Prof. Slobodan Tabaković


Missing picture!

Slobodan Tabaković

Full Professor


Telephone021/485-2315
E-mail
Academic titleFull Professor
Employee's biography not found!
Full Professor
24.10.2018.
PositionFromToOrganizational unit
Associate Professor24.10.2013.Chair of Computer Aided Technological Systems and Design
Professional Associate on Project09.10.2013.01.10.2013.Department of Production Engineering
Assistant Professor09.10.2008.01.09.2013.Department of Production Engineering
Assistant with PhD20.03.2008.01.09.2008.Department of Production Engineering
Assistant - Magister01.12.2004.01.03.2008.Department of Production Engineering
Labor Market19.02.2002.01.11.2004.Department of Production Engineering
TitleIn institution
Prilog projektovanju objektno orjentisanog prilaza za integraciju CAD i CAM/SAP programskih sistema

Bachelor's thesis

Mechanical Engineering

Faculty of Technical Sciences

1998

Mogućnost primene pojedinih tipova paralelnih mehanizama u gradnji mašina alatki i prilog razvoju programskog sistema za njihovo automatizovano projektovanje i izbor

Magister thesis

Mechanical Engineering

Faculty of Technical Sciences

2002

Razvoj programskog sistema za automatizovano projektovanje mašina alatki na bazi paralelnih mehanizama i optimalni izbor njihovih komponenti

PhD thesis

Mechanical Engineering

Faculty of Technical Sciences

2008

Criterium of productionDescription
() Research published in the top international journalBaloš S., Radisavljević I., Rajnović D., Dramićanin M., Tabaković S., Erić-Cekić O., Šiđanin (Sidjanin) L.: Geometry, mechanical and ballistic properties of ADI material perforated plates, Materials and Design, 2015, Vol. 83, pp. 66-74, ISSN 0261-3069
() Research published in the top international journalŽivković A., Zeljković M., Tabaković S., Milojević Z.: Mathematical modeling and experimental testing of high-speed spindle behavior, International Journal of Advanced Manufacturing Technology, 2014, Vol. 77, No 5-8, pp. 1071-1086, ISSN 0268-3768, UDK: DOI: 10.1007/s00170-014-6
() Research published in the prominent international journalTabaković S., Zeljković M., Milojević Z.: Automated Acquisition of Proximal Femur Morphological Characteristics, Measurement Science Review, 2014, Vol. 14, No 5, pp. 2850-293, ISSN 1335-8871, UDK: 10.2478/msr-2014-0039
() Research published in the international journalTabaković S., Grujić J., Zeljković M., Blagojević Z., Radojević B., Popović Z., Stanojević V.: Computer and experimental analysis of the stress state of the cement hip joint endoprosthesis body, Vojnosanitetski pregled, 2014, ISSN 0042-8450, UDK: prihvaćen za objavljivanje 10.01.2014.
() Research published in the international journalŽivković A., Zeljković M., Mlađenović C., Tabaković S., Milojević Z., Hadžistević M.: A study of thermal behavior of the machine tool spindle, Thermal Science, 2018, ISSN 0354-9836
() Research published in the journal of the international importance verified by the special resolutionTabaković S., Živković A., Grujić J., Zeljković M.: Using CAD/CAE software systems in the design process of modular, revision total hip endoprosthesis, Academic Journal of Manufacturing Engineering – AJME, 2011, Vol. 9, No 2/2011, pp. 97-102, ISSN 1583-7904
() Research published in the journal of the international importance verified by the special resolutionŽivković A., Zeljković M., Tabaković S.: Matematical Model for the Roller Bearing Life Determination, Academic Journal of Manufacturing Engineering – AJME, 2010, Vol. 8, No 3/2010, pp. 108-115, ISSN 1583-7904
() Research published in the journal of the international importance verified by the special resolutionTabaković S., Zeljković M., Gatalo R.: Analysis of Workspace of Machine Tools Based on Parallel Kinematics, Academic Journal of Manufacturing Engineering – AJME, 2010, pp. 88-96, ISSN 1583-7904
() Invited lectures from the international meeting printed in its entiretyMilojević Z., Navalušić S., Zeljković M., Tabaković S., Vićević M., Beju L.: Sculpting system based on dexel approach, 6. International Conference on Manufacturing Science and Education - MSE, Sibiu: "Lucian Blaga" University of Sibiu, Romania, Faculty of Engineering, 12-15 Jun, 2013, pp. 3-6, ISBN 1843-2522
() Report from the international meeting printed in its entiretyŽivković A., Zeljković M., Tabaković S.: Influence temperature on stiffness matrix for paired (duplex) angular contact ball bearings , 8. International Scientific Conference Research and development of mechanical elements and systems - IRMES, Trebinje: University of Monternegro, Faculty of Mechanical Engineering, 7-9 Septembar, 2017, pp. 189-194, ISBN 978-9940-527-53-2
() Report from the international meeting printed in its entiretyBojanić M., Tabaković S., Milojević Z., Zeljković M.: Processing of diagnostic images of the skeletal system, 11. International Scientific Conference "Advanced Production Technologies" - MMA, Novi Sad: Fakultet tehničkih nauka, 20-21 Septembar, 2012, pp. 215-218, ISBN 978-86-7892-419-4
() Report from the international meeting printed in its entiretyMlađenović C., Tabaković S., Zeljković M.: Design of 3-DOF machine tool based on hybrid mechanism, 7. International Triennial Conference "Heavy Machinery" - HM, Vrnjacka Banja: Faculty of Mechanical Engineering, 29-2 Jun, 2011, pp. 19-26, ISBN ISBN 978-86-82631-58
() Report from the international meeting printed in its entiretyTabaković S., Živković A., Grujić J., Zeljković M.: Design process of modular, revision total hip endoprosthesis, 5. International Conference on Manufacturing Science and Education - MSE, Sibiu: University of Sibiu, Romania, 2-5 Jun, 2011, pp. 395-398, ISBN 1843-2522
() Report from the international meeting printed in its entiretyTabaković S., Mlađenović C., Zeljković M., Gatalo R.: Analysis of kinematic characteristics of machine tools using a virtual model, 34. International Conference on Production Engineering, Niš: Faculty of Mechanical Engineering, 28-30 Septembar, 2011, pp. 113-116, ISBN 978-86-6055-019-6
() Report from the international meeting printed in its entiretyMlađenović C., Zeljković M., Tabaković S., Hadžistević M.: Application of laser measuring systems for testing the geometric accuracy of machine tools, 1. Regional Conference - Mechatronics in Practice and Education (MECH-CONF), Subotica: Subotica Tech, College of Applied Sciences, 8-10 Decembar, 2011, pp. 257-263, ISBN 978-86-85409-67-7, UDK: 077.5(082)
() Report from the international meeting printed in its entiretyŽivković A., Zeljković M., Tabaković S., Mlađenović C.: An improved model for determining the thermal preload of ball bearings with angular contact, 12. International Scientific Conference "Flexible Technologies" - MMA, Andrevlje, 25-26 Septembar, 2015, pp. 55-58, ISBN 978-86-7892-722-5
() Report from the international meeting printed in its entiretyTabaković S., Živanović S., Zeljković M.: The Application Of Virtual Prototype In Design Of A Hybrid Mechanism Based Machine Tools, 12. International Scientific Conference "Flexible Technologies" - MMA, Andrevlje: Faculty of technical sciences, 25-26 Septembar, 2015, pp. 62-66, ISBN 978-86-7892-722-5
() Report from the international meeting printed in its entiretyTabaković, S., Gatalo, R., Konjović, Z.: Object-Oriented Approach to Design Process Automation, The 2nd Regional Symposium “Young People and the Multidisciplinary Research”, Timisoara, Romania, 1999., pp. 462 – 468, ISBN 973-585-041-9
() Report from the international meeting printed in its entiretyTabaković, S.; Gatalo, R.; Zeljković, M.: Designing machine tools based on parallel kinematics using contemporary engineering and mathematical methods the 15th international DAAAM symposium, “Intelligent Manufacturing & Automation: Globalization – Technology – Men - Nature” 3 – 6th November 2004, Vienna, Austria, pp. 453-454, ISSN 1726-9679, ISBN 3-901509-42-9
() Prominent monograph of the national importanceZeljković M., Tabaković S., Milojević Z., Živković A., Navalušić S.: Savremeni prilazi u razvoju proizvoda specifične namene, Novi Sad, Univerzitet u Novom Sadu, Fakultet tehničkih nauka, Edicija tehničke nauke – monografije, 2016, ISBN 978-86-7892-854-3
() Prominent monograph of the national importanceZeljković M., Tabaković S., Antić A.: Programiranje numerički upravljanih obradnih sistema, Novi Sad, Fakultet tehničkih nauka-Novi Sad, 2013, str. 1-257, ISBN 978-86-7892-523-8
() Monographic bibliographic publicationZeljković M., Borojev Lj., Tabaković S., Antić A., Živković A.: Programiranje numerički upravljanih mašina alatki za obradu rezanjem, Fakultet tehničkih nauka, 2010, str. 1-197, ISBN 978-86-7892-329-6, UDK: 621.7/.9-52 (0.075.8)
() Research published in the leading journal of the national importanceMilojević Z., Tabaković S., Vićević M., Obradović M., Vranješ M., Milankov M.: THE TIBIAL APERTURE SURFACE ANALYSIS IN ANTERIOR CRUCIATE LIGAMENT RECONSTRUCTION PROCESS, Medicinski pregled, 2016, Vol. 69, No 3-4, pp. 99-105, ISSN 0025-8105, UDK: 61(497.1)
() Research published in the leading journal of the national importanceMilojević Z., Tabaković S., Zeljković M., Živković A.: Free form shape modelling by hand movement in virtual environment, Machine Design, 2016, Vol. 8, No 4, pp. 165-170, ISSN 1821-1259
() Research published in the leading journal of the national importanceŽivanović S., Tabaković S., Zeljković M., Milojević Z.: Configuring a machine tool based on hybrid O-X glide mechanism, Machine Design, 2016, Vol. 8, No 4, pp. 141-148, ISSN 1821-1259
() Research published in the leading journal of the national importanceŽivković A., Zeljković M., Tabaković S., Blanuša V.: The analysis of the static behavior of special roller bearings with forged outer ring, Journal for Technology of Plasticity, 2014, Vol. 39, No 1, pp. 39-48, ISSN 0354-3870, UDK: 621.7
() Research published in the leading journal of the national importanceGrujić J., Tabaković S., Zeljković M., Živković A., Vučinić Z., Đorđević A., Mandić N., Lujić N., Sekulić J.: Projektovanje specijalne endoproteze „Spacer“, Acta chirurgica Iugoslavica, 2013, pp. 109-115, ISSN 0354-950X, UDK: 616.72-089-77
() Research published in the leading journal of the national importanceBlanuša V., Zeljković M., Vilotić D., Tabaković S.: The specificity of punch presses programming, Journal for Technology of Plasticity, 2011, Vol. 36, No 2, pp. 121-135, ISSN 0354-3870
() Research published in the leading journal of the national importanceTabaković S.: CONFIGURING A MACHINE TOOL BASED ON HYBRID O-X GLIDE MECHANISM , Machine Design, 2016, Vol. 8, No 4, pp. 141-148, ISSN 1821-1259
() Research published in the leading journal of the national importanceTabaković S., Zeljković M., Živković A., Movrin D., Grujić J.: Development of the endoprosthesis of the femur according to the characteristics of a specific patient with using modern methods for product design and rapid prototyping, Journal for Technology of Plasticity, 2012, Vol. 37, No 2, pp. 195-208, ISSN 0354-3870
() Research published in the leading journal of the national importanceTABAKOVIĆ, S., ZELJKOVIĆ, M., GATALO, R.: A contribution to workspace analysis of machine tools based on parallel mechanism, Journal of Machine Engineering, 2007, Vol. 7, No. 1, str. 80- 90, ISSN 1895-7595.
() Research published in the leading journal of the national importanceMilojević Z., Tabaković S., Zeljković M., Živković A., Navalušić S.: Methodology of Knee Bones Models 3D Printing Based on CT Series of Images, Machine Design, 2017, Vol. 9, No 2, pp. 69-72, ISSN 1821-1259
() Research published in the leading journal of the national importanceTabaković S., Zeljković M., Živković A., Movrin D., Grujić J.: Development of the endoprosthesis of the femur according to the characteristics of a specific patient with using modern methods for product design and rapid prototyping, Journal for Technology of Plasticity, 2012, Vol. 37, No 2, pp. 195-208, ISSN 0354-3870
() Research published in the journal of the national importanceBlanuša V., Zeljković M., Vilotić D., Tabaković S.: The specificity of punch presses programming, Journal for Technology of Plasticity, 2011, Vol. 36, No 2, pp. 121-235, ISSN 0354-3870
() Research published in the scientific journalMlađenović C., Tabaković S., Zeljković M.: Kinematic analysis of machine tool based on O-X glide hybrid mechanism using a symbolic virtual model, Journal of Production Engineering, 2012, Vol. 15, No 1, pp. 37-40, ISSN 1821-4932
() Research published in the scientific journalTabaković S., Živković A., Grujić J., Zeljković M.: Using CAD/CAE software systems in the design process of modular, revision total hip endoprosthesis, Academic Journal of Manufacturing Engineering, 2011, Vol. 9, No 2/2011, pp. 97-102, ISSN 1583-7904
() Research published in the scientific journalTabaković S., Gatalo R., Zeljković M.: Analysis of Workspace of Machine Tools Based on Parallel Kinematics, Academic Journal of Manufacturing Engineering, 2010, pp. 88-96, ISSN 1583-7904
() Research published in the scientific journalŽivković A., Zeljković M., Tabaković S.: Matematical Model for the Roller Bearing Life Determination, Academic Journal of Manufacturing Engineering, 2010, Vol. 8, No 3/2010, pp. 108-115, ISSN 1583-7904
() Research published in the scientific journalGavrilov V., Zeljković M., Tabaković S.: Projektovanje koncepcije prenosnika za glavno kretanje mašina alatki za obradu rotacionim alatima, Zbornik radova Fakulteta tehničkih nauka, 2010, Vol. 1, pp. 25-28, ISSN 0350-428X
() Research published in the scientific journalMikalački Ž., Zeljković M., Tabaković S.: Projektovanje zglobnih prenosnika primenom savremenih programskih sistema, Zbornik radova Fakulteta tehničkih nauka, 2010, No 14, pp. 2893-2896, ISSN 0350-428X
() Report from the meeting of the national importance printed in its entiretyTabaković S., Sekulić J., Grujić J., Zeljković M., Živković A.: Remodelovanje tumorske modularne endoproteze zgloba kuka, 17. Infoteh-Jahorina, Jahorina: Elektrotehnički fakultet Istočno Sarajevo, 21-23 Mart, 2018
() Report from the meeting of the national importance printed in its entiretyTabaković S., Knežev M., Zeljković M., Živanović S., Štrbac B.: Analiza i verifikacija obrade složenih geometrijskih površina operacijom troosnog glodanja na nu mašinama alatkama, 41. JUPITER konferencija, Beograd, 5-7 Jun, 2018
() Report from the meeting of the national importance printed in its entiretySekulić J., Grujić J., Tabaković S., Knežev M., Živković A., Zeljković M.: Računarsko modelovanje tumorske endoproteze zgloba lakta, 16. Infoteh-Jahorina, Jahorina, 22-24 Mart, 2017, pp. 458-461, ISBN 978-99976-710-0-4
() Report from the meeting of the national importance printed in its entiretyTabaković S., Zeljković M., Živanović S., Tabaković N.: Verifikacija kinematskih mogućnosti mašine alatke bazirane na hibridnoj kinematici primenom virtuelnog prototipa, 15. Međunarodni naučno-stručni simpozijum INFOTEH-JAHORINA, Jahorina: Elektrotehnički fakultet, Istočno Sarajevo, 16-18 Mart, 2016, pp. 402-408, ISBN 978-99955-763-9-4
() New laboratory facilty, new experimental facilty, new technological procedureŽivković A., Zeljković M., Rodić M., Mijušković M., Borojev Lj., Tabaković S.: Opitni uređaj za određivanje veka integrisanog ležaja točka, 2011
() New laboratory facilty, new experimental facilty, new technological procedureŽivković A., Zeljković M., Rodić M., Mijušković M., Borojev Lj., Tabaković S.: Opitni uređaj za određivanje veka integrisanog ležaja točka, Korisnik A.D. „FKL“ temerin, Projekat TR 14048, iz oblasti tehnološkog razvoja pod nazivom: Istraživanje i razvoj kotrljajnih ležajnih sklopova i njihovih komponenti, 2010
() Prototype, new methods, software, standardized and certified instrumentTabaković S., Zeljković M., Milojević Z., Živković A.: Programski sistem za automatizovanu akviziciju morfoloških karakteristika proksimalnog segmenta femura, 2013
() Prototype, new methods, software, standardized and certified instrumentTabaković S., Milojević Z., Zeljković M., Živković A., Grujić J.: Programsko rešenje za projektovanje tela endoproteze zgloba kuka, 2012
() Prototype, new methods, software, standardized and certified instrumentŽivković A., Zeljković M., Tabaković S.: Programsko rešenje za analizu ponašanja kugličnih ležaja, 2013
() Realized patent, breed, sort or race, architectural, civil and urban original work Tabaković S., Zeljković M., Mlađenović C., Gatalo R.: Uređaj za manipulaciju radnim predmetima ili alatima kod mašina alatki i industrijskih manipulatora, Beograd, Zavod za intelektualnu svojinu, Glasnik intelektualne svojine, 2012, UDK: Broj patenta RS20121243
() Research published in the journal of the national importanceTABAKOVIĆ, S., GATALO, R., ZELjKOVIĆ, M.: Razvoj segmenata kompleksnog programskog sistema za automatizovano projektovanje mašina alatki na bazi paralelnih mehanizama, INFOTEH, Jahorina: Zbornik radova, 2003, str. 133- 137
() Invited lectures from the meeting of the national importance printed in its entiretyGatalo, R., Navalušić, S., Zeljković, M., Tabaković, S.: Primena veštečke inteligencije u projektovanju proizvoda, 26. savetovanje proizvodnog mašinstva Jugoslavije sa međunarodnim učešćem, Kraljevo: Mašinski fakultet Kraljevo, 2000, str. XIII- XXV,
() Invited lectures from the meeting of the national importance printed in its entiretyGatalo, R., Zeljković, M., Borojev, Lj., Tabaković, S.: Razvoj fleksibilnih tehnoloških sistema za obradu skidanjem materijala, 32. Savetovanje proizvodnog mašinstva Srbije sa međunarodnim učešćem, Novi Sad: Fakultet tehničkih nauka, Novi Sad, 18-20 septembar, 2008, str. 313- 332, ISBN 978-86-7892-131-5.
() Report from the meeting of the national importance printed in its entiretyKONJEVIĆ Z.; GATALO R.; HODOLIČ J.; TABAKOVIĆ S.: Prilog primeni objektno-orijentisanog prilaza u automatizaciji postupka projektovanja, 25 JUPITER konferencija 12 Simpozijum CAD/CAM, Beograd: 1999, str. 2.85- 2.90, ISBN 86-7083-340-9.
() Report from the meeting of the national importance printed in its entiretyTABAKOVIĆ, S., ZELjKOVIĆ, M., GATALO, R.: Primena programskog okruženja MATLAB u procesu analize radnog prostora mašina alatki na bazi paralelnih mehanizama, 27. JUPITER konferencija - 23. simpozijum NU-ROBOTI-FTS, Beograd: Zbornik radova, 2001, str. 3.27- 3.30, ISBN 86-7083-415-4.
() Report from the meeting of the national importance printed in its entiretyTABAKOVIĆ, S., ZELjKOVIĆ, M., GATALO, R.: Prilog razvoju sistema za automatizovano projektovanje rekonfigurabilnih tehnoloških sistema na bazi paralelnih mehanizama, 28. JUPITER konferencija – 24. simpozijum NU-ROBOTI-FTS, Beograd: Zbornik radova, 2002, str. 3.23- 3.26, ISBN 86-7083-430-8.
() Report from the meeting of the national importance printed in its entiretyTABAKOVIĆ, S., GATALO, R., ZELjKOVIĆ, M.: Prilog razvoju sistema za automatizovano projektovanje i analizu mašina alatki na bazi paralelnih mehanizama, 29. savetovanje proizvodnog mašinstva Jugoslavije sa međunarodnim učešćem, Beograd: 2002, str. 105- 109,
() Report from the meeting of the national importance printed in its entiretyGATALO, R., TABAKOVIĆ, S., ZELjKOVIĆ, M., ŠALETIĆ, S.: Prilog primeni savremenih inženjerskih sredstava i metoda u procesu unapređenja tehnološkog procesa izrade ključnih komponenti automata za istakanje goriva, 29. JUPITER konferencija - 25. simpozijum NU-ROBOTI-FTS, Beograd: Zbornik radova, 2003, str. 3.29- 3.32, ISBN 86-7082-459-6.
() Report from the meeting of the national importance printed in its entiretyBOROJEV, Lj., ZELjKOVIĆ, M., TABAKOVIĆ, S., BANjAC, I.: Prilog značaju ispitivanja retrofitovanih mašina, VIII međunarodna konferencija MMA 2003-Fleksibilne tehnologije, Novi Sad: Zbornik radova, 2003, str. 33- 34,
() Report from the meeting of the national importance printed in its entiretyTABAKOVIĆ, S., GATALO, R., ZELjKOVIĆ, M.: Analiza tačnosti aproksimacije profila pri generisanju upravljačkog programa za CNC mašine primenom programskog sistema Pro/ENGINEER, VIII međunarodna konferencija MMA 2003- Fleksibilne tehnologije, Novi Sad: Zbornik radova, 2003, str. 117- 118
() Report from the meeting of the national importance printed in its entiretyZELjKOVIĆ, M., MILOJEVIĆ, Z., ZELjKOVIĆ, Ž.,TABAKOVIĆ, S.: Razvoj softverskog rešenja ciklusa profilisanja tocila, VIII međunarodna konferencija MMA 2003 - Fleksibilne tehnologije, Novi Sad: Zbornik radova, 2003, str. 55- 56
() Report from the meeting of the national importance printed in its entiretyNAVALUŠIĆ, S., ZELjKOVIĆ, M., MILOJEVIĆ, Z., TABAKOVIĆ, S.: Rekonfiguracija i retrofiting – trend u razvoju mašina alatki, 30. JUPITER konferencija, 26. simpozijum NU-Roboti-FTS, Beograd: Zbornik radova – CD ROM, 2004, str. 3.59- 3.64, ISBN 86-7083-488-X.
() Report from the meeting of the national importance printed in its entiretyTABAKOVIĆ, S., GATALO, R., ZELjKOVIĆ, M.: Prilog razvoju kompleksnog programskog sistema za projektovanje i optimizaciju mašina alatki na bazi paralelnih mehanizama, 31. JUPITER konferencija, 27. simpozijum NU-ROBOTI-FTS, Zlatibor, Zlatibor: Zbornik radova – CD ROM, 2005, str. 3.16- 3.20, ISBN 86-7083-508-8.
() Report from the meeting of the national importance printed in its entiretyTABAKOVIĆ, S., ZELJKOVIĆ, M., ZELJKOVIĆ, Ž.:: Greške aproksimacije složenih putanja alata u savremenim CAM programskim sistemima, 32. JUPITER konferencija, 28. simpozijum NU*ROBOTI*FTS, Zlatibor: Mašinski fakultet, Beograd, 09-11 05, 2006, str. 2.6- 2.11, ISBN ISBN 86-7083-557-6.
() Report from the meeting of the national importance printed in its entiretyTABAKOVIĆ, S., ZELjKOVIĆ, M., GATALO, R.: Primena savremenih programskih okruženja za analizu radnog prostora paralelnih mehanizama, 33 JUPITER konferencija, 29. simpozijum Nu-ROBOTI-FTS, Zlatibor: Zbornik radova na CD ROM-u, 2007, str. 3.25- 3.30, ISBN 978-86-7083-592-4.
() Report from the meeting of the national importance printed in its entiretyPEJIĆ , V., ZELjKOVIĆ, M., JOKANOVIĆ, S., TABAKOVIĆ, S.: Postprocesiranje NC podataka u okviru savremenih CADCAM sistema, VIII Međunarodni naučno-stručni skup o dostignućima elektrotehnike, mašinstva i informatike DEMI 2007, Banjaluka: Zbornik radova, 2007, str. 175- 180, ISBN 978-99938-39-15-6.
() Report from the meeting of the national importance printed in its entiretyTabaković, S., Zeljković, M., Gatalo, R.: Automatizacija procesa modeliranja kompleksnih sklopova na primeru projektovanja mašina alatki na bazi paralelnih mehanizama, 34. Jupiter konferencija, Beograd: Mašinski fakultet Beograd, jun, 2008, str. 3.1- 3.6, ISBN 978-86-7083-628-0.
() Report from the meeting of the national importance printed in its entiretyĐurić, R., Zeljković, M., Živković, A., Tabaković, S.: Uticaj pojedinih parametara na dinamičko ponašanje sklopa glavnog vretena, 32. Savetovanje proizvodnog mašinstva Srbije sa menunarodnim učešćem, Novi Sad: Fakultet tehničkih nauka, Novi Sad, 18-20 septembar, 2008, str. 361- 364, ISBN 978-86-7892-131-5.
() Report from the meeting of the national importance printed in its entiretyTabaković S., Zeljković, M., Gatalo, R.: Automatizacija procesa projektovanja na primeru mašina alatki na bazi paralelnih mehanizama, 32. Savetovanje proizvodnog mašinstva Srbije sa menunarodnim učešćem, Novi Sad: Fakultet tehničkih nauka, Novi Sad, 18-20 septembar, 2008, str. 401- 404, ISBN 978-86-7892-131-5.
() Report from the meeting of the national importance printed in its entiretyTabaković, S., Zeljković, M.: Unapređenje karakteristika kardanskih vratila modifikovanjem elemenata univerzalnih zglobova, DEMI 09, Banjaluka: Mašinski fakultet Banjaluka, 28-29 maj, 2009, str. 389- 394, ISBN 978-99938-39-23-1.
() Report from the meeting of the national importance printed in its entiretyTabaković, S., Živković, A., Gatalo, R., Zeljković, M., Mijušković, M.: Unapređenje karakteristika univerzalnog zgloba optimizacijom geometrije pojedinih njegovih elemenata, XXXIII SAVETOVANJE PROIZVODNOG MAŠINSTVA SRBIJE 2009 sa međunarodnim učešćem, Beograd: Mašinski fakultet Beograd, 16-17 jun, 2009, str. 119- 122, ISBN 978-86-7083-662-4.
() Significantly improved existing product or technologyGatalo, R., Zeljković, M., Tabaković, S., i dr.: Projektovanje tehnologije izrade kućišta krilne pumpe alatkama primenom metode minimizacije greške aproksimacije profila pumpe, rađeno za: Rajić a.d. Bački Jarak, korisnik: Rajić a.d. Bački Jarak, 2002.
() Significantly improved existing product or technologyGatalo, R., Zeljković, M., Tabaković, S., i dr.: Unapređenje konstrukcije i projektovanje tehnologije izrade tela pištolja za istakanje goriva, rađeno za: Rajić d.o.o Bački Jarak, korisnik: Rajić d.o.o Bački Jarak, 2002.
() Prototype, new methods, software, standardized and certified instrumentMilojević, Z., Zeljković, Ž., Zeljković, M., Tabaković, S., Stankovski, S., Odri, S., Gatalo, R.: Programsko rešenje za oštrenje - profilisanje tocila za brušenje provlakača, rađeno za: A.D. Majevica Bačka Palanka, korisnik: A.D. Majevica Bačka Palanka, 2004.
() Report from the meeting of the national importance printed in its entiretyTABAKOVIĆ, S., GATALO, G., ZELjKOVIĆ; M.: Prilog analizi radnog prostora mašina alatki na bazi paralelnih mehanizama, VII međunarodna konferencija MMA2000 - Fleksibilne tehnologije, Novi Sad, Novi Sad: Zbornik radova, 2000, str. 73- 74,
() Report from the international meeting printed in its entiretyTabaković, S., Gatalo, R., Zeljković, M.: Analiza tačnosti aproksimacije profila pri generisanju upravljačkih programa za CNC mašine primenom programskog sistema PRO/Engineer, Zbornik radova, VIII Međunarodna konferencija MMA 2003 - Fleksibilne tehnologije, Novi Sad, 2003. str. 117, 118,
() Report from the international meeting printed in its entiretyTabaković, S., Zeljković, M., Zeljković, Ž.: Uporedna analiza tačnosti upravljačkih programa za izradu obradka složene geometrijske konfiguracije primenom CAM modula kompleksnih programskih sistema, Zbornik radova, VIII Naučno-stručna konferencija, Industrijski sistemi IS" 05, Herceg Novi, 2005, str. 455-462, ISBN 86-7780-008-5
() Report from the international meeting printed in its entiretyTabaković, S., Zeljković, M., Gatalo R.: Primena naprednih koncepcija razvoja postprocesora za numerički upravljane mašine alatke, Zbornik radova, 31. Savetovanje proizvodnog mašinstva sa međunarodnim učešćem, Kragujevac, 2006, str. 480 – 485, ISBN 86-80581-92-5
() Report from the international meeting printed in its entiretyPejić , V., Zeljković, M., Jokanović, S., Tabaković, S.: Postprocesiranje NC podataka u okviru savremenih CAD/CAM sistema, Zbornik radova, VIII Međunarodni naučno-stručni skup DEMI 2007, Banjaluka, 2007., str. 175-180, ISBN 978-99938-39-15-6
() Report from the international meeting printed in its entiretyTabaković, S., Zeljković M., Gatalo, R.: Analiza radnog prostora mašina alatki sa paralelnim mehanizmom na bazi tripoda, Zbornik radova na CD ROM-u, Infoteh - Jahorina, Vol. 6, ref. c -9, Jahorina, 2007.god., str. 165-169, ISBN 99938-624-2-8
() Research published in the international journalTabakovic, S., Zeljkovic, M., Gatalo, R., Zivkovic, A.: Programme suite for conceptual designing of parallel mechanisam-Based Robots and Machine tools, International Journal of Advanced Robotic Systems, 2013, Vol. 10, pp 1-13, ISSN 1729-8806.
() Research published in the international journalTabakovic, S., Zeljkovic, M., Zivkovic, A.: General parametric model of the body of the total hip endoprosthesis, Acta Polytechnica Hungarica, 2013, ISSN 1785- 8860.
TitleScientific areaHigher education institutionElection date
Full ProfessorMašine alatke, tehnološki sistemi i automatizacija postupaka projektovanjaUniversity of Novi Sad24.10.2018.
Associate ProfessorMašine alatke, tehnološki sistemi i automatizacija postupaka projektovanja24.10.2013.
Assistant ProfessorMachine Tools, Flexible Technological Systems and Automatization Processes DesignFaculty of Technical Sciences09.10.2008.
Assistant with PhDMachine Tools, Flexible Technological Systems and Automatization Processes DesignFaculty of Technical Sciences18.04.2008.
AssistantMachine Tools, Flexible Technological Systems and Automatization Processes DesignFaculty of Technical Sciences01.12.2004.
Intern AssistantMachine Tools, Flexible Technological Systems and Automatization Processes DesignFaculty of Technical Sciences10.10.2000.