Born in 1984 in Niš, Republic of Serbia. He finished primary and secondary technical school in Bečej. He enrolled at the Faculty of Technical Sciences in Novi Sad in 2003, majoring in Industrial Systems, and graduated in 2008 as the student with the highest average grade in his generation at the Department of Industrial Engineering and Management. In 2008, he completed integrated undergraduate and master's studies with a Master's thesis on the topic of the Development of multifunctional products and enrolled in doctoral studies at the Faculty of Technical Sciences in Novi Sad. During his doctoral studies, he teaches the following subjects: Production and Service Systems, Production Strategies (LEAN, Kaizen), Technological and Business Forecasting, Product Development, and Design. He is also the author or co-author of a monograph chapter in a book, eight papers in prominent international journals, and a total of over 60 scientific papers. He presented and defended his doctoral dissertation on the topic of the Development of complex product configurators using the grouping procedure in September 2016. He is currently an associate professor at the Faculty of Technical Sciences, University of Novi Sad, and is actively working on the further development of his academic and research career.
() Monographic study/chapter in M12 or research in the thematic collection of the international importance
Lazarević M., Lazarević Đ., Suzić N., Sremčev N., Rikalović A.: PERSPECTIVES OF INTRODUCING THE RFID TECHNOLOGIES IN PLM, Novi Sad, Faculty of Technical Sciences; Vienna: DAAAM International; Stuttgart: Fraunhofer IAO, 2013, str. 171-194, ISBN 978-3-902734-00-6
() Research published in the prominent international journal
Pervaz J., Sremčev N., Stevanov B., Gusel L.: Simulation-Based Algorithm for Continuous Improvement of Enterprises Performance , International Journal of Simulation Modelling, 2024, Vol. 23, No. 2, ISSN 1726-4529
() Research published in the prominent international journal
Stevanov B., Sremčev N., Lazarević M., Anderla A., Sladojević S., Vidicki P.: Optimization of the Subassembly Production Process Using Simulation, International Journal of Simulation Modelling, 2022, Vol. 21, No. 4, pp. 663-674, ISSN 1726-4529
() Research published in the prominent international journal
Sremčev N., Stevanov B., Lazarević M., Mandić J., Tešić Z., Kuzmanović B.: Improving Process of Quotation Creation Through Value Stream Mapping and Simulation, International Journal of Simulation Modelling, 2019, Vol. 18, No 4, ISSN 1726-4529
() Research published in the prominent international journal
Anišić Z., Veža I., Suzić N., Sremčev N., Orčik A.: Improving product design with IPS-DFX methodology incorporated in PLM software, Tehnicki vjesnik - Technical Gazette, 2013, pp. 183-193, ISSN 1330-3651
() Research published in the prominent international journal
Suzić N., Stevanov B., Ćosić I., Anišić Z., Sremčev N.: Customizing Products trough Application of Group Technology: A Case Study of Furniture Manufacturing, Strojniski vestnik = Journal of Mechanical Engineering, 2012, ISSN 0039-2480
() Research published in the international journal
Popović Lj., Sremčev N., Purković D., Ćosić I.: Chemical Engineering in Technical and Technological Culture, Journal of the Serbian Chemical Society, 2024, ISSN 0352-5139
() Research published in the international journal
Lazarević M., Mandić J., Sremčev N., Vukelić Đ., Debevec M.: A systematic literature review of Poka-Yoke and novel approach to theoretical aspects, Strojniski vestnik - Journal of Mechanical Engineering, 2019, Vol. 65, No 7-8, pp. 454-467, ISSN 0039-2480
() Research published in the international journal
Lazarević M., Vukelić Đ., Stankovski S., Sremčev N., Ostojić G.: Enhancing Student Competence through Novel Student Enterprise Concept, International Journal of Engineering Education, 2017, Vol. 33, No 6(A), pp. 1824-1833, ISSN 0949-149X
() Research published in the journal of the international importance verified by the special resolution
Klašnja N., Sremčev N., Vukelić Đ., Simeunović N., Lazarević M.: Optimization of Cable Harness Assembly Systems Based on Lean Concept Application, International Journal of Industrial Engineering and Management, 2019, Vol. 10, No. 1, pp. 115-123, ISSN 2217-2661
() Report from the international meeting printed in its entirety
Anišić Z., Firstner (Fürstner) I., Nađ A., Sremčev N., Gogolak L.: Development of Improved Weel Hub Prototype Through Idealab Platform for Students's Contest, 9. The 9th International Symposium - KOD 2016 - Machine and Industrial Design in Mechanical Engineering, Balatonfured: Univerzitet u Novom Sadu, Fakultet tehničkih nauka, 9-12 Jun, 2016, pp. 23-28, ISBN 978-86-7892-821-5
() Report from the international meeting printed in its entirety
Lazarević M., Ćosić I., Vukelić Đ., Sremčev N., Bajčeta D.: Traceability of machining cutting tools and fixtures in the production system using the RFID technology, 26. DAAAM International Symposium, Zadar: DAAAM International, 21-24 Oktobar, 2015, pp. 415-422, ISBN 978-3-902734-05-1
() Report from the international meeting printed in its entirety
Pervaz J., Ćosić I., Šormaz D., Lazarević M., Simeunović N., Sremčev N.: Application of Group Technology in a Production of Cardboard Packaging and Printed Papers, 30. DAAAM International Symposium on Intelligent Manufacturing and Automation, Zadar: DAAAM International, 23-26 Oktobar, 2019, pp. 348-352, ISBN 978-3-902734-22-8
() Report from the international meeting printed in its entirety
Sremčev N., Ćosić I., Anišić Z., Lazarević M., Gechevska V.: Procedure phases for configuration system development, 26. DAAAM International Symposium, Zadar: Danube Adria Association for Automation and Manufacturing, DAAAM, 21-24 Oktobar, 2015, pp. 478-482, ISBN 978-390273407-5, UDK: ISSN: 17269679
() Report from the international meeting printed in its entirety
Sremčev N., Lazarević Đ., Ćosić I., Lazarević M., Rikalović A.: IMPROVEMENT OF MATERIAL FLOW IN SYSTEM FOR MANUFACTURING OF COOLING AND COOKING DEVICES, 6. International Symposium on Industrial Engineering (SIE), Beograd: Faculty of Mechanical Engineering, 24-25 Septembar, 2015, pp. 304-307, ISBN 978-86-7083-864-2
() Report from the international meeting printed in its entirety
Rikalović A., Ćosić I., Lazarević M., Sremčev N., Bajić B.: Machine Learning Techniques for Smart Manufacturing: Applications and Challenges in Industry 4.0, 9. International Scientific and Expert Conference (TEAM), Novi Sad: Faculty of Technical Sciences, Department of Industrial Engineering and Management,, 10-12 Oktobar, 2018, pp. 29-38, ISBN 978-86-6022-098-3
() Report from the international meeting printed in its entirety
Ćopić M., Lazarević M., Dragičević D., Sremčev N., Ostojić G.: Improving the Dyehouse Production Process by QR Code Application as Poka Yoka, 17. International Scientific Conference on Industrial Systems, Novi Sad, 4-6 Oktobar, 2017, pp. 188-193, ISBN 978-86-7892-978-6
() Report from the international meeting printed in its entirety
Sremčev N., Ćosić I., Anišić Z., Lazarević M., Veža I.: Algorithm for Product Configurator Development on the Principles of Group Technology, 19. International Research/Expert Conference "Trends in the Development of Machinery and Associated Technology" - TMT, Barcelona: Faculty of Mechanical Engineering in Zenica, Escola Tecnica Superior D'Enginyeria Industrial de Barcelona - Universitat Politecnica de Catalunya, Spain, 22-23 Jul, 2015, pp. 133-136, ISBN ISSN 1840-4944
() Report from the international meeting printed in its entirety
Rankov S., Ćosić I., Šormaz D., Lazarević M., Sremčev N.: Production Flow Analysis in Textile Production, 17. International Scientific Conference on Industrial Systems, Novi Sad: Faculty of Technical Sciences, 4-6 Oktobar, 2017, pp. 44-49, ISBN 978-86-7892-978-6
() Report from the international meeting printed in its entirety
Sremčev N., Ćosić I., Anišić Z., Lazarević M., Gechevska V.: Procedure phases for configuration system development, 26. DAAAM International Symposium, Zadar: Danube Adria Association for Automation and Manufacturing, DAAAM, 21-24 Oktobar, 2015, pp. 478-482, ISBN 978-390273407-5, UDK: ISSN: 17269679
() Report from the international meeting printed in its entirety
Suzić N., Lazarević M., Sremčev N.: Design for Product Variety, 6. Simpozijum o konstruisanju, oblikovanju i dizajnu – KOD, Palić: Fakultet tehničkih nauka, 29-30 Septembar, 2010, pp. 219-222, ISBN 978-86-7892-278-7
() Report from the international meeting printed in its entirety
Sremčev N., Suzić N., Ćosić I., Anišić Z.: Enabling DFx Tools Using PLM Software Solutions, 1. Regional Conference - Mechatronics in Practice and Education (MECH-CONF), Subotica, 8-10 Decembar, 2011, pp. 363-369, ISBN 978-86-85409-67-7, UDK: 007.5 (082)
() Report from the international meeting printed in its entirety
Gračanin D., Stevanov B., Sremčev N., Tešić Z.: Manufacturing shop control integration: a concept and an example, 1. Regional Conference - Mechatronics in Practice and Education (MECH-CONF), Subotica: Subotica Tech, College of Applied Sciences, 8-10 Decembar, 2011, pp. 180-185, ISBN 978-86-85409-67-7
() Report from the international meeting printed in its entirety
Suzić N., Anderla A., Stefanović D., Veža I., Sremčev N.: Successsfully Solving the Configuration of Mass Customized Products , 7. Simpozijum o konstruisanju, oblikovanju i dizajnu – KOD, Balatonfured: Faculty of Technical Sciences, 24-26 Maj, 2012, pp. 75-78, ISBN 978-86-7892-399-9
() Report from the international meeting printed in its entirety
Sremčev N., Suzić N., Anišić Z., Gecevska V.: Improving Product Design Efficiency Using DFX Tools in PLM Surroundings, 7. Simpozijum o konstruisanju, oblikovanju i dizajnu – KOD, Balatonfured: Faculty of Technical Sciences, 24-26 Maj, 2012, pp. 79-84, ISBN 978-86-7892-399-9
() Report from the international meeting printed in its entirety
Suzić N., Anišić Z., Orčik A., Sremčev N.: Company Size and Successful Mass Customization, 5. International Conference on Mass Customization and Personalization in Central Europe MCP-CE, Novi Sad: Faculty of Technical Sciences, 19-21 Septembar, 2012, pp. 241-246, ISBN 978-86-7892-432-3
() Report from the international meeting printed in its entirety
Sremčev N., Ćosić I., Suzić N., Stevanov B.: APPLICATION OF PLM SYSTEMS IN GROUP TECHNOLOGY APPROACH, 23. DAAAM International Symposium, Zadar: DAAAM International, Vienna, Austria, EU, 2012, 24-27 Oktobar, 2012, pp. 981-984, ISBN 978-3-901509-91-9, UDK: ISSN 2304-1382
() Report from the international meeting printed in its entirety
Sremčev N., Lazarević Đ., Lazarević M., Suzić N.: Information Management of Distributed Production Systems, 9. International May Conference on Strategic Management - Majska konferencija o strategijskom menadžmentu (MKSM), Bor: Univerity of Belgrade, Technical Faculty in Bor, Management Department, 24-26 Maj, 2013, pp. 514-522, ISBN 978-86-6305-006-8
() Report from the international meeting printed in its entirety
Orčik A., Anišić Z., Fuerstner I., Suzić N., Sremčev N.: Co-creation in product development - students in an innovation contest, 1. International Conference on Technology Transfer - ICTT, Niš: University of Niš, and Faculty of Electronic Engineering Niš, 20-21 Jun, 2013, pp. 259-264, ISBN 978-86-6125-083-5
() Report from the international meeting printed in its entirety
Lazarević M., Ćosić I., Suzić N., Sremčev N., Lazarević Đ.: Research of Possibility to Implement Lean Principles in Product Disassembly Systems, 2. International Scientific Conference on Lean Technologies - LeanTech, Beograd: University of Belgrade – Faculty of Organizational Sciences, 5-6 Septembar, 2013, pp. 27-38, ISBN 978-86-7680-283-8
() Report from the international meeting printed in its entirety
Sremčev N., Stevanov B., Suzić N., Anišić Z.: Managing Data in Multiple Locations Production Systems: Case Study of The Railway Braking Devices Overhaul, 2. Regional Conference - Mechatronics in Practice and Education (MECHEDU), Subotica: Subotica Tech – College of Applied Sciences, , 5-6 Decembar, 2013, pp. 93-98, ISBN 978-86-7892-565-8
() Report from the international meeting printed in its entirety
Lazarević Đ., Ćosić I., Lazarević M., Rikalović A., Sremčev N.: Application of Group Tools in Production of Printed and Laminated Cardboard Packaging for Total In-process Time Reduction, 24. DAAAM International Symposium, Zadar: Procedia Engineering, DAAAM International, 23-26 Oktobar, 2013, pp. 1381-1387, ISBN 978-3-901509-97-1
() Report from the international meeting printed in its entirety
Lazarević Đ., Ćosić I., Lazarević M., Sremčev N., Suzić N.: CLASSIFIER FOR PLANK SHAPED PARTS MADE IN FURNITURE INDUSTRY, 12. International Conference – Maintenance and production engineering – KODIP, Budva: Inženjerska akademija Crne Gore, 18-21 Jun, 2014, pp. 323-326, ISBN 978-9940-527-35-8
() Report from the international meeting printed in its entirety
Lazarević M., Krsmanović C., Ćosić I., Lazarević Đ., Sremčev N.: Student Enterprise: Idea and practice, 16. International Scientific Conference on INDUSTRIAL SYSTEMS - IS, Novi Sad: University of Novi Sad - Faculty of Technical Sciences, Department of Industrial Engineering and Management, 15-17 Oktobar, 2014, pp. 23-26, ISBN 978-86-7892-652-5
() Report from the international meeting printed in its entirety
Suzić N., Orčik A., Lazarević Đ., Sremčev N., Stevanov B.: Analysis of Product Lifecycle for Railway Braking Devices with Focus on Overhaul Cycles, 16. International Scientific Conference on INDUSTRIAL SYSTEMS - IS, Novi Sad: University of Novi Sad - Faculty of Technical Sciences, Department of Industrial Engineering and Management, 15-17 Oktobar, 2014, pp. 27-32, ISBN 978-86-7892-652-5
() Report from the international meeting printed in extracts
Lazarević M., Ostojić G., Stankovski S., Sremčev N., Vukelić Đ.: Improvement of product disassemly and recycling process based on LCA analisys, 20. SETAC Europe - LCA Case Study Symposium, Novi Sad: SETAC, 24-26 Novembar, 2014, pp. 62-62, ISBN 2310-3191
() Research published in the leading journal of the national importance
Medojević M., Medojević M., Radaković N., Lazarević M., Sremčev N.: A Conceptual Solution of Low-Cost Temperature Data Logger With Relatively High Accuracy, International Journal of Industrial Engineering and Management, 2018, Vol. 9, No 1, pp. 53-58, ISSN 2217-2661, UDK: UDC 621.38:007.5
() Research published in the scientific journal
Sremčev N., Lazarević M., Krainović B., Mandić J., Medojević M.: Improving teaching and learning process by applying Lean thinking, Procedia Manufacturing, 2018, Vol. 17, pp. 595-602, ISSN 2351-9789
() Report from the meeting of the national importance printed in its entirety
Lazarević M., Ćosić I., Sremčev N., Lazarević Đ., Ostojić G.: Povećanje efikasnosti rada sistema za demontažu proizvoda primenom identifikacionih tehnologija, 1. International Scientific Conference "Metrology and Quality in Production Engineering and Environmental Protection" - ETIKUM, Novi Sad: Faculty of Technical Sciences, Department of Production Engineering, 12-13 Jun, 2013, pp. 121-128, ISBN 978-86-7892-512-2
