light finishing phase, 1. Wood, Pulp & Paper, Polygrafia Academica 2014, Bratislava: Slovak University of Technology, Faculty of Chemical and Food Technology, 12-13 Mart, 2014, pp. 101-106, ISBN 978-80-89597-16-1
() Report from the international meeting printed in its entiretyDedijer S., Pavlović Ž., Pál (Apro) M., Novaković D.: Comparative analysis of tone value reproduction using different film making technologies, 8. Sigt - 7th Symposium of Information and Graphic Arts Technology, Ljubljana: of Natural Sciences and Engineering, Department of Textiles, Chair of Information and Graphic Art Technology, 5-6 Jun, 2014, pp. 76-80, ISBN 978-961-6900-09-6
() Report from the international meeting printed in its entiretyDedijer S., Pál (Apro) M., Pavlović Ž., Novaković D.: Čitljivost 2D bar kodova štampanih na različitim papirnim podlogama, 10. Conference of Chemists, Technologists and Environmentalists of Republic of Srpska, Banja Luka: Univerzitet u Banjoj Luci, Tehnološki fakultet, 15-16 Novembar, 2013, pp. 501-512, ISBN 978-99938-54-50-0
() Report from the international meeting printed in its entiretyPál (Apro) M., Novaković D., Pavlović Ž., Dedijer S.: Influence of the scanning resolution on image segmentation accuracy for an objective fold cracking evaluation, 11. Seminar in Graphic Arts, Pardubice: University of Pardubice, Department of Graphic Arts and Photophysics, 17-18 Jun, 2013, pp. 138-143
() Report from the international meeting printed in its entiretyPavlović Ž., Dedijer S., Pál (Apro) M., Cigula T.: Influence of the pad printing plate‘ printing element depth on the quality of the printed product, 11. Seminar in Graphic Arts, Pardubice: University of Pardubice, Department of Graphic Arts and Photophysics, 2013, 17-18 Jun, 2013, pp. 151-156, ISBN 978-80-7395-459
() Report from the international meeting printed in its entiretyPál (Apro) M., Dedijer S., Pavlović Ž., Đerić A.: Analiza lepljenih spojeva transportnih kutija od talasastih lepenki, 18. Međunarodni simpozijum iz oblasti celuloze, papira, ambalaže i grafike, Zlatibor: Tehnološko-metalurški fakultet Univerziteta u Beogradu, Centar celulozno-papirne, ambalažne i grafičke industrije Srbije, 19-22 Jun, 2012, pp. 61-66, ISBN 978-86-7401-283-3
() Report from the international meeting printed in its entiretyDedijer S., Pavlović Ž., Pál (Apro) M., Samo V.: Analiza parametara kvalitata otiska rotacione ofset štampe u zavisnosti od tiraža, 18. Međunarodni simpozijum iz oblasti celuloze, papira, ambalaže i grafike, Zlatibor: Tehnološko - metalurški fakultet Univerziteta u Beogradu, 19-22 Jun, 2012, pp. 84-89, ISBN 978-86-7401-283-3
() Report from the international meeting printed in its entiretyMilić N., Dedijer S., Pál (Apro) M., Pavlović Ž.: The statistical analysis of processing conditions’ influence on the surface roughness of flexo printing plate , 6. International Symposium on Graphic Engineering and Design, GRID, Novi Sad, 15-16 Novembar, 2012, pp. 141-150, ISBN 987-86-7892-457-6
() Report from the international meeting printed in its entiretyPál (Apro) M., Koltai L., Novaković D., Dedijer S., Draganov S.: Characterisation of fold-crack resistance of coated papers by tensile and Mullen burst test, 6. International Symposium on Graphic Engineering and Design, GRID, Novi Sad: Fakultet Tehničkih Nauka, 15-16 Novembar, 2012, pp. 311-316, ISBN 978-86-7892-457-6
() Report from the international meeting printed in its entiretyPál (Apro) M., Sadžakov M., Pavlović Ž., Dedijer S.: Karakterizacija ofset štampe na recikliranim kartonima, 17. International Symposium in the Field of Pulp, Paper, Packaging and Graphics, Zlatibor: Tehnološko-metalurški fakultet Univerziteta u Beogradu, Centar celulozno-papirne, ambalažne i grafičke industrije Srbije, 21-24 Jun, 2010, pp. 177-180, ISBN 978-86-7401-267-3
() Report from the international meeting printed in its entiretyPavlović Ž., Pál (Apro) M., Dedijer S., Novaković D.: Opseg boja u rotacionoj heat-set ofset štampi u zavisnosti od sastava sredstva za vlaženje, 17. International Symposium in the Field of Pulp, Paper, Packaging and Graphics, Zlatibor: Tehnološko-metalurški fakultet Univerziteta u Beogradu, Centar celulozno-papirne, ambalažne i grafičke industrije Srbije, 21-24 Jun, 2010, pp. 181-184, ISBN 978-86-7401-267-3
() Report from the international meeting printed in its entiretyDedijer S., Pál (Apro) M., Pavlović Ž., Cigula T., Obrenović B.: Influence of ink solvent concentration on wetting of flexo printing plate and PE foil, 2. International Joint Conference on Environmental and Light Industry Technologies, Budimpešta: Rejtő Sándor Faculty of Light Industry and Environmental Engineering, 21-22 Novembar, 2011, pp. 143-150, ISBN 978-615-5018-23-7
() Report from the international meeting printed in its entiretyPinćjer I., Pál (Apro) M.: Analysis of halftone dots deformation in the process of packaging and exploatation of cardboard package, 6. Simpozijum o konstruisanju, oblikovanju i dizajnu – KOD, Palić: Fakultet tehničkih nauka, 29-30 Septembar, 2010, pp. 249-252, ISBN 978-86-7892-278-7
() Report from the international meeting printed in its entiretyDedijer S., Novaković D., Pavlović Ž., Pál (Apro) M.: Uticaj uslova merenja i obrade podataka na merne rezultate hrapavosti štampajućih elemenata flekso štamparske forme, 16. International Symposium in the Field of Pulp, Paper, Packaging and Graphics, Zlatibor: Tehnološko-metalurški fakultet Univerziteta u Beogradu, Centar celulozno-papirne, ambalažne i grafičke industrije Srbije, 15-18 Jun, 2010, pp. 133-140, ISBN 978-86-7401-267-3
() Report from the international meeting printed in its entiretyPál (Apro) M., Dedijer S., Pavlović Ž.: Profilometric analysis of foil laminated papers, 5. International Symposium on Graphic Engineering and Design, GRID, Novi Sad: Fakultet tehničkih nauka, 11-12 Novembar, 2010, pp. 77-82, ISBN 978-86-7892-294-7
() Report from the international meeting printed in its entiretyPál (Apro) M., Novaković D., Dedijer S., Pavlović Ž., Karlović I.: Micro-topography analysis of foil laminated papers, 1. International Joint Conference on Environment and Light Industry Technologies, Budimpešta: Rejtő Sándor Faculty of Light Industry and Environmental Engineering, 18-19 Novembar, 2010, pp. 173-180, ISBN 978-615-5018-08-4
() Report from the international meeting printed in its entiretyDedijer S., Pavlović Ž., Pál (Apro) M., Šušić N.: Surface roughness factors of flexo printed solid areas on aluminium foil and characterisation of UCA, 5. International Symposium on Graphic Engineering and Design, GRID, Novi Sad: Faculty of technical sciences, Graphic engineering and design, 11-12 Novembar, 2010, pp. 45-52, ISBN 978-86-7892-294-7
() Report from the international meeting printed in its entiretyKarlović I., Tomić I., Dedijer S., Pál (Apro) M., Novaković D.: The correlation of surface roughnes parameters of print enhancement foils and optical and colourimetric properties of offset prints, 1. International Joint Conference on Environment and Light Industry Technologies, Budimpešta: Rejto Sándor Faculty of Light Industry and Environmental Engineering, Óbuda University., 18-19 Novembar, 2010, pp. 181-188, ISBN 978-615-5018-08-4
() Report from the international meeting printed in its entiretyPavlović Ž., Cigula T., Novaković D., Pál (Apro) M.: Influence of printing process on printing plate`s surface characteristics , 1. International Joint Conference on Environment and Light Industry Technologies, Budimpešta: Rejtő Sándor Faculty of Light Industry Engineering, 18-19 Novembar, 2010, pp. 135-142, ISBN 978-615-5018-08-4
() Report from the international meeting printed in its entiretyPál (Apro) M., Novaković D., Pal S.: Objective fold qality evaulation , 13. "Blaž Baromić" International Conference on printing, design and graphic communications, Senj: University of Zagreb, Faculty of Graphic Arts, 30-2 Septembar, 2009, pp. 21-24, ISBN 978-953-7644-02-4
() Report from the international meeting printed in its entiretyPál (Apro) M., Novaković D., Pal S.: Investigation of optimal parameter set of the objective quality estimate of folded paper, 9. Seminar in Graphic Arts, Pardubice: University of Pardubice, 23-24 Septembar, 2009, pp. 99-104, ISBN 978-80-7395-200-6
() Report from the international meeting printed in its entiretyJovičić S., Pál (Apro) M.: The halftone structure of tin packaging sheets, 1. "Printig Future Days" international IARIGARI student conference on print and media technology, Chemnitz, 14-17 Novembar, 2005, pp. 191-196, ISBN 3-89700-100-4
() Report from the international meeting printed in extractsKašiković N., Vladić G., Stančić M., Jurič (Rilovski) I., Pál (Apro) M.: COLOURFASTNESS TO SERIAL WASHING PROCESS OF SCREEN PRINTS ON TEXTILE MATERIALS, 15. International Conference on Printing, Design and Graphic Communications - Blaž Baromić, Senj: Croatian Society of Graphic Artists, Croatia, 16-19 Septembar, 2015, pp. 23-23
() Report from the international meeting printed in extractsPál (Apro) M., Novaković D., Dedijer S., Pavlović Ž., Kašiković N.: Preliminary Analysis of Image Segmentation Algorithms for an Objective Fold Cracking Evaluation, 15. International Conference on Printing, Design and Graphic Communications - Blaž Baromić, Senj: Croatian Society of Graphic Artists, Croatia, 16-19 Septembar, 2015, pp. 34-34
() Report from the international meeting printed in extractsPál (Apro) M.: Objective fold-crack resistance assessment of coated papers, 1. COST Training School 'Printing of bio-based materials in packaging', Budimpešta: Óbuda University, Faculty of Light Industry and Enviromental Engineering Institute of Media Technology, 24-27 Septembar, 2013, pp. 201-201, ISBN 978-615-5018-87-9
() Report from the international meeting printed in extractsDedijer S., Novaković D., Gužvica M., Pavlović Ž., Pál (Apro) M.: Evaluation of Pad Printed Electro Conductive Elements, 10. Seminar in Graphic Arts, Pardubice: University of Pardubice, Department of Graphic Arts and Photophysics, 19-21 Septembar, 2011, pp. 157-157, ISBN 978-80-7395-420-8
() Report from the international meeting printed in extractsPál (Apro) M.: A bígelés paraméterei , 5. Vajdasági Magyar Tudományos Diákköri Konferencia (Studentska naučna konferencija vojvođanskih Mađara), Novi Sad: Vajdasági Magyar Felsőoktatási Kollégium, 17-19 Novembar, 2006, pp. 96-97, ISBN 86-85245-06-0
() Report from the international meeting printed in extractsJovičić S., Pál (Apro) M.: Változások a nyomtatott fémdobozok rácsszerkezetében , 4. Vajdasági Magyar Tudományos Diákköri Konferencia (Studentska naučna konferencija vojvođanskih Mađara), Subotica: Vajdasági Magyar Felsőoktatási Kollégium, 18-20 Novembar, 2005, pp. 113-114, ISBN 86-85245-04-4
() Report from the international meeting printed in extractsPál (Apro) M.: A műanyagok jelentősége a címkézési tehnológiákban , 3. Vajdasági Magyar Tudományos Diákköri Konferencia (Studentska naučna konferencija vojvođanskih Mađara), Senta: Vajdasági Magyar Felsőoktatási Kollégium, 19-21 Novembar, 2004, pp. 58-59, ISBN 86-85245-02-8
() Chapter in the M41 or research in the thematic collection of the national importancePál (Apro) M.: A műanyagok jelentősége a címkézési tehnológiákban, A tudomány pillérei, Válogatás a III Vajdasági Tudományos Diákköri Konferencia természettudományi és műszaki tárgyú dolgozataiból, (A tudomany pillerei - Zbornik radova sa III Studentske naučne konferencije vojvođanskih Mađara sa prirodno-naučnom i tehničkom tematikom), Novi Sad, Vajdasági Fesőoktatási Kollégium, 2005, str. 137-146, ISBN 86-85245-05-2
() Research published in the scientific journalArsić A., Novaković D., Pál (Apro) M.: Ispitivanje kvaliteta spojeva ambalažnih kartonskih kutija, Zbornik radova Fakulteta tehničkih nauka, 2016, Vol. 31, No 1, pp. 187-190, ISSN 0350-428X, UDK: 655
() Research published in the scientific journalŠandor M., Novaković D., Pál (Apro) M.: Istraživanje mogućnosti shimadzu EZ-LX uređaja i Trapezium X softvera u ispitivanju otpornosti papira na kidanje, Zbornik radova Fakulteta tehničkih nauka, 2016, Vol. 31, No 4, pp. 597-600, ISSN 0350-428X, UDK: 655
() Research published in the scientific journalPavlović Ž., Dedijer S., Pál (Apro) M., Tomić I., Jurič (Rilovski) I.: Readability of screen printed QR codes depending on their dimension, encoded content and type of printing substrate using screen printing technique , Glasnik hemičara, tehnologa i ekologa Republike Srpske, 2016, Vol. 12, No 1, pp. 37-45, ISSN 1840-054X, UDK: 54+66+502/504
() Research published in the scientific journalVladić G., Kecman M., Kašiković N., Pál (Apro) M., Stančić M.: Influence of the shape on the consumers perception of the packaging attributes, Journal of Graphic Engineering and Design, 2015, Vol. 6, No 2, pp. 27-32, ISSN 2217-379X, UDK: 655.3.066.25:159.937.522
() Research published in the scientific journalTuru E., Novaković D., Pál (Apro) M.: Uticaj parametara mašine Aristomat SL 1317 na kvalitet rezanja pri izradi prototipova ambalaže , Zbornik radova Fakulteta tehničkih nauka, 2015, Vol. 30, No 2, pp. 222-225, ISSN 0350-428X, UDK: 621.798.12
() Research published in the scientific journalKašiković N., Milošević R., Vladić G., Pál (Apro) M., Novaković D.: The Analysis of Parameters That Affect Print Quality of Screen Printed PVC Foils, Polytechnic and Design, 2015, Vol. 3, No 3, pp. 258-263, ISSN 1849-1995
() Research published in the scientific journalVukajlović A., Novaković D., Pál (Apro) M.: Parametarsko projektovanje složive ambalaže u programskom paketu Engview Synergy, Zbornik radova Fakulteta tehničkih nauka, 2015, Vol. 30, No 12, pp. 2357-2360, ISSN 0350-428X, UDK: 621.798.12
() Research published in the scientific journalSzalkai S., Novaković D., Pál (Apro) M.: Razvoj programske aplikacije učenja na daljinu o operacijama obrade savijanjem za mašinu Horizon AFC-546AKT, Zbornik radova Fakulteta tehničkih nauka, 2014, Vol. 29, No 10, pp. 2210-2213, ISSN 0350-428X, UDK: 655
() Research published in the scientific journalSilađi S., Novaković D., Pál (Apro) M.: Kvalitet povezivanja knjižnog bloka šivenog koncem, Zbornik radova Fakulteta tehničkih nauka, 2013, Vol. 28, No 7, pp. 1287-1290, ISSN 0350-428X, UDK: 655.3.066.25
() Research published in the scientific journalVučetić Ž., Novaković D., Pál (Apro) M.: Čitljivost bad kodova brzog odziva, Zbornik radova Fakulteta tehničkih nauka, 2013, Vol. 28, No 7, pp. 1310-1313, ISSN 0350-428X, UDK: 655.3
() Research published in the scientific journalDedijer S., Novaković D., Pál (Apro) M., Pavlović Ž.: Statistical analysis of printing elements reproduction on thermally developed CTP flexo printing plates , Journal of Graphic Engineering and Design, 2012, Vol. 3, No 2, pp. 12-22, ISSN 2217-379X, UDK: 655.2.225.3:519.2.248
() Research published in the scientific journalDedijer S., Novaković D., Gužvica M., Pavlović Ž., Pál (Apro) M.: Some properties of pad printed electro conductive elements, Scientific papers of the University of Pardubice, Faculty of Chemical Technology, Seria A, 2012, Vol. 17, No Seria A, pp. 241-255, ISSN 1211-5541
() Research published in the scientific journalPoša E., Novaković D., Pál (Apro) M.: Razvoj rešenja ambalaže za konkretan proizvod konditorske industrije, Zbornik radova Fakulteta tehničkih nauka, 2012, Vol. 27, No 4, pp. 769-799, ISSN 0350-428X, UDK: 655
() Research published in the scientific journalŽivković E., Novaković D., Pál (Apro) M.: Istraživanje procesa izrade i kontrole bešavnih brošura, Zbornik radova Fakulteta tehničkih nauka, 2012, Vol. 27, No 11, pp. 2203-2206, ISSN 0350-428X, UDK: 655.3.066.25
() Research published in the scientific journalSladojević J., Novaković D., Pál (Apro) M.: Ispitivanje čitljivosti dvodimenzionalnih bar kodova na ambalaži, Zbornik radova Fakulteta tehničkih nauka, 2012, Vol. 27, No 14, pp. 3071-3074, ISSN 0350-428X, UDK: 655.1
() Research published in the scientific journalDedijer S., Pál (Apro) M., Pavlović Ž., Cigula T., Obrenović B.: Flexographic ink composition and its wetting influence on flexo printing plate and printed substrate (PE FOIL), Papíripar, 2012, Vol. 56, No 4, pp. 24-30, ISSN 0031-1448
() Research published in the scientific journalPavlović Ž., Novaković D., Dedijer S., Pál (Apro) M.: Surface roughness of non-printing elements on CtP thermal offset plate after long print run, Machine Design, 2011, Vol. 3, No 4, pp. 281-284, ISSN 1821-1259
() Research published in the scientific journalĐerić A., Novaković D., Pál (Apro) M., Lazić V.: Ispitivanje lepljnenih spojeva talasastih lepenki kao ambalažnih materijala, Zbornik radova Fakulteta tehničkih nauka, 2011, Vol. 26, No 2, pp. 285-288, ISSN 0350-428X, UDK: 655.028
() Research published in the scientific journalKurcinak M., Novaković D., Pál (Apro) M.: Ispitivanje mehaničkih osobina biorazgradive ambalaže, Zbornik radova Fakulteta tehničkih nauka, 2011, Vol. 26, No 12, pp. 2963-2966, ISSN 0350-428X, UDK: 504
() Research published in the scientific journalOšap J., Novaković D., Pál (Apro) M.: Procesna kontrola kvaliteta štampe na formiranim ambalažnim limenkama za piće, Zbornik radova Fakulteta tehničkih nauka, 2011, Vol. 26, No 12, pp. 2971-2974, ISSN 0350-428X, UDK: 655.3
() Research published in the scientific journalŠulc V., Novaković D., Pál (Apro) M., Lazić V.: Istraživanje svojstava polimernih materijala za izradu ambalaže, Zbornik radova Fakulteta tehničkih nauka, 2010, Vol. 25, No 2, pp. 257-260, ISSN 0350-428X
() Research published in the scientific journalPavlović Ž., Novaković D., Dedijer S., Pál (Apro) M.: Changes in the surface roughness of aluminium oxide (non-printing) areas on offset printing plate depending on number of imprints, Journal of Graphic Engineering and Design, 2010, Vol. 1, No 1, pp. 32-38, ISSN 2217-379X, UDK: 655.3.022.3
() Research published in the scientific journalGajić J., Novaković D., Pál (Apro) M.: Istraživanje karakteristika poveza knjižnog bloka žicom, Zbornik radova Fakulteta tehničkih nauka, 2010, Vol. 25, No 4, pp. 749-752, ISSN 0350-428X
() Research published in the scientific journalLjuboljević K., Novaković D., Pál (Apro) M.: Specifičnosti projektovanja kartonske ambalaže u softveru EngView Package Designer, Zbornik radova Fakulteta tehničkih nauka, 2009, Vol. 24, No 7, pp. 2330-2333, ISSN 0350-428X
() Research published in the scientific journalMitrović D., Novaković D., Pál (Apro) M.: Istraživanje smanjenja opterećenja učenika težinom udžbenika, Zbornik radova Fakulteta tehničkih nauka, 2009, Vol. 24, No 7, pp. 2357-2360, ISSN 0350-428X
() Research published in the scientific journalPál (Apro) M., Pal S., Dedijer S.: Evaluation of single and multi-threshold entropy-based algorithms for folded substrate analysis, Journal of Graphic Engineering and Design, 2011, Vol. 2, No 2, pp. 1-9, ISSN 2217-379X, UDK: 655.004.932.2
() Report from the meeting of the national importance printed in its entiretyVladić G., Milić N., Kašiković N., Pál (Apro) M., Dedijer S.: UPOTREBA SAVREMENIH MULTIMEDIJALNIH ALATA ZA OBRAZOVANJE U OBLASTI HEMIJE, 11. Savjetovanje hemičara i tehnologija Republike Srpske, Teslić: University of Banjaluka, Faculty of Technology, 18-19 Novembar, 2016, pp. 562-567
() Report from the meeting of the national importance printed in its entiretyTomić I., Dedijer S., Pál (Apro) M., Vladić G., Pavlović Ž.: Procena razlike u opsegu boja u zavisnosti od načina mapiranja u ofset tehnici štampe , 11. Conference of Chemists, Technologists and Environmentalists of Republic of Srpska, Teslić: University of Banjaluka, Faculty of Technology, 18-19 Novembar, 2016, pp. 529-538, ISBN 978-99938-54-67-8
() Report from the meeting of the national importance printed in its entiretyPál (Apro) M.: Savremene etikete, 2. Naučno-stručni simpozijum Grafičko inženjerstvo i dizajn - GRID, Novi Sad: Fakultet tehničkih nauka, 1 Novembar, 2004, pp. 107-112
() Report from the meeting of the national importance printed in its entiretyVladić G., Kašiković N., Đurđević S., Avramović D., Pál (Apro) M.: TEHNIKE IZRADE INTERAKTIVNIH SIMULACIJA NAMENJENIH OBUCI OPERATERA GRAFIČKIH SISTEMA, 14. Tiskarstvo i Diyajn 2015, Zagreb: Tehničko veleučilište u Zagrebu, 27-28 Mart, 2015, pp. 83-87
() Report from the meeting of the national importance printed in its entiretyKašiković N., Pál (Apro) M., Vladić G., Novaković D., Milošević R.: ISPITIVANJE ČITLJIVOSTI QR KODOVA NA PAMUČNIM MATERIJALIMA ŠTAMPANIH TERMO TRANSFER TEHNIKOM, 4. Tendencije razvoja i inovativni pristup u tekstilnoj industriji Dizajn, Tehnologija, Menadžment, Beograd: Visoka tekstilna strukovna škola za dizajn, tehnologiju i menadžment, 6-7 Jun, 2014, pp. 131-136, ISBN 978-86-87017-30-6
() Report from the meeting of the national importance printed in its entiretyPál (Apro) M., Novaković D., Jasić I.: Istraživanje optimalnih radnih parametara savremenih sistema za savijanje, 4. Naučno - stručni simpozijum GRID, Novi Sad: Fakultet tehničkih nauka, 13-14 Novembar, 2008, pp. 209-216, ISBN 978-86-7892-145-2
() Report from the meeting of the national importance printed in its entiretyPál (Apro) M., Novaković D., Gerić K.: Uticaj formiranja žljeba na zateznu čvrstoću kartona, 3. Naučno - stručni simpozijum GRID, Novi Sad: Fakultet tehničkih nauka, 16-18 Novembar, 2006, pp. 95-100, ISBN 86-7892-009-2
() Report from the meeting of the national importance printed in extractsPál (Apro) M., Dedijer S., Kašiković N., Pavlović Ž., Vladić G.: Pregled računarski potpomognutih vizuelnih metoda za procenu otpornosti premaznih papira prema površinskom oštećenju, 14. Tiskarstvo i Diyajn 2015, Zagreb: Akademija Tehničkih Znanosti Hrvatske Centar za grafičko inženjerstvo, 27-28 Mart, 2015, pp. 24-24
() Report from the meeting of the national importance printed in extractsKašiković N., Vladić G., Pál (Apro) M., Novaković D., Đurđević S.: Uticajni parametri na kvalitet otiska dobijenog tehnikom sito štampe na PVC folije, 14. Tiskarstvo i Diyajn 2015, Zagreb: Akademija Tehničkih Znanosti Hrvatske Centar za grafičko inženjerstvo, 27-28 Mart, 2015, pp. 12-12
() Defended Doctoral dissertationPál (Apro) M.: Razvoj modela objektivne kontrole površinskih oštećenja premaznih papira u procesu savijanja, Novi Sad, Fakultet tehničkin nauka, Departman za grafičko inženjerstvo i dizajn, 2014
() Prototype, new methods, software, standardized and certified instrumentNovaković D., Pavlović Ž., Zeljković Ž., Nedeljković U., Dedijer S., Kašiković N., Vladić G., Pál (Apro) M., Avramović D., Pinćjer I., Milić N., Tomić I., Jurič (Rilovski) I., Đurđević S.: Softverski model za unapređenje znanja i proizvodnje u grafičkoj industriji, Tehničko rešenje, 2015
TitleScientific areaHigher education institutionElection date
Assistant ProfessorGrafičko inženjerstvoUniversity of Novi Sad01.05.2015.
Assistant - MasterGraphic Engineering and Design27.08.2012.
Assistant - MasterGraphic Engineering and DesignFaculty of Technical Sciences29.09.2009.
Teaching AssociateGraphic Engineering and DesignFaculty of Technical Sciences30.10.2007.