Assoc. Prof. Sebastian Baloš


Missing picture!

Sebastian Baloš

Associate Professor


Telephone021/485-2339
E-mail
Academic titleAssociate Professor
Employee's biography not found!
Associate Professor
19.05.2016.
PositionFromToOrganizational unit
Assistant Professor19.05.2011.01.05.2016.Chair of Materials and Joining Technologies
Assistant with PhD01.12.2010.01.05.2011.Department of Production Engineering
Assistant - Magister26.05.2009.01.11.2010.Department of Production Engineering
Intern Assistant28.12.2005.01.05.2009.Department of Production Engineering
TitleIn institution
Analiza problematike izbora materijala i tehnologije termicke obrade celika namenjenog za balisticku zastitu

Bachelor's thesis

Mechanical Engineering

Faculty of Technical Sciences

2000

Uticaj mikrotalasnog zračenja ma mehaničke karakteristike PMMA biopolimera

Magister thesis

Mechanical Engineering

Faculty of Technical Sciences

2009

Nehomogeni dodatni razmaknuti metalni oklpo za oklopna vozila

PhD thesis

Mechanical Engineering

Faculty of Technical Sciences

2010

Criterium of productionDescription
() Researches published in the journals of the international importanceDojčinović M., Erić O., Rajnović D., Šiđanin (Sidjanin) L., Baloš S.: Effect of austempering temperature on cavitation behaviour of unalloyed ADI material, Materials Characterization, 2013, Vol. 82, pp. 66-72, ISSN 1044-5803
() Researches published in the journals of the international importanceRajnović D., Baloš S., Šiđanin (Sidjanin) L., Eric Cekic O., Grbovic Novakovic J.: Tensile properties of ADI material in water and gaseous environments, Materials Characterization, 2015, Vol. 101, pp. 26-33, ISSN 1044-5803
() Researches published in the journals of the international importancePavličević J., Špirkova M., Bera O., Jovičić M., Pilić B., Baloš S., Budinski-Simendić J.: The influence of ZnO nanoparticles on thermal and mechanical behavior of polycarbonate-based polyurethane composites, Composites: Part B: Engineering, 2014, Vol. 60, pp. 673-679, ISSN 1359-8368
() Research published in the top international journalEric Cekic O., Šiđanin (Sidjanin) L., Rajnović D., Baloš S.: Austempering kinetics of Cu-Ni alloyed austempered ductile iron, Metals and Materials International, 2014, Vol. 20, No 6, pp. 1131-1138, ISSN 1598-9623
() Research published in the top international journalRadisavljevic I., Baloš S., Nikacevic M., Šiđanin (Sidjanin) L.: Optimization of geometrical characteristics of perforated plates, Materials and Design, 2013, Vol. 49, pp. 81-89, ISSN 0261-3069
() Research published in the top international journalBaloš S., Šiđanin (Sidjanin) L.: Metallographic study of non-homogenousarmour impacted by armour-piercing incendiary ammunition, Materials and Design, 2011, Vol. 32, pp. 4022-4029, ISSN 0261-3069
() Research published in the top international journalBaloš S., Arlan B., Alan P.: Roman mystery iron blades from Serbia , Materials Characterization, 2009, Vol. 60, No 4, pp. 271-276, ISSN 1044-5803
() Research published in the top international journalBaloš S., Šiđanin (Sidjanin) L.: Microdeformation of soft particles in metal matrix composites, Journal of Materials Processing Technology, 2009, pp. 482-487, ISSN 0924-0136
() Research published in the top international journalBaloš S., Arlan B., Alan P.: Roman mystery iron blades from Serbia, Microscopy and microanalysis, 2007, Vol. 13, No Supplement S02, pp. 1100-1101, ISSN 1431-9276
() Research published in the top international journalBaloš S., Radisavljević I., Rajnović D., Dramićanin M., Tabaković S., Erić-Cekić O., Šiđanin (Sidjanin) L.: Geometry, mechanical and ballistic properties of ADI material perforated plates, Materials and Design, 2015, Vol. 83, pp. 66-74, ISSN 0261-3069
() Research published in the top international journalBaloš S., Pilić B., Marković D., Pavličević J., Lužanin O.: Poly(methyl-methacrylate) nanocomposites with low silica addition, Journal of Prosthetic Dentistry, 2014, Vol. 111, No 4, pp. 327-334, ISSN 0022-3913
() Research published in the top international journalLazarević Z., Jovalekić Č., Sekulić D., Milutinović A., Baloš S., Slankamenac M., Romčević N.: Structural, electrical and dielectric properties of spinel nickel ferrite prepared by soft mechanochemical synthesis, Materials Research Bulletin, 2013, Vol. 48, No 10, pp. 4368-4378
() Research published in the top international journalJelić M., Boukos N., Lalović M., Romčević N., Leovac V., Hadžić B., Baloš S., Jovanović Lj., Slankamenac M., Živanov M., Vojinović-Ješić Lj.: Synthesis, structure and photoluminescence properties of copper(II) and cobalt(III) complexes with pyridoxalaminoguanidine, Optical Materials, 2013, Vol. 35, No 12, pp. 2728-2735, ISSN 0925-3467
() Research published in the top international journalGrilli M.L., Bellezze T., Gamsjaeger E., Rinaldi A., Novak P., Baloš S., Piticescu R.R., Ruello M.L., Solutions for Critical Raw Materials under Extreme Conditions: a Review, Materials, 2017, Vol. 10 No. 3, ISSN: 1996-1944
() Research published in the top international journalMilutinović M., Baloš S., Plančak M., Movrin D., Comparison оf Some Mechanical Properties аnd Micro-Topography оf A Component With NonAxisymmetric Geometry Manufactured by Cold Orbital and Hot Forging, Journal of Materials Processing Technology 2017, Vol. 249, Str. 179-192, ISSN: 0924-0136
() Research published in the top international journalBaloš S., Šiđanin L., Dramićanin M., Labus Zlatanović D., Pilić B., Jovičić M., Modification of Cellulose and Rutile Welding Electrode Coating by Infiltrated TiO2 Nanoparticles, Metals and Materials International 2016, Vol. 22, No. 3, Str. 509-518 ISSN: 1598-9623
() Research published in the top international journalTerek P., Kovačević L., Miletić A., Panjan P., Baloš S., Škorić B., Kakaš D., Effects of die core treatments and surface finishes on the sticking and galling tendency of Al–Si alloy casting during ejection, Wear 2016, Vol. 356, Str. 122-134, ISSN: 0043-1648
() Research published in the top international journalRadanović M., Jelić M., Romčević N., Boukos N., Vojinović-Ješić Lj., Leovac V., Hadžić B., Bajac B., Nađ L., Charindou C., Baloš S., Synthesis, structure and photoluminescence of (PLAGH)2[ZnCl4] and comparative analysis of photoluminescence properties with tris(2,2‚-bipyridine)-ruthenium(II), Materials Research Bulletin 2015, Vol. 70, Str. 951-957, ISSN: 0025-5408
() Research published in the top international journalLazarević Z., Jovalekić Č, Sekulić D., Milutinović A., Baloš S., Slankamenac M., Romčević N., Structural, electrical and dielectric properties of spinel nickel ferrite prepared by soft mechanochemical synthesis, Materials Research Bulletin 2013, Vol. 48, No. 10, Str. 4368-4378, ISSN: 0025-5408
() Research published in the prominent international journalBaloš S., Milutinović M., Potran M., Vuletić J., Puškar T., Pepelnjak T., The mechanical properties of moulded and thermoformed denture resins, Strojniski vestnik - Journal of Mechanical Engineering, Vol. 61, No. 2, Str. 138-145, ISSN: 0039-2480
() Research published in the prominent international journalBaloš S., Grabulov V., Šiđanin (Sidjanin) L., Pantić M.: Wire fence as applique armor, Materials and Design, 2010, Vol. 31, pp. 1293-1301, ISSN 0261-3069
() Research published in the prominent international journalBaloš S., Grabulov V., Šiđanin (Sidjanin) L., Pantić M., Radisavljevic I.: Geometry, mechanical properties and mounting of perforated plates for ballistic application, Materials and Design, 2010, Vol. 31, pp. 2916-2924, ISSN 0261-3069
() Research published in the international journalKreszinger M., Toholj B., Ačanski A., Baloš S., Cincović M., Pećin M., Lipar M., Smolec O.: Tensile strength retention of resorptive suture materials applied in the stomach wall - an in vitro study, Veterinarski arhiv, 2018, Vol. 88, No 2, pp. 235-243, ISSN 0372-5480
() Research published in the international journalBaloš S., Pilić B., Petrović Đ., Petronijević Šarčev B., Šarčev I.: Flexural strength and modulus of autopolimerized poly(methyl methacrylate) with nanosilica, Vojnosanitetski pregled, 2018, Vol. 75, No 6, pp. 564-569, ISSN 0042-8450
() Research published in the international journalPerovic M., Baloš S., Kozak D., Bajić D., Vuherer T.: Influence of tool kinematic factors of friction stir welding on the characteristics of welded joints of forged plates mate of EN AW 7049A aluminium alloy, Tehnicki vjesnik - Technical Gazette, 2017, Vol. 24, No 3, pp. 723-728, ISSN 1330-3651
() Research published in the international journalPilić B., Radusin T., Ristić I., Silvestre C., Lazić V., Baloš S., Duraccio D.: Hydrophobic silica nanoparticles as reinforcing filler for poly(lactic acid) polymer matrix, Hemijska industrija, 2016, Vol. 70, No 1, pp. 73-80, ISSN 0367-598X
() Research published in the international journalBaloš S., Šiđanin (Sidjanin) L., Dramićanin M., Labus Zlatanović D., Antić A.: FSW welding of Al-Mg alloy plates with increased edge roughness using square pin tools of various shoulder geometries, Materiali in Tehnologije, 2016, Vol. 50, No 3, pp. 387-394, ISSN 1580-2949
() Research published in the international journalBaloš S., Rajnović D., Dramićanin M., Labus Zlatanović D., Erić-Cekić O., Grbović-Novaković J., Šiđanin (Sidjanin) L.: Abrasive wear behaviour of ADI material with various retained austenite content, International Journal of Cast Metals Research, 2016, Vol. 29, No 4, pp. 187-193, ISSN 1364-0461
() Research published in the international journalBaloš S., Šiđanin (Sidjanin) L., Pilić B.: Indentation size effect in autopolimerized and microwave post treated Poly(Methyl-methacrylate) denture reline resins, Acta Polytechnica Hungarica, Journal of Applied Sciences, 2014, Vol. 11, No 7, pp. 239-249, ISSN 1785-8860
() Research published in the international journalVrac D., Šiđanin (Sidjanin) L., Baloš S.: The effect of honing speed and grain size on surface roughness and material removal rate during honing, Acta Polytechnica Hungarica, Journal of Applied Sciences, 2014, Vol. 11, No 10, pp. 163-175, ISSN 1785-8860
() Research published in the international journalVrač D., Šiđanin (Sidjanin) L., Baloš S., Kovač P.: The influence of tool kinematics on surface texture, productivity, power and torque of normal honing, Industrial Lubrication and Tribology, 2014, Vol. 66, No 2, pp. 215-222, ISSN 0036-8792
() Research published in the international journalBaloš S., Šiđanin (Sidjanin) L.: Effect of tunneling defects on the joint strength efficiency, Materiali in Tehnologije, 2014, Vol. 48, No 4, pp. 491-496, ISSN 1580-2949
() Research published in the international journalBaloš S., Pilić B., Petronijević B., Marković D., Mirković S., Šarčev I.: Improving mechanical properties of flowable dental composite resin by adding silica nanoparticles, Vojnosanitetski pregled, 2013, Vol. 70, No 5, pp. 477-483, ISSN 0042-8450
() Research published in the international journalVrač D., Šiđanin (Sidjanin) L., Kovač P., Baloš S.: The influence of hohning process parameters on surface quality, productivity, cutting angle and coefficients of friction, Industrial Lubrication and Tribology, 2012, Vol. 64, No 2, pp. 77-83, ISSN 0036-8792
() Research published in the international journalVrač D., Šiđanin (Sidjanin) L., Baloš S.: Mechanical finishing honing: cutting regimes and surface texture, Industrial Lubrication and Tribology, 2011, Vol. 63, No 6, pp. 427-432, ISSN 0036-8792
() Research published in the international journalBaloš S., Balos T., Šiđanin (Sidjanin) L., Marković D., Pilić B., Pavličević J.: Study of PMMA biopolymer properties treated by microwave energy, Materiale Plastice, 2011, Vol. 48, No 02, pp. 127-131, ISSN 0025-5289
() Research published in the international journalRajnović D., Baloš S., Šiđanin (Sidjanin) L., Radeka M., Vučetić (Petrović) S., Zorić D., Ranogajec J.: The influence of polymer addition on flexural strength, fracture mode and porosity of traditional ceramics, Chemical Industry & Chemical Engineering Quarterly / CI&CEQ, 2011, Vol. 17, No 2, pp. 223-230, ISSN 1451-9372
() Research published in the international journalBaloš S., Grabulov V., Šiđanin (Sidjanin) L.: Future Armoured Troop Carrying Vehicles, Defence Science Journal, 2010, Vol. 60, No 5, pp. 483-490, ISSN 0011-748X
() Research published in the international journalBaloš S., Baloš T., Šiđanin (Sidjanin) L., Marković D., Pilić B., Pavličević J.: Flexural and impact strength of microwave treated autopolymerized poly(methyl-methacrylate), Materiale Plastice, 2009, No 46, pp. 261-265, ISSN 0025-5289
() Research published in the international journalSkakun (Francuski) P., Lengyel R., Baloš S., Movrin D., Milutinović M.: Cold Radial Extrusion of a Gear-Like Element with Flow Relief Opening, Tehnicki vjesnik - Technical Gazette, 2018, Vol. 25, No 5, pp. 1363-1369, ISSN 1330-3651, UDK: 62(05)=163.42=111
TitleScientific areaHigher education institutionElection date
Associate ProfessorMaterijali i tehnologije spajanjaUniversity of Novi Sad19.05.2016.
Assistant ProfessorMaterijali i tehnologije spajanjaFaculty of Technical Sciences19.05.2011.
LecturerMaterial Science and Engineering MaterialsFaculty of Technical Sciences02.07.2009.
AssistantMaterial Science and Engineering Materials26.05.2009.
Intern AssistantMaterial Science and Engineering MaterialsFaculty of Technical Sciences01.11.2006.