Assoc. Prof. Igor Budak


Missing picture!

Igor Budak

Associate Professor


Telephone021/485-2255
E-mail
Academic titleAssociate Professor
Employee's biography not found!
Associate Professor
02.06.2015.
PositionFromToOrganizational unit
Assistant Professor03.06.2010.01.05.2015.Department of Production Engineering
Assistant with PhD17.12.2009.01.05.2010.Department of Production Engineering
Assistant - Magister21.02.2005.01.12.2009.Department of Production Engineering
TitleIn institution
Modeliranje i simulacija termo-procesnog sistema PROCON 38-002

Bachelor's thesis

Mechanical Engineering

Faculty of Technical Sciences

1998

Razvoj eksperimentalnog sistema za reverzibilno inženjersko projektovanje složenih površina

Magister thesis

Mechanical Engineering

Faculty of Technical Sciences

2004

Razvoj sistema za pre-procesiranje rezultata za 3D-digitalizacije kompleksnih površina

PhD thesis

Mechanical Engineering

Faculty of Mechanical Engineering

2009

Criterium of productionDescription
() Researches published in the journals of the international importanceMilanović B., Agarski B., Vukelić Đ., Budak I., Kiš (Kiss) F.: Comparative exergy-based life cycle assessment of conventional and hybrid base transmitter stations, Journal of Cleaner Production, 2017, Vol. 167, pp. 610-618, ISSN 0959-6526
() Researches published in the journals of the international importanceAgarski B., Budak I., Vukelić Đ., Hodolič J.: Fuzzy multi-criteria-based impact category weighting in life cycle assessment, Journal of Cleaner Production, 2016, Vol. 112, pp. 3256-3266, ISSN 0959-6526
() Researches published in the journals of the international importanceAgarski B., Nikolić V., Kamberović Ž., Anđić Z., Kosec B., Budak I.: Comparative life cycle assessment of Ni-based catalyst synthesis processes. DOI: 10.1016/j.jclepro.2017.06.012, Journal of Cleaner Production, 2017, ISSN 0959-6526
() Researches published in the journals of the international importanceTadić B., Todorović P., Novkinić B., Buchmeister B., Radenković M., Budak I., Vukelić Đ.: Fixture layout design based on a single-surface clamping with local deformation, International Journal of Simulation Modelling, 2015, Vol. 14, No 3, pp. 379-391, ISSN 1726-4529
() Researches published in the journals of the international importanceMaoduš N., Agarski B., Kočetov Mišulić T., Budak I., Radeka M.: Life cycle and energy performance assessment of three wall types in South-Eastern Europe region, Energy and Buildings, 2016, Vol. 113, pp. 605-614, ISSN 0378-7788
() Research published in the top international journalTadić B., Jeremić B., Todorović P., Vukelić Đ., Proso U., Mandić V., Budak I.: Efficient workpiece clamping by indenting cone-shaped elements, International Journal of Precision Engineering and Manufacturing, 2012, Vol. 13, No 10, pp. 1725-1735, ISSN 2234-7593
() Research published in the top international journalBudak I., Mirković S., Šokac M., Santoši Ž., Puškar T., Vukelić Đ.: An approach to modelling of personalized bone grafts based on advanced technologies, International Journal of Simulation Modelling, 2016, Vol. 15, No 4, pp. 637-648, ISSN 1726-4529
() Research published in the top international journalTadić B., Ranđelović S., Todorović P., Živković J., Kočović V., Budak I., Vukelić Đ.: Using a high-stiffness burnishing tool for increased dimensional and geometrical accuracies of openings, Precision Engineering: Journal of the International Societies for Precision Engineering and Nanotechnology, 2016, Vol. 43, pp. 335-344, ISSN 0141-6359
() Research published in the top international journalTadić B., Vukelić Đ., Miljanić D., Bogdanović B., Mačužić I., Budak I., Todorović P.: Model testing of fixture-workpiece interface compliance in dynamic conditions, Journal of Manufacturing Systems, 2014, Vol. 33, No 1, pp. 76-83, ISSN 0278-6125
() Research published in the top international journalBudak I., Vukelić Đ., Bračun D., Hodolič J., Soković M.: Pre-Processing of Point-Data from Contact and Optical 3D Digitization Sensors, Sensors, 2012, Vol. 12, No 1, pp. 1100-1126, ISSN 1424-8220
() Research published in the top international journalIlić Mićunović M., Budak I., Vučinić-Vasić M., Nagode A., Kozmidis-Luburić U., Hodolič J., Puškar T.: Size and shape particle analysis by applying image analysis and laser diffraction – Inhalable dust in a dental laboratory, Measurement, 2015, Vol. 66, No C, pp. 109-117, ISSN 0263-2241, UDK: 10.1016/j.measurement.2015.01.028
() Research published in the top international journalTrifković B., Budak I., Todorović A., Vukelić Đ., Lazić V., Puškar T.: Comparative analysis on measuring performances of dental intraoral and extraoral optical 3D digitization systems, Measurement, 2014, Vol. 47, No 1, pp. 45-53, ISSN 0263-2241
() Research published in the top international journalKosec G., Nagode A., Budak I., Antić A., Kosec B.: Failure of the pinion from the drive of a cement mill, Engineering Failure Analysis, 2011, Vol. 18, pp. 450-454, ISSN 1350-6307
() Research published in the prominent international journalBudak I., Trifkovic B., Puškar T., Vukelić Đ., Vučaj-Ćirilović V., Hodolič J., Todorović A.: Comparative analysis of 3D digitization systems in the field of dental prosthetics, Tehnicki vjesnik - Technical Gazette, 2013, Vol. 20, No 2, pp. 291-296, ISSN 1330-3651
() Research published in the prominent international journalVukelić Đ., Budak I., Tadić B., Šimunović G., Kljajić V., Agarski B.: Multi-Criteria Decision-Making and Life Cycle Assessment Model for Optimal Product Selection: Case Study of Knee Support, International Journal of Environmental Science and Technology, 2017, Vol. 14, No 2, pp. 353-364, ISSN 1735-1472
() Research published in the prominent international journalBudak I., Soković M., Barišić B.: Accuracy improvement of point data reduction with sampling-based methods by Fuzzy logic-based decision-making, MEASUREMENT, 2011, Vol. 44, No 6, pp. 1188-1200, ISSN 0263-2241
() Research published in the international journalBudak I., Soković M., Kopač J., Hodolič J.: Point Data Pre-Processing Based on Fuzzy Logic for Reverse Engineering Modelling, Strojniski vestnik = Journal of Mechanical Engineering, 2009, Vol. 55, No 12, pp. 755-765, ISSN 0039-2480
() Research published in the international journalAgarski B., Budak I., Kosec B., Hodolič J.: An Approach to Multi-criteria Environmental Evaluation with Multiple Weight Assignment, Environmental Modeling & Assessment, 2012, Vol. 17, No. 3, pp. 255-266, ISSN: 1420-2026.
() Research published in the international journalJevremović D., Puškar T., Budak I., Vukelić Đ., Kojić V., Eggbeer D., Williams R.: An RE/RM approach to the design and manufacture of removable partial dentures with a biocompatibility analysis of the F75 Co-Cr SLM alloy, Materijali in tehnologije, 2012, Vol. 46, No 2, pp. 123-129, ISSN 1580-2949
() Research published in the international journalTrifković B., Budak I., Todorović A., Hodolič J., Puškar T., Jevremović D., Vukelić Đ.: Application of Replica Technique and SEM in Accuracy Measurement of Ceramic Crowns, Measurement Science Review, 2012, Vol. 12, No 3, pp. 90-97, ISSN 1335-8871
() Research published in the international journalAgarski B., Kljajin M., Budak I., Tadić B., Vukelić Đ., Bosak M., Hodolič J.: Application of multi-criteria assessment in evaluation of motor vehicles’ environmental performances, Tehnički vjesnik/Technical Gazette, 2012, Vol. 19, No 2, pp. 221-226, ISSN 1330-3651
() Research published in the international journalVukelić Đ., Miljanić D., Ranđelović S., Budak I., Džunić D., Erić M., Pantić M.: Burnishing process based on optimal depth of workpiece penetration (Article in press, date of acceptance 28.08.2012, Manuscript Number: MIT-45-2012), Materijali in tehnologije, 2012, ISSN 1580-2949
() Research published in the international journalVukelić Đ., Tadić B., Miljanić D., Budak I., Todorović P., Ranđelović S., Jeremić B.: Novel workpiece clamping method for increased machining performance, Tehnički vjesnik-Technical Gazette, 2012, Vol. 19, No 4, pp. 837-846, ISSN 1330-3651.
() Research published in the international journalJevremović D., Puškar T., Kosec B., Vukelić Đ., Budak I., Aleksandrović S., Eggbeer D., Williams R.: The analysis of the mechanical properties of F75 Co-Cr alloy for use in selective laser melting (SLM) manufacturing of removable partial dentures (RPD), Metalurgija, 2012, Vol. 51, No 2, pp. 171-174, ISSN 0543-5846
() Research published in the international journalMirković S., Budak I., Puškar T., Tadić A., Šokac M., Santoši Ž., Đurđević Mirković T.: Application of modern Computer-Aided Technologies in the production of individual bone graft: A case report, Vojnosanitetski pregled, 2015, Vol. 72, No 12, pp. 1126-1131, ISSN 0042-8450
() Research published in the international journalVukelić Đ., Tadić B., Lužanin O., Budak I., Križan P., Hodolič J.: A rule-based system for fixture design, Scientific Research and Essays, 2011, Vol. 6, No 27, pp. 5787-5802, ISSN 1992-2248
() Research published in the international journalVještica S., Budak I., Kljajin M., Vukelić Đ., Milanović B., Milanković D., Hodolič J.: Model for analysis of environmental impacts of production processes in flooring industry based on LCA, Tehnicki vjesnik - Technical Gazette, 2014, Vol. 21, No 3, pp. 457-466, ISSN 1330-3651
() Research published in the international journalKovačević D., Soković M., Budak I., Antić A., Kosec B.: Optimal finite elements method (FEM) model for the jib structure of a waterway dredger, Metalurgija, 2012, Vol. 51, No 1, pp. 113-116, ISSN 0543-5846
() Research published in the international journalKosec B., Karpe B., Nagode A., Budak I., Ličen M., Đorđević M., Kosec G.: Efficiency and quality of inductive heating and quenching of planetary shafts, Metalurgija, 2012, Vol. 51, No 1, pp. 71-74, ISSN 0543-5846
() Research published in the international journalKovačević D., Budak I., Antić A., Kosec B.: Special finite elements: Theoretical background and application, Tehnički vjesnik/Technical Gazette, 2011, Vol. 18, No 4, pp. 649-655, ISSN 1330-3651
() Research published in the international journalSadilek M., Čep R., Budak I., Soković M.: Aspects of using tool axis inclination angle, Strojniski vestnik = Journal of Mechanical Engineering, 2011, Vol. 57, No 9, pp. 681-688, ISSN 0039-2480
() Research published in the international journalOstojić G., Tadić B., Lužanin O., Stankovski S., Vukelić Đ., Budak I., Miladinović Lj.: An integral system for automated cutting tool selection, Scientific Research and Essays, 2011, Vol. 6, No 15, pp. 3240-3251, ISSN 1992-2248
() Report from the international meeting printed in its entiretyBudak I., Vještica S., Milanović B., Milanković D., Vukelić Đ., Hodolič J., Martinov M.: LCA of an Industrial Plant after the Implementation of Waste-to-Energy, 3. ISWA Beacon Conference, Novi Sad: Faculty of Technical Sciences, 30-2 Novembar, 2011, pp. 136-144, ISBN 978-86-7892-361-6
() Report from the international meeting printed in its entiretyPuškar T., Budak I., Trifković B., Jevremović D.: Environmental and health protection in dental laboratories for fixed and mobile dentures, 9. International Conference "Environmental management", Bratislava, 10-11 Decembar, 2009, pp. 181-186, ISBN 978-80-89281-56-5
() Report from the international meeting printed in its entiretyBudak I., Kosec B., Hodolič J., Ilić M., Crnobrnja B., Soković M.: Contribution to the Analysis of Self-Declared Environmental Labels, 9. International Foundrymen Conference “Innovative materials and advanced concepts of metal casting production”, Opatija: University of Zagreb - Faculty of Metallurgy, 18-19 Jun, 2009, pp. 1-6, ISBN 978-953-7082-08-6
() Lexicographical unit in the scientific publication of the leading national importanceBudak I., Hodolič J., Bešić I., Vukelić Đ., Osanna H., Durakbasa N.: Koordinatne merne mašine i CAD inspekcija, Novi Sad, Fakultet tehničkih nauka, 2009, ISBN 978-86-7892-195-7
() Lexicographical unit in the scientific publication of the leading national importanceBudak I., Hodolič J., Hadžistević M., Vukelić Đ., Kosec B., Karpe B.: Označavanje proizvoda o zaštiti životne sredine, Novi Sad, Fakultet tehničkih nauka, 2009, ISBN 978-86-7892-190-2
() Lexicographical unit in the scientific publication of the leading national importanceHodolič J., Vukelić Đ., Budak I., Bešić I., Muransky J.: Ekodizajn i održivi razvoj u mašinskom inženjerstvu, Novi Sad, Fakultet tehničkih nauka, 2009, ISBN 978-86-7892-182-7
() Lexicographical unit in the scientific publication of the leading national importanceHodolič J., Hadžistević M., Budak I., Antić A., Sklenarova M., Majernik M., Chovancova J.: Upravljanje zaštitom životne sredine - Eko-menadžment, Novi Sad, Fakultet tehničkih nauka, 2009, str. 1-134, ISBN 978-86-7892-183-4
() Research published in the leading journal of the national importanceBudak I., Kosec B., Sokovic M.: Application of Contemporary Engineering Techniques and Technologies in the Field of Dental Prosthetics, Journal of Achievements in Materials and Manufacturing Engineering, 2012, Vol. 54, No 2, pp. 233-241, ISSN 1734-8412
() Research published in the leading journal of the national importanceIlić M., Budak I., Crnobrnja B., Hodolič J.: Analysis of seld-declared enviromentals labels, Materials and geoenvoroment, 2009, Vol. 56, No 1, pp. 74-87, ISSN 1408-7073
() Research published in the leading journal of the national importanceCrnobrnja B., Budak I., Ilić M., Hodolič J.: Environmental labelling of products with type I labels, Materials and geoenvoroment, 2009, Vol. 56, No 3, pp. 346-355, ISSN 1408-7073
TitleScientific areaHigher education institutionElection date
Associate ProfessorMetrology, Quality, Fixtures and Ecological-Engineering AspectsUniversity of Novi Sad02.06.2015.
Assistant ProfessorMetrology, Quality, Fixtures and Ecological-Engineering AspectsFaculty of Technical Sciences03.06.2010.
Assistant with PhDMetrology, Quality, Fixtures and Ecological-Engineering AspectsFaculty of Technical Sciences17.12.2009.
LecturerMetrology, Quality, Fixtures and Ecological-Engineering AspectsFaculty of Technical Sciences17.09.2009.
AssistantMetrology, Quality, Fixtures and Ecological-Engineering AspectsFaculty of Technical Sciences26.08.2009.
AssistantMetrology, Quality, Fixtures and Ecological-Engineering AspectsFaculty of Technical Sciences15.09.2004.
Intern AssistantMetrology, Quality, Fixtures and Ecological-Engineering AspectsFaculty of Technical Sciences01.01.1999.