Assoc. Prof. Živko Pavlović


Missing picture!

Živko Pavlović

Associate Professor


Telephone021/485-2626
E-mail
Academic titleAssociate Professor
Employee's biography not found!
Associate Professor
25.09.2017.
PositionFromToOrganizational unit
Assistant Professor25.09.2012.Chair of Graphic Engineering and Design
Assistant with PhD19.05.2012.01.09.2012.Department of Graphic Engineering and Design
Assistant - Magister09.07.2007.01.05.2012.Department of Graphic Engineering and Design
Intern Assistant01.11.2005.01.06.2007.Department of Graphic Engineering and Design
TitleIn institution
Standardizacija i kontrola ofset štampe u konkretnim proizvodnim uslovima

Bachelor's thesis

Graphic Engineering and Design

Faculty of Technical Sciences

2002

Savremeni pristup razvoju merno kontrolnih traka za procesnu grafičku kontrolu

Magister thesis

Graphic Engineering and Design

Faculty of Technical Sciences

2007

Karakterizacija površinske strukture neštampajućih elemenata CtP termalne štamparske forme za ofset štampu

PhD thesis

Graphic Engineering and Design

Faculty of Technical Sciences

2012

Criterium of productionDescription
() Monographic study/chapter in M11 or research in the thematic collection of the leading international importancePavlović Ž., Dedijer S., Draganov S., Karlović I., Jurič (Rilovski) I.: Printing on Polymers, chapter Offset Printing, Amsterdam, Elsevier Inc, 2015, pp.. 217-238, ISBN 9780323374682
() Research published in the top international journalAdamović (Majkić) S., Prica M., Dalmacija B., Rapajić S., Novaković D., Pavlović Ž., Maletić S.: Feasibility of electrocoagulation/flotation treatment of waste offset printing developer based on the response surface analysis, Arabian Journal of Chemistry, 2015, ISSN 1878-5352, UDK: DOI: http://dx.doi.org/10.1016/j.arabjc.2015.03.018
() Research published in the prominent international journalUrbas R., Milošević R., Kašiković N., Pavlović Ž., Stankovič Elesini U.: Microcapsules application in graphic arts industry: a review on the state-of-the-art, Iranian Polymer Journal, 2017, Vol. 26, No 7, pp. 541-561, ISSN 1735-5265, UDK: doi:10.1007/s13726-017-0541-1
() Research published in the prominent international journalRisović D., Pavlović Ž.: Performance Assessment of Methods for Estimation of Fractal Dimension From Scanning Electron Microscope Images, Scanning, 2013, Vol. 35, No 6, pp. 402-411, ISSN 0161-0457
() Research published in the prominent international journalPavlović Ž., Muck T., Hladnik A., Karlović I.: A Comparative Study of Offset Plate Quality Parameters using Image Processing and Analytical Methods, Acta Polytechnica Hungarica, Journal of Applied Sciences, 2012, Vol. 9, No 6, pp. 181-193, ISSN 1785-8860
() Research published in the prominent international journalPavlović Ž., Novaković D., Cigula T.: Wear analysis of the offset printing plate`s non/printing areas depending on exploitation, Tehnicki vjesnik - Technical Gazette, 2012, Vol. 19, No 3, pp. 479-484, ISSN 1330-3651, UDK: 655.344:620.178.16
() Research published in the international journalPavlović Ž., Risović D., Novaković D.: Comparative study of direct and indirect, image-based profilometry in characterization of surface roughness,, Surface and Interface Analysis, 2012, Vol. 44, No 7, pp. 825-830, ISSN 0142-2421, UDK: Online ISSN:1096-9918
() Research published in the international journalPavlović Ž., Dedijer S., Kašiković N., Novaković D., Pál (Apro) M., Risović D.: Evaluation of effective models of offset CTP plate aluminium oxide surface roughness characterisation, International Journal of Surface Science and Engineering, 2017, Vol. 11, No 5, pp. 433-449, ISSN 1749-7868
() Research published in the international journalSpiridonov I., Boeva R., Lozanova-Doncheva I., Bozhkova T., Pavlović Ž., Vladić G., Kašiković N., Stančić M., Tacheva B.: Study of color characteristic changes of printed images under artificial ageing on different papers, Bulgarian Chemical Communications, 2017, Vol. 49, No L, pp. 229-236, ISSN 0324-1130
() Research published in the international journalPavlović Ž., Pál (Apro) M., Cigula T., Rumyana B., Boeva R., Spiridonov I., Bozhkova T., Prica M.: Comparative study of offset plate tone value reproduction using different measuring and image processing tools, Bulgarian Chemical Communications, 2017, Vol. 49, No L, pp. 222-228, ISSN 0324-1130
() Research published in the international journalBoeva R., Spiridonov I., Pavlović Ž., Vladić G.: Investigation of color characteristics changes of semi chemical pulp samples in process of ageing, Bulgarian Chemical Communications, 2017, Vol. 49, No L, pp. 126-129, ISSN 0324-1130
() Report from the international meeting printed in its entiretyPál (Apro) M., Dedijer S., Kašiković N., Vladić G., Novaković D., Pavlović Ž., Banjanin B.: Investigation of adhesive layer thickness distribution of perfect bounded broshures, 11. Innovations in Publishing, Printing and Multimedia Technologies, Kaunas: Kaunas University of Applied Sciences, 19-20 April, 2018, pp. 90-96
() Report from the international meeting printed in its entiretyMilošević R., Kašiković N., Pavlović Ž., Stančić M., Urbas R.: Characterization of Coated Prints With Fragranced Microcapsules, 9. INTERNATIONAL Symposium on Graphic Engineering and Design GRID, Novi Sad: Fakultet tehničkih nauka, 8-10 Novembar, 2018, pp. 181-188, ISBN 978-86-6022-115-7
() Report from the international meeting printed in its entiretyDedijer S., Tomić I., Pál (Apro) M., Jurič (Rilovski) I., Pavlović Ž., Milić N.: Repeatability and reproduction accuracy in electrophotography for color difference evaluations, 9. INTERNATIONAL Symposium on Graphic Engineering and Design GRID, Novi Sad: Faculty of Technical Sciences, 8-10 Novembar, 2018, pp. 313-321, ISBN 978-86-6022-115-7
() Report from the international meeting printed in its entiretyMilošević R., Kašiković N., Pavlović Ž., Stanković Elesini U., Kukuruzović D., Urbas R.: INFLUENCE OF MICROCAPSULES’ CONCENTRATION ON THE PHYSICAL AND SURFACE CHARACTERISTICS OF THE PRINTS, 2. 2nd International Printing Technologies Symposium – PrintIstanbul 2017, Istanbul: Marmara Üniversitesi, 11-12 October, 2017, pp. 133-142, ISBN 978-9944-0636-7-8
() Report from the international meeting printed in its entiretyKašiković N., Vladić G., Milošević R., Đurđević S., Jurič (Rilovski) I., Novaković D., Pavlović Ž.: RUBBING FASTNESS PROPERTIES OF DIGITAL PRINTED SAMPLES, 2. 2nd International Printing Technologies Symposium – PrintIstanbul 2017, Istanbul: Marmara Üniversitesi, 11-12 October, 2017, pp. 295-393, ISBN 978-9944-0636-7-8
() Report from the international meeting printed in its entiretyTomić I., Dedijer S., Jurič (Rilovski) I., Pál (Apro) M., Pavlović Ž., Vladić G.: Influence of Resolution and Print Settings on Colour Reproduction in Ink-Jet Printing, 2. 2nd International Printing Technologies Symposium – PrintIstanbul 2017, Istanbul: Marmara University, 11-12 October, 2017, pp. 273-282, ISBN 978-9944-0636-7-8
() Report from the international meeting printed in its entiretyDedijer S., Pál (Apro) M., Pavlović Ž., Vladić G., Novaković D.: Possibilites of Flexo Printing Plate Elements Characterisation by Image Processing, 5. International Joint Conference on Environmental and Light Industry Technologies, Budapest: Obuda University, 19-20 Novembar, 2015, pp. 82-91, ISBN 978-615-5460-60-9
() Report from the international meeting printed in extractsMilošević R., Kašiković N., Pavlović Ž., Stanković Elesini U., Cigula T., Urbas R.: Analysis of Coatings With Scented Microcapsules, 1. International Conference on Electron Microscopy of Nanostructures ((ELMINA), Beograd: Serbian Academy of Sciences and Arts, 27-29 Avgust, 2018, pp. 131-133, ISBN 978-86-7025-785-6
() Report from the international meeting printed in extractsUrbas R., Milošević R., Pavlović Ž., Kašiković N., Stankovič Elesini U.: Microcapsule structure and its application in the printing industry, 9. International Engineering Symposium at Banki Budapest, Budimpešta: Óbuda University Donát Bánki Faculty of Mechanical and Safety Engineering, 27 Novembar, 2017, pp. 83-83
() Report from the international meeting printed in extractsPál (Apro) M., Koltai L., Dedijer S., Kašiković N., Pavlović Ž., Vladić G., Tomić I.: Preliminary analysis of crack distribution for objective fold-crack assessment, 1. IJCELIT 2017 - International Joint Conference on Enviromental and Light Industry Technologies, Budapest: Rejtő Sándor Faculty of Light Industry and Environmental Protection Engineering, 23-24 Novembar, 2017, pp. 27-27, ISBN 978-963-449-061-6
() Report from the international meeting printed in extractsDedijer S., Pál (Apro) M., Tomić I., Pavlović Ž., Vasić J., Vladić G., Kašiković N.: Study of line and dot elements reproduction on digital flexo printing plates using flexcel nx imaging technology, 1. IJCELIT 2017 - International Joint Conference on Enviromental and Light Industry Technologies, Budapest: Rejtő Sándor Faculty of Light Industry and Environmental Protection Engineering, 23-24 Novembar, 2017, ISBN 978-963-449-061-6
() Defended Doctoral dissertationPavlović Ž.: Karakterizacija površinske strukture neštampajućih elemenata CtP termalne štamparske forme za ofset štampu, Novi Sad, 2012
() Defended Magister thesisPavlović Ž.: Savremeni pristup razvoju merno kontrolnih traka za procesnu grafičku kontrolu, Magistarska teza , Novi Sad, Fakultet tehničkih nauka, 2007
() Prototype, new methods, software, standardized and certified instrumentNovaković D., Pavlović Ž., Pavlović Ž., Zeljković Ž., Nedeljković U., Dedijer S., Kašiković N., Vladić G., Pál (Apro) M., Avramović D., Pinćjer I., Milić N., Tomić I., Jurič (Rilovski) I., Đurđević S.: Softverski model za unapređenje znanja i proizvodnje u grafičkoj industriji, Tehničko rešenje, 2015
TitleScientific areaHigher education institutionElection date
Associate ProfessorGrafičko inženjerstvoFaculty of Technical Sciences25.09.2017.
Assistant ProfessorGrafičko inženjerstvoFaculty of Technical Sciences25.09.2012.
AssistantGraphic Engineering and DesignFaculty of Technical Sciences30.06.2010.
LecturerGraphic Engineering and DesignFaculty of Technical Sciences11.06.2009.
AssistantGraphic Engineering and DesignFaculty of Technical Sciences09.07.2007.
Intern AssistantGraphic Engineering and DesignFaculty of Technical Sciences01.10.2001.