() Researches published in the journals of the international importance
Orošnjak M., Jocanović M., Čavić M., Karanović V., Penčić M.: Industrial Maintenance 4(.0) Horizon Europe: Consequences of the Iron Curtain and Energy-Based Maintenance, Journal of Cleaner Production, 2021, Vol. 314, pp. 1-16, ISSN 0959-6526
() Research published in the prominent international journal
Nikolić N., Antonić Ž., Dorić J., Ružić D., Galamboš S., Jocanović M., Karanović V.: An Analytical Method for the Determination of Temperature Distribution in Short Journal Bearing Oil Film, Symmetry, 2020, Vol. 12, No. 4, pp. 1-19, ISSN 2073-8994
() Research published in the prominent international journal
Duđak Lj., Milisavljević S., Jocanović M., Kiš (Kiss) F., Šević D., Karanović V., Orošnjak M.: Life Cycle Assessment of Different Waste Lubrication Oil Management Options in Serbia, Applied Sciences, 2021, ISSN 2076-3417
() Research published in the prominent international journal
Jocanović M., Agarski B., Karanović V., Orošnjak M., Ilić Mićunović M., Ostojić G., Stankovski S.: LCA/LCC Model for Evaluation of Pump Units in Water Distribution Systems, Symmetry, 2019, Vol. 11, No 9, pp. 1-21, ISSN 2073-8994
() Research published in the prominent international journal
Jocanović M., Šević D., Karanović V., Beker I., Dudić S.: Increased Efficiency of Hydraulic Systems Through Reliability Theory and Monitoring of System Operating Parameters, Strojniški vestnik - Journal of Mechanical Engineering, 2012, Vol. 58, No 4, pp. 281-288, ISSN 0039-2480
() Research published in the international journal
Savić V., Knežević D., Lovrec D., Jocanović M., Karanović V., Determination of pressure losses in hydraulic pipeline systems by considering temperature and pressure, Journal of mechanical engineering Strojniški Vestnik, Vol. 55, No. 4, 2009, str. 237-243
() Research published in the international journal
Karanović V., Jocanović M., Jovanović V., Review of Development Stages in the Conceptual Design of an Electro-Hydrostatic Actuator for Robotics, Acta Polytechnica Hungarica, Vol. 11, No. 5, 2014, str. 59-79, DOI: 10.12700/APH.11.05.2014.05.4
() Research published in the international journal
Karanović V., Jocanović M., Baloš S., Knežević D.,Mačužić I.: Impact of contaminated fluid on the working performances of hydraulic directional control valves, Strojniški vestnik - Journal of Mechanical Engineering, 2019, Vol. 65, No 3, pp. 139-147, ISSN 0039-2480
() Research published in the international journal
Penčić M., Čavić M., Oros D., Čavić D., Orošnjak M., Karanović V.: High-Capacity Stacking Apparatus for Thermoforming Machine – Part II: Structural Design of the Adjustable Stacker Driving Mechanism, Advances in Mechanical Engineering, 2021, Vol. 13, No. 10, pp. 1-19, ISSN 1687-8140, UDK: DOI: 10.1177/16878140211052458
() Research published in the international journal
Orošnjak M., Jocanović M., Gvozdenac Urošević B., Šević D., Duđak Lj., Karanović V.: Bus Fleet Management: A Systematic Literature Review, Promet - Traffic and Transportation, 2020, Vol. 32, No. 6, pp. 761-772, ISSN 0353-5320
() Invited lectures from the international meeting printed in its entirety
Savić V., Karanović V., Jocanović M., Knežević D.: Pressure drop in hydraulic pipeline system - Identification of real basis for calculation of mineral hydraulic oil flow, Fluidna tehnika, 2009, Vol. 5, pp. 133-148, ISSN 0353-6114, 5. Fluid Power, Maribor: Mašinski fakultet univerziteta u Mariboru, 17-18 Septembar, 2009, pp. 133-148, ISBN 978-961-248-176-6, UDK: 621.51/.54(063)(082)
() Invited lectures from the international meeting printed in extracts
Jocanović M., Dušan B., Karanović V., Geaverts R.: Industrial Aplication of Automatic Lubrication Systems, 6. Fluid Power, Maribor: Univerzitet v Maribor, Fakultet za strojništvo, 15-16 Septembar, 2011, pp. 409-418, ISBN 978-961-248-290-9, UDK: 621.51/54 (082), 681.523 (082)
() Report from the international meeting printed in its entirety
Jovanović V., Đurić A., Karanović V., Stevanov B.: Applications of Electro-Hydraulics Actuators, 29. IEEE SoutheastCon, Norfolk: IEEE, 30-3 Mart, 2016, pp. 1-5, ISBN 978-1-5090-2246-5
() Report from the international meeting printed in its entirety
Orošnjak M., Jocanović M., Karanović V.: Quality Analysis of Hydraulic Systems in Function of Reliability Theory, 27. DAAAM International Symposium on Intelligent Manufacturing and Automation, Mostar, 26-29 Oktobar, 2016
() Report from the international meeting printed in its entirety
Orošnjak M., Jocanović M., Karanović V.: Simulating the effects that contamination has on a hydraulic system performance using MATLAB/SimHydraulics, 3. International Scientific Conference "Conference on Mechanical Engineering Technologies and Applications" - COMETa, Jahorina, 7-9 Decembar, 2016, pp. 457-464, ISBN 978-99976-623-7-8
() Report from the international meeting printed in its entirety
Jocanović M., Karanović V., Orošnjak M., Nikolić N., Knežević D.: Lubricating oils for modern automatic transmission of motor vehicles, 3. International Scientific Conference "Conference on Mechanical Engineering Technologies and Applications" - COMETa, Jahorina, 7-9 Decembar, 2016, pp. 451-456, ISBN 978-99976-623-7
() Report from the international meeting printed in its entirety
Karanović V., Jocanović M., Laloš S., Knežević B.: Oil Cleanliness Class Influence on Wear Intensity of Piston-Cylinder Contact Pair Inside of Hydraulic Distributional Valve, 12. International Conference on Accomplishments in Electrical and Mechanical Engineering and Information Technology - DEMI, Banja Luka: University of Banja Luka Faculty of Mechanical Engineering, Banja Luka, 29-30 Maj, 2015, pp. 193-198, ISBN 978-99938-39-53-8, UDK: 621.3(082), 621 (082), 004 (082), (0.034.2)
() Report from the international meeting printed in its entirety
Jocanović M., Karanović V., Knežević D., Orošnjak M.: Model for monitoring of the physical and chemical characteristics of the oil filling in hydraulic systems, 12. International Conference on Accomplishments in Electrical and Mechanical Engineering and Information Technology - DEMI, Banja Luka, 29-30 Maj, 2015
() Report from the international meeting printed in its entirety
Karanović V., Jocanović M., Delić M., Influence of solid particles as a contaminants on degradation processes in hydraulic components or systems, 16th International Scientific Conference on Industrial Systems, Novi Sad, Srbija, 15-17 oktobar 2014, str. 189-194, ISBN 978-86-7892-652-5
() Report from the international meeting printed in its entirety
Jocanović M., Savić V., Karanović V., Model for translation of classes of purity of oils between ISO 4406/99, NAS 1638-01 and SAE AS 4059 D standards, 14th International Scientific Conference on Industrial Systems, Novi Sad, Srbija, 2-3 oktobar 2008, str. 391-396, ISBN 978-86-7892-135-3
() Report from the international meeting printed in its entirety
Orošnjak M., Jocanović M., Karanović V., Wakiru J., Bugarić U.: Contamination control of hydraulic systems in Industry 4.0, 3. Maintenance Forum on Maintenance and Asset Management, Beograd, 24-26 Maj, 2018, pp. 52-60, ISBN 978-86-84231-43-9
() Report from the international meeting printed in its entirety
Karanović V., Jocanović M., Wakiru J., Orošnjak M.: Benefits of lubricant oil analysis for maintenance decision support: A case study, 10. Simpozijum o konstruisanju, oblikovanju i dizajnu – KOD, Novi Sad: Faculty of Technical Sciences, 6-8 Jun, 2018
() Report from the international meeting printed in its entirety
Wakiru J., Pintelon L., Karanović V., Jocanović M., Orošnjak M.: Analysis of lubrication oil towards maintenance grouping for multiple equipment using fuzzy cluster analysis, 10. Simpozijum o konstruisanju, oblikovanju i dizajnu – KOD, Novi Sad: Faculty of Technical Sciences, 6-8 Jun, 2018
() Report from the international meeting printed in its entirety
Karanović V., Jocanović M., Orošnjak M.: Active tribology systems, 15. International Conference on Tribology - SERBIATRIB, Kragujevac: University of Kragujevac, Faculty of Engineering and Serbian Tribology Society, 17-19 Maj, 2017, pp. 378-381, ISBN 978-86-6335-041-0, UDK: 621.89(082); 531.43(082); 66.017/018:539.375.6(082); 577.38(082); 612.766(082)
() Report from the international meeting printed in its entirety
Jocanović M., Karanović V., Knežević D., Orošnjak M., Laloš S.: SIGNIFICANCE OF HYDRAULIC SYSTEM WORKING FLUID MAINTENANCE WITH INTEGRATED LOGIC AND BUILT-IN COMPONENTS, 13. International Conference on Accomplishments in Mechanical and Industrial Engineering - DEMI, Banja Luka: University of Banja Luka, Faculty of Mechanical Engineering, 26-27 Maj, 2017, pp. 855-862, UDK: 621.3(082)(0.034.2); 621(082)(0.034.2); 004(082)(0.034.2)
() Report from the international meeting printed in its entirety
Orošnjak M., Peković T., Jocanović M., Karanović V., Novak Horvatić A.: Using contamination control in condition based maintenance of a hydraulic system, 42. Scientific Conference Maintenance of Machinery and Equipment - OMO, Budva, 24-27 Maj, 2017, pp. 102-111
() Report from the international meeting printed in its entirety
Orošnjak M., Karanović V., Horvatić Novak A., Peković T., Jocanović M.: Maintenance of a hydraulic system through oil monitoring and contamination control, 16. International Scientific Conference on Production Engineering - CIM, Zadar: Croatian Association of Production Engineering, 8-10 Jun, 2017, pp. 195-202, ISBN 2584-3214
() Report from the international meeting printed in its entirety
Karanović V., Jocanović M., Orošnjak M.: Condition Monitoring of Hydraulic Machinery by Oil Analysis, 8. PSU-UNS International Conference on Engineering and Technology - ICET, Novi Sad: University of Novi Sad, Faculty of Novi Sad, 8-10 Jun, 2017, ISBN 978-86-7892-934-2, UDK: 62(082)
() Report from the international meeting printed in its entirety
Jocanović M., Karanović V., Tič V., Orošnjak M., Selinić D.: Application of hydraulic and gear oils in the food processing industry, Fluidna tehnika, 2017, Vol. 2, pp. 111-119, ISSN 0353-6114, 3. Fluid Power, Maribor: University of Maribor, Faculty of Mechanical Engineering, 14-15 Septembar, 2017, pp. 111-119, ISBN 978-961-286-085-8.11, UDK: 621.22(082)
() Report from the international meeting printed in its entirety
Orošnjak M., Jocanović M., Karanović V.: Simulation and Modeling of a Hydraulic System in FluidSim, 17. International Scientific Conference on Industrial Systems, Novi Sad: University of Novi Sad, Faculty of Technical Sciences, Department for Industrial Engineering and Management, 4-6 Oktobar, 2017, pp. 50-53, ISBN ISBN 978-86-7892-978, UDK: 658.5(082)
() Report from the international meeting printed in its entirety
Orošnjak M., Jocanović M., Karanović V.: Quality Analysis of Hydraulic Systems in Function of Reliability Theory, 27. DAAAM International Symposium on Intelligent Manufacturing and Automation, Mostar: Danube Adria Association for Automation and Manufacturing, DAAAM, 26-29 Oktobar, 2016, pp. 569-577, ISBN 17269679, UDK: DOI: 10.2507/27th.daaam.proceedings.084
() Report from the international meeting printed in its entirety
Jocanović M., Karanović V., Orošnjak M., Nikolić N., Knežević D.: Lubricating oils for modern automatic transmission of motor vehicles, 3. International Scientific Conference "Conference on Mechanical Engineering Technologies and Applications" - COMETa, Jahorina: University of East Sarajevo, Faculty of Mechanical Engineering - East Sarajevo, 7-9 Decembar, 2016, pp. 451-456, ISBN 978-99976-623-7
() Report from the international meeting printed in its entirety
Karanović V., Jocanović M.: Oil Cleanliness Class Influence on Wear Intensity of Piston-Cylinder Contact Pair Inside of Hydraulic Distributional Valve, 12. International Conference on Accomplishments in Electrical and Mechanical Engineering and Information Technology - DEMI, Banja Luka, 29-30 Maj, 2015, pp. 193-198, ISBN 978-99938-39-53-8, UDK: 621.3(082), 621 (082), 004 (082), (0.034.2)
() Report from the international meeting printed in its entirety
Jocanović M., Karanović V., Knežević D., Orošnjak M.: Model for monitoring of the physical and chemical characteristics of the oil filling in hydraulic systems, 12. International Conference on Accomplishments in Electrical and Mechanical Engineering and Information Technology - DEMI, Banja Luka: Univesity of Banja Luka, Faculty of Mechanical Engineering - Banja Luka, 29-30 Maj, 2015, pp. 837-842, ISBN ISBN 978-99938-39-53, UDK: 621.3(082)(0.034.2); 621(082)(0.034.2); 004(082)(0.034.2)
() Report from the international meeting printed in its entirety
Jocanović M., Karanović V., Veličković M.: DidacticEquipment for Education of Students in Automated Hydraulic Systems, 6. International Symposium on Industrial Engineering (SIE), Beograd: Faculty of Mechanical Engineering, Belgrade, 24-25 Septembar, 2015, pp. 114-117, ISBN 978-86-7083-864-2, UDK: 005.22(082), 658.5(082), 006.83:338.45(082)
() Report from the international meeting printed in its entirety
Jocanović M., Karanović V., Kraišnik M.: SOLID CONTAMINANTS IN HYDRAULIC OIL AND THEIR IMPACT ON THE INTENSITY OF WEAR AND TEAR OF WORKING ELEMENTS IN DIRECTIONAL VALVES , 2. International Scientific Conference "Conference on Mechanical Engineering Technologies and Applications" - COMETa, Jahorina: University of East Sarajevo, Faculty of Mechanical Engineering, 2-5 Decembar, 2014, pp. 195-202, ISBN 978-99976-623-1-6, UDK: 621.03(082)
() Report from the international meeting printed in its entirety
Karanović V., Jocanović M., Knežević D., Kaišnik M.: Development of Electro-hydraulic Actuator for Robots, 1. International Scientific Conference "Conference on Mechanical Engineering Technologies and Applications" - COMETa, Istočno Sarajevo: University of East Sarajevo, Faculty of Mechanical Engineering, 28-30 Novembar, 2012, pp. 447-456, ISBN 978-99938-655-5-1, UDK: 621.03(082)
() Report from the international meeting printed in its entirety
Jocanović M., Karanović V., Vukelić Đ., Knežević D., Kraišnik M.: Diagnostic Equipment for Examination Phisical and Chemical Characteristics of UTTO, Stoutractor Oils, 1. International Scientific Conference "Conference on Mechanical Engineering Technologies and Applications" - COMETa, Istočno Sarajevo: University of East Sarajevo, Faculty of Mechanical Engineering, 28-30 Novembar, 2012, pp. 631-640, ISBN 978-99938-655-5-1, UDK: 621.03(082)
() Report from the international meeting printed in its entirety
Savić V., Jocanović M., Karanović V.: Osnovni konstrukcioni model sistema za zaštitu voćki od mraza ledenom opnom, 14. Internacionalna naučna konferencija Industrijski Sistemi - IS, Novi Sad: Fakultet tehničkih nauka univerziteta u Novom Sadu, 2-3 Oktobar, 2008, pp. 129-134, ISBN 978-86-7892-135-3
() Report from the international meeting printed in its entirety
Jocanović M., Savić V., Karanović V.: MODEL PRERAČUNAVANJA KLASA ČISTOĆE ULJA IZMEĐU ISO 4406/99, NAS 1638-01 I SAE AS4059:D STANDARDA , 14. Internacionalna naučna konferencija Industrijski Sistemi - IS, Novi Sad: Fakultet tehničkih nauka - Novi Sad, 2-3 Oktobar, 2008, pp. 391-396, ISBN 978-86-7892-135-3, UDK: 685.5(082)
() Monographic bibliographic publication
Jocanović M., Karanović V.: Procesi i sredstva rada, Novi Sad, Univerzitet u Novom Sadu, Fakultet tehničkih nauka, 2017, str. 1-285, ISBN 978-86-7892-943-4, UDK: 66.02/.09:66.017/.018(075.8)
() Research published in the leading journal of the national importance
Jocanović M., Karanović V., Knežević D., Orošnjak M.: Diesel fuel filtration problems with modern common rail injection systems, Vojnotehnički glasnik, 2017, Vol. 4, No 65, pp. 968-993, ISSN 0042-8469, UDK: 623+355 / 359 355 / 359
() Research published in the leading journal of the national importance
Knežević D., Laloš S., Jocanović M., Karanović V.: Effect of Bulk Modulus of Fluid on the Dynamic Behavior of the Hydraulic System, Annals of Faculty Engineering Hunedoara - International Journal of Engineering, 2016, Vol. 14, No 1, pp. 243-246, ISSN 1584-2665
() Research published in the leading journal of the national importance
Jocanović M., Karanović V., Knežević D.: Application of Gear Oils in Food Processing Industry, Acta Technica Corviniensis, 2013, Vol. 1, No 7, pp. 171-174, ISSN 2067-3809
() Research published in the journal of the national importance
Jocanović M., Karanović V., Ivanišević A., Knežević D., Otkaz hidrauličkog sistema čekića kao posledica kontaminacije čvrstim česticama, Vojnotehnički glasnik, Vol. 62, No. 1, 2014, str. 112-129, ISSN 0042-8469
() Research published in the journal of the national importance
Karanović V., Jocanović M., Delić M.: Influence of solid particles as a contaminants on degradation processes in hydraulic components or systems, International Journal of Industrial Engineering and Management, 2015, Vol. 6, No 1, pp. 15-20, ISSN 2217-2661, UDK: -
() Research published in the scientific journal
Jocanović M., Karanović V., Knežević D.: Application of Gear Oils in Food Processing Industry, Acta Technica Corviniensis, 2014, Vol. 1, No 7, pp. 171-174, ISSN 2067-3809
() Research published in the scientific journal
Knežević D., Laloš S., Jocanović M., Karanović V.: Effect of Bulk Modulus of Fluid on the Dynamic Behavior of the Hydraulic System, Annals of Faculty Engineering Hunedoara - International Journal of Engineering, 2016, Vol. 14, No 1, pp. 243-246, ISSN 1584-2665
() Research published in the scientific journal
Orošnjak M., Jocanović M., Karanović V., Vekić A., Medić N.: Transformation from mass production to mass customization in SCM: Obstacles and advantages, Acta Technica Corviniensis, 2017, Vol. 10, No 1, pp. 29-33, ISSN 2067-3809, UDK: http://acta.fih.upt.ro/pdf/2017-1/ACTA-2017-1-03
() Research published in the scientific journal
Karanović V., Jocanović M., Nikolić N., Lubich M., Orošnjak M.: Lubricating Oils for Automotive Natural Gas Engines, Annals of Faculty Engineering Hunedoara - International Journal of Engineering, 2018, Vol. 16, No 1, pp. 153-157, ISSN 1584-2665
() Report from the meeting of the national importance printed in its entirety
Jocanović M., Karanović V.: Prilog istraživanju kriterijuma za definisanje potrebnog stepena čistoće hidrauličnih fluida u skladu sa zahtevima hidrauličnih komponenti i sistema, 8. Međunarodni naučno-stručni skup o dostignućima elektrotehnike, mašinstva i informatike - DEMI, Banja Luka: Mašinski fakultet univerziteta u Banja Luci, 25-26 Maj, 2007, pp. 869-876, ISBN 978-99938-39-15-6, UDK: 621.5(082)
() Report from the meeting of the national importance printed in its entirety
Jocanović M., Savić V., Karanović V., Kraišnik M.: Proračun promene broja čestica u uljnoj masi hidrauličnog sistema kod izdvajanja sekundarnim filterom , 31. Kongres o hidropneumatičkoj automatizaciji - HIPNEF, Vrnjačka Banja: Mašinski fakultet - Niš, 15-17 Oktobar, 2008, pp. 49-54, ISBN 978-86-80587-87-5, UDK: 621.5/.6(082), 681.5(082)
() Report from the meeting of the national importance printed in its entirety
Karanović V., Savić V., Jocanović M., Kovač O., Knežević D.: Istraživanje uticaja temperature na pad pritiska kod proticanja ulja kroz ravne cevovode hidrauličkog sistema pri konstantnom pritisku, 31. Kongres o hidropneumatičkoj automatizaciji - HIPNEF, Vrnjačka Banja: Mašinski fakultet u Nišu, 15-17 Oktobar, 2008, pp. 43-48, ISBN 978-86-80587-87-5, UDK: 621.5/.6(082),681.5(082)
() Report from the meeting of the national importance printed in its entirety
Karanović V., Šešlija D.: Analiza potrošnje vazduha pod pritiskom manipulatora za postavljanje nalepnica, 32. Kongres o hidropneumatičkoj automatizaciji - HIPNEF, Vrnjačka Banja: Mašinski fakultet u Nišu, 14-16 Oktobar, 2009, pp. 113-118, ISBN 978-86-81505-48-9
() Report from the meeting of the national importance printed in its entirety
Jocanović M., Karanović V.: OSETLJIVOST HIDRAULIČNIH KOMPONENATA NA KONTAMINANTE, 9. Međunarodna konferencija o dostignućima elektrotehnike, mašinstva i informatike - DEMI, Banja Luka: Mašinski fakultet Banja Luka, 28-29 Maj, 2009, ISBN 978-99938-39-23-1, UDK: 621(082)
() Report from the meeting of the national importance printed in its entirety
Savić V., Jocanović M., Karanović V., Ivanišević A., Mitrović Veljković S.: Tehno ekonomski parametri za optimizaciju konstrukcije ANTI-FROST sistema za zaštitu voćki od mraza, 9. Međunarodna konferencija o dostignućima elektrotehnike, mašinstva i informatike - DEMI, Banja Luka: Mašinski fakultet u Banja Luci, 28-29 Maj, 2009, pp. 161-166, ISBN 978-99938-39-23-1, UDK: 621(082)
() Report from the meeting of the national importance printed in extracts
Savić V., Keserović Z., Jocanović M., Karanović V.: Polazni pristup Optimiranju antifrost sistema u voćarstvu, 13. Kongres voćara i vinogradara, Novi Sad: Poljoprivredni fakultet u Novom Sadu, 27-30 Oktobar, 2008, pp. 49-49
() Defended Doctoral dissertation
Karanović V.: Razvoj modela uticaja čvrstih čestica na rad kontaktnih parova klip-cilindar hidrauličkih komponenti, Novi Sad, FTN, 2015
() Significantly improved existing product or technology
Jocanović M., Karanović V., Stankovski S.: Konstrukcija hidrauličnog diferencijaklnog pojačivača pritiska za pogon hidraulične prese FC-100T, 2017
() Prototype, new methods, software, standardized and certified instrument
Lukić D., Jocanović M., Milošević M., Karanović V., Vukman J., Koledin S.: Programsko rešenje za unapređenje tehničke pripreme proizvodnje hidrauličnih cilindara, 2018
