() Monographic study/chapter in M12 or research in the thematic collection of the international importance
Milija Kraišnik, Robert Čep, Karel Kouřil, Sebastian Baloš, Aco Antić, Mladomir Milutinović: Characterization of Microstructural Damage and Failure Mechanisms in C45E Structural Steel under Compressive Load. In: Esubalew Kasaw Gebeyehu, editor. Prime Archives in Material Science: 4th Edition. Hyderabad, India: Vide Leaf. 2022.
() Researches published in the journals of the international importance
Mladomir Milutinović, Robert Lendjel, Sebastian Baloš, Danka Labus Zlatanović, Luka Sevšek, Tomaž Pepelnjak: Characterisation of geometrical and physical properties of a stainless steel denture framework manufactured by single-point incremental forming. Journal of Materials Research and Technology. Volume 10 (2021), pp. 605-623. https://doi.org/10.1016/j.jmrt.2020.12.014
() Research published in the top international journal
Milutinović M., Baloš S., Plančak M., Movrin D.: Comparison of some mechanical properties and micro-topography of a component with non-axisymmetric geometry manufactured by cold orbital and hot forging. Journal of Materials Processing Technology, 249C (2017) pp. 179-192, http://dx.doi.org/10.1016/j.jmatprotec.2017.06.008.
() Research published in the top international journal
Pepelnjak T., Stojšić J., Sevšek L., Movrin D., Milutinović M.: Influence of Process Parameters on the Characteristics of Additively Manufactured Parts Made from Advanced Biopolymers, Polymers, 2023, Vol. 15, No. 3, ISSN 2073-4360
() Research published in the top international journal
Tomaž Pepelnjak, Luka Sevšek, Ognjan Lužanin, Mladomir Milutinović: Finite Element Simplifications and Simulation Reliability in Single Point Incremental Forming. Materials 2022, 15, 3707. https://doi.org/10.3390/ma15103707
() Research published in the prominent international journal
Brnic J., Brcic M., Baloš S., Vukelic G., Krscanski S., Milutinović M., Dramićanin M.: S235JRC+C Steel Response Analysis Subjected to Uniaxial Stress Tests in the Area of High Temperatures and Material Fatigue, Sustainability, 2021, Vol. 13, ISSN 2071-1050
() Research published in the prominent international journal
Movrin D., Milutinović M., Vilotić M., Alexandrov S., Lang L.: A Method for Determining the Workability Diagram by Varying Friction Conditions in the Upsetting of a Cylinder between Flat Dies, Crystals, 2021, Vol. 11, No. 11, pp. 1-10, ISSN 2073-4352
() Research published in the prominent international journal
Milutinović M., Movrin D., Pepelnjak T.: Theoretical and experimental investigation of cold hobbing processes in cases of cone-like punch manufacturing, International Journal of Advanced Manufacturing Technology, 2012, Vol. 58, No 9-12, pp. 895-9060, ISSN 0268-3768
() Research published in the prominent international journal
Vilotić D., Alexandrov S., Ivanisevic A., Milutinović M.: Reducibility of Stress-Based Workability Diagram to Strain-Based Workability Diagram. International Journal of Applied Mechanics, Vol. 8, No. 2 (2016), pp.1650022 1-10, DOI: 10.1142/S1758825116500228
() Research published in the prominent international journal
Ranđelović S., Madić M., Milutinović M., Tanikić D.: Methodological approach for the texture deformation analysis in the cold extrusion process. International Journal of Advanced Manufacturing Technology, Volume , 2017, pp.3593–3603, DOI 10.1007/s00170-017-0373-3, ISSN 0268-3768.
() Research published in the prominent international journal
Krajišnik M., Čep R., Kouršil k., Baloš S., Antić A., Milutinović M.: Characterization of Microstructural Damage and Failure Mechanisms in C45E Structural Steel under Compressive Load, Crystals, 2022, Vol. 12, No. 3, pp. 1-20, ISSN 2073-4352
() Research published in the international journal
Baloš S, Milutinović M., Potran M., Vuletić J., Puskar T. Pepelnjak T.: The Mechanical Properties of Moulded and Thermoformed Denture Resins. Strojniski vestnik - Journal of mechanical engineering Vol 61 (2), 2015, pp.138-145. DOI:10.5545/sv-jme.2014.2249
() Research published in the international journal
Milutinovic M., Hadzistevic M., Movrin D., Vrba I.: Non-conventional Methods for Shaping Plastics Parts. Revista de Materiale Plastice Vol.48 No.3, 2011, pp.222-226, ISSN 0025-5289.
() Research published in the international journal
Randjelović S., Manić M., Trajanović M., Milutinović M., Movrin D.: The impact of die angle on tool loading in the process of cold extruding steel. Materials and technology Vol. 46 (2012), No.2, pp.149–154.
() Research published in the international journal
Milutinović M., Vilotić, D., Pepelnjak T.: Part dimensional errors in free upsetting due to the elastic springback. Tehnicki vjesnik - Technical Gazette ISSN: 1330-3651, No.1(2014), pp. 135-140.
() Research published in the international journal
Pepelnjak T., Milutinović M., Plančak M., Vilotić D., Ranđelović S., Movrin D.: The Influence of Extrusion Ratio on Contact Stresses and Die Elastic Deformations in the Case of Cold Backward Extrusion, Strojniski vestnik - Journal of Mechanical Engineering, 2016, Vol. 62, No 1, pp. 41-50, ISSN 0039-2480
() Research published in the international journal
Skakun (Francuski) P., Lengyel R., Baloš S., Movrin D., Milutinović M.: Cold Radial Extrusion of a Gear-Like Element with Flow Relief Opening, Tehnicki vjesnik - Technical Gazette, 2018, Vol. 25, No 5, pp. 1363-1369, ISSN 1330-3651, UDK: 62(05)=163.42=111
() Research published in the journal of the international importance verified by the special resolution
Ranđelović S., Milutinović M., Blagojević V.: Deep drawing technology with wall ironing in mass packaging industry, Facta universitatis - series: Mechanical Engineering, 2017, Vol. 15, No 1, pp. 107-117, ISSN 0354–2025
() Invited lectures from the international meeting printed in its entirety
Milutinović M., Movrin D., Plančak M., Vilotić D.: Improvement of multi-stage hot forging process of yoke like part, 7. International Conference on Industrial Tools and Material Processing Technologies, Ljubljana: TECOS Slovenian Tool and Die development Centre - Celje, 4-7 Oktobar, 2009, pp. 73-80, ISBN 978-961-6692-01.4
() Report from the international meeting printed in its entirety
Vilotić D., Plančak M., Alexandrov S., Ivanišević A., Movrin D., Milutinović M.: Numerical simulation of upsetting of prismatic billets by v-shape dies with experimental verification , 34. International Conference on Production Engineering, Niš: University of Niš, Faculty of Mechanical Engineering, Department for Production IT and Management, 28-30 Septembar, 2011, pp. 301-304, ISBN 978-86-6055-019-6
() Report from the international meeting printed in its entirety
Ivanišević A., Milutinović M., Skakun (Francuski) P., Movrin D., Kačmarčik I., Plančak M., Vilotić D., Alexandrov S.: Experimental determination of forming limit diagram for brass, 11. International Scientific Conference "Flexible Technologies" - MMA, Novi Sad: Faculty of Technical Science, 20-21 Septembar, 2012, pp. 435-438, ISBN 978-86-7892-419-4
() Report from the international meeting printed in its entirety
Ranđelović S., Milutinović M., Nikolić S., Pepelnjak T., Movrin D.: Application of FEM for analysis of injection molding process and mold design, 8. International Conference on Innovative Technologies IN-TECH, Ljubljana, 11-13 Septembar, 2017, pp. 185-188, ISBN ISSN 0184-9069
() Report from the international meeting printed in its entirety
Movrin D., Vilotić D., Milutinović M.: Material formability at upsettings by conical and flat dies, 8. International Conference on Innovative Technologies IN-TECH, Ljubljana, 11-13 Septembar, 2017, pp. 141-144, ISBN ISSN 0184-9069
() Report from the international meeting printed in its entirety
Milutinović M., Vilotić D., Čupković Đ., Manojlović J.: Metal flow in the processes of manufacturing punches by cold indenting technology, 9th nternational Research/Expert Conference “Trends in the Development of Machinery and Associated Technology” TMT 2005, Antalya, Turkey, 26-30 September, 2005, pp.125-128.
() Report from the international meeting printed in its entirety
Plančak, M., Vilotić, D., Milutinović, M., Skakun, P.: Backward extrusion by shaped punch. Machine Tools, International Congress Automation And Robotics in Mechanical Engineering, pp. 40-46, Praha, 1996.
() Report from the international meeting printed in its entirety
Milutinović M., Plančak M., Vilotić D., Mandić V., Stefanović M.: Cold indenting of cone-like punch. Scientific Conference with international participation Manufacturing and management in 21st Century, Conference proceedings-chapter one, pp. 325-330, Ohrid, FYR Macedonia, 2004
() Report from the international meeting printed in its entirety
Milutinović M., Vilotić D., Pepelnjak T., Plančak M., Skakun P.: Influence of stress-strain state on dimensional accurency in multi-stage extrusion process of can-flanged part, 11th International Research/Expert Conference “Trends in the Development of Machinery and Associated Technology” TMT 2007, Hammamet, Tunisia, 05-09 September, 2007, pp.967-970.
() Report from the international meeting printed in extracts
Viloticć D., Plančak M., Trbojević I., Skakun P., Milutinović M., Čupkovic Đ.: Production line for bearing rings manufacturing, PSU-UNS International Conference on Engineering and Environment - ICEE-2005, Novi Sad, 2005
() Research published in the leading journal of the national importance
Milutinović M., Movrin D., Vilotić D., Plančak M., Jovičić R.: Influence of preform shape on die load and part accuracy in hot forging of pneumatic clamp., Journal for Technology of Plasticity, 2009, Vol. 34, No 1-2, pp. 107-119, ISSN 0354-3870, UDK: 621.7
() Research published in the leading journal of the national importance
Milutinović M., Movrin D., Skakun (Francuski) P., Pepelnjak T.: Tačnost delova kao funkcija elastičnih karakteristika noseće strukture mašine , Mašinstvo, časopis za mašinsko inženjerstvo, 2008, Vol. 12, No 1-2, pp. 3-14, ISSN 1512-5173
() Research published in the leading journal of the national importance
Plančak M., Vilotić D., Vujović V., Skakun P., Milutinović M.: Upper bound analysis of inverted extrusion. International Journal - Metallurgy and New Material Researches, Vol.VI, No.3/1998, pp. 24-34, 1998.
() Research published in the leading journal of the national importance
Milutinović M., Skakun (Francuski) P.: One innovative method for load reduction in cold extrusion of gear-like elements, Journal for Technology of Plasticity, 2015, Vol. 40, No 1, pp. 57-64, ISSN 0354-3870
() Research published in the leading journal of the national importance
M. Milutinović, Đ. Čupković, D. Vilotić, T. Pepelnjak, M. Plančak: Stress – strain state of combined backward – radial extrusion process of can – flanged part, Journal for technology of plasticity 2006, Novi Sad, Vol. 31, No.1-2, pp109-116.
() Research published in the leading journal of the national importance
Ranđelović S., Milutinović M., Nikolić S., Kačmarčik I.: Risk Assessment in Injection Molding Process, Journal for Technology of Plasticity, 2015, Vol. 40, No 2, pp. 23-34, ISSN 0354-3870, UDK: 621.7
() Research published in the leading journal of the national importance
Matin I., Hadžistević M., Vukelić Đ., Milutinović M., Golebski R.: Application of numerical simulation of injection molding of medical accessory, Journal for Technology of Plasticity, 2016, Vol. 41, No 1, pp. 47-55, ISSN 0354-3870
() Research published in the leading journal of the national importance
Lenđel R., Milutinović M., Ivanišević A., Vilotić D., Movrin D., Skakun (Francuski) P.: Single point incremental forming of large size componets, Journal for Technology of Plasticity, 2014, Vol. 39, No 1, pp. 59-68, ISSN 0354-3870
() Research published in the leading journal of the national importance
Milutinović M., Vilotić D., Movrin D.: PRECISION FORGING – TOOL CONCEPTS AND PROCESS DESIGN Naziv časopisa: Journal for Technology of Plasticity , Journal for Technology of Plasticity, 2008, Vol. 33, No 1-2, pp. 73-89, ISSN 0354-3870, UDK: 621.7
() Research published in the leading journal of the national importance
Milutinović M., Lenđel R., Potran M., Vilotić D., Skakun (Francuski) P., Plančak M.: Application of single point incremental forming for manufacturing of denture base, Journal for Technology of Plasticity, 2014, Vol. 39, No 2, pp. 15-24, ISSN 0354-3870
() Research published in the leading journal of the national importance
Milutinović M., Vilotić D., Plančak M., Trbojević I., Skakun P., čupković Đ., Lužanin O.: Hot ring rolling in bearing production, Journal for Technology of Plasticity, Vol. 30, No.1-2, pp 61-73, 2005
() Defended Magister thesis
Milutinović M.: Prilog istraživanju uticaja geometrije alata i geometrije pripremka na tečenje metala i parametre procesa kod hladnog utiskivanja. Magistarski rad, Novi Sad, 2001.
