VERIFIKACIJA MODULACIONIH STRATEGIJA MAŠINA SA OTVORENIM KRAJEVIMA NAMOTAJA PRIMENOM FPGA I HIL UREĐAJA
Ključne reči:
Modulacione strategije, Mašina sa otvorenim krajevima namotaja, FPGA, HIL
Apstrakt
U radu su prezentovani rezultati verifikacije raspregnutih modulacionih strategija za upravljanje dva invertora koji ostvaruju dva nivoa izlaznog napona i napajaju mašinu sa otvorenim krajevima namotaja. Prvo je data teorijska analiza i način implementacije predloženih modulacionih strategija. Zatim je vršena eksperimentalna verifikacija prezentovanih modulacionih strategija. Eksperimentalna verifikacija je vršena pomoću FPGA i HIL uređaja.
Reference
[1] E.G. Shivakumar ; K. Gopakumar ; S.K. Sinha ; A. Pittet ; V.T. Ranganathan, “Space vector PWM control of dual inverter fed open-end winding induction motor drive”, Sixteenth Annual IEEE Applied Power Electronics Conference and Exposition, APEC 2001.
[2] Barry Venugopal Reddy ; Veeramraju Timurala Somasekhar ; Yenduri Kalyan, “ Decoupled Space-Vector PWM Strategies for a Four-Level Asymmetrical Open-End Winding Induction Motor Drive With Waveform Symmetries ”, IEEE Transactions on Industrial Electronics, Volume: 58 , Issue: 11, Nov. 2011.
[3] Darijevic, M., “Modulation and control strategies for multilevel five-phase open-end winding drives”, PhD. thesis, Liverpool John Moores University, 2016
[4] Gopal Mondal, K. Gopakumar, P. N. Tekwani, Emil Levi, “A Reduced-Switch-Count Five-Level Inverter With Common-Mode Voltage Elimination for an Open-End Winding Induction Motor Drive” IEEE Transactions on Industrial Electronics, Volume: 54 , Issue: 4 , Aug. 2007
[5] Concettina Buccella, Carlo Cecati, Hamed Latafat, “Digital Control of Power Converters—A Survey”, IEEE Transactions on Industrial Informatics, Volume: 8, Issue: 3, Aug. 2012
[6] Eric Monmasson, Lahoucine Idkhajine, Mohamed Wissem Naouar “FPGA-based Controllers”, IEEE Industrial Electronics Magazine, Volume: 5 , Issue: 1 , March 2011
[7] E. Monmasson, L. Idkhajine, I. Bahri, M-W- Naouar, L. Charaabi, “Design methodology and FPGA-based controllers for Power Electronics and drive applications”, 2010 5th IEEE Conference on Industrial Electronics and Applications, 15-17 June 2010
[8] Simon Abourida, Christian Dufour, Jean Bélanger, “Hardware-In-the-Loop Simulation of Power Drives with RT-LAB”, Power Electronics and Drives Systems, International Conference on, Volume: 2, 2005
[9] Bodo, N., “PWM strategies for open-end winding multiphase drives”, PhD. thesis, Liverpool John Moores University, 2013
[2] Barry Venugopal Reddy ; Veeramraju Timurala Somasekhar ; Yenduri Kalyan, “ Decoupled Space-Vector PWM Strategies for a Four-Level Asymmetrical Open-End Winding Induction Motor Drive With Waveform Symmetries ”, IEEE Transactions on Industrial Electronics, Volume: 58 , Issue: 11, Nov. 2011.
[3] Darijevic, M., “Modulation and control strategies for multilevel five-phase open-end winding drives”, PhD. thesis, Liverpool John Moores University, 2016
[4] Gopal Mondal, K. Gopakumar, P. N. Tekwani, Emil Levi, “A Reduced-Switch-Count Five-Level Inverter With Common-Mode Voltage Elimination for an Open-End Winding Induction Motor Drive” IEEE Transactions on Industrial Electronics, Volume: 54 , Issue: 4 , Aug. 2007
[5] Concettina Buccella, Carlo Cecati, Hamed Latafat, “Digital Control of Power Converters—A Survey”, IEEE Transactions on Industrial Informatics, Volume: 8, Issue: 3, Aug. 2012
[6] Eric Monmasson, Lahoucine Idkhajine, Mohamed Wissem Naouar “FPGA-based Controllers”, IEEE Industrial Electronics Magazine, Volume: 5 , Issue: 1 , March 2011
[7] E. Monmasson, L. Idkhajine, I. Bahri, M-W- Naouar, L. Charaabi, “Design methodology and FPGA-based controllers for Power Electronics and drive applications”, 2010 5th IEEE Conference on Industrial Electronics and Applications, 15-17 June 2010
[8] Simon Abourida, Christian Dufour, Jean Bélanger, “Hardware-In-the-Loop Simulation of Power Drives with RT-LAB”, Power Electronics and Drives Systems, International Conference on, Volume: 2, 2005
[9] Bodo, N., “PWM strategies for open-end winding multiphase drives”, PhD. thesis, Liverpool John Moores University, 2013
Objavljeno
2020-10-30
Sekcija
Elektrotehničko i računarsko inženjerstvo