() Research published in the top international journal
Šiđanin (Sidjanin) L., Kovač P.: Fracture mechanisms in chip formation processes, Materials Science and Technology, 1997, Vol. 13, pp. 439-444, ISSN 0267-0836
() Research published in the prominent international journal
Golubović D., Kovač P., Ješić D., Gostimirović M., Pucovski (Pucovsky) V.: Wear Intensity of Diffrent Heat Treated Nodular Iron, Metalurgija, 2012, Vol. 51, No 4, pp. 518-520, ISSN 0543-5846, UDK: 669.13:620.178.1:621.78=111
() Research published in the prominent international journal
Gostimirović M., Kovač P., Ješić D., Škorić B., Savković B.: Surface layer properties of the workpiece material in high performance grinding, Metalurgija, 2012, Vol. 51, No 1, pp. 105-108, ISSN 0543-5846, UDK: 621.7:621.923:621.795:536.5=111
() Research published in the prominent international journal
Kovač P., Šiđanin (Sidjanin) L., Rajnović D., Savković B., Wannasin J.: The microstructure influence on the chip formation process of Al-Cu alloy cast conventionally and in semi solid state, Metalurgija, 2012, Vol. 51, No 1, pp. 34-38, ISSN 0543-5846, UDK: 669.715:621.96.621.773:620.18=111
() Research published in the prominent international journal
Kovač P., Rodić D., Pucovski (Pucovsky) V., Savković B., Gostimirović M.: Application of Fuzzy Logic and Regression Analysis for Modeling Surface Roughness in Face Milliing, Journal of Intelligent Manufacturing, 2013, Vol. 24, No 4, pp. 755-762, ISSN 0956-5515, UDK: DOI 10.1007/s10845-012-0623-z
() Research published in the prominent international journal
Kovač P., Rodić D., Pucovski (Pucovsky) V., Savković B., Gostimirović M.: Multi-output fuzzy inference system for modeling cutting temperature and tool life in face milling, Journal of Mechanical Science and Technology, 2014, Vol. 28, No 10, pp. 4247-4256, ISSN 1738-494X, UDK: DOI 10.1007/s12206-014-0938-0
() Research published in the international journal
Kovač P., Šiđanin (Sidjanin) L.: Investigation of Chip Formation During Milling , International Journal of Production Economics, 1997, Vol. 51, pp. 149-153, ISSN 0925-5273
() Research published in the international journal
Gostimirović M., Kovač P., Sekulić M.: An inverse heat transfer problem for optimization of the thermal process in machining, Sadhana - Academy Proceedings in Engineering Science, 2011, Vol. 36, No 4, pp. 489-504, ISSN 0256-2499
() Research published in the international journal
Gostimirović M., Sekulić M., Kopač J., Kovač P.: Optimal Control of Workpiece Thermal State in Creep-Feed Grinding Using Inverse Heat Conduction Analysis, Strojniski vestnik - Journal of Mechanical Engineering, 2011, Vol. 57, No 10, pp. 730-738, ISSN 0039-2480
() Research published in the international journal
Gostimirović M., Kovač P., Škorić B., Sekulić M.: Effect of Electrical Pulse Parameters on the Machining Performance of EDM, Indian Journal of Engineering and Materials Sciences, 2011, Vol. 18, No 6, pp. 411-415, ISSN 0971-4588
() Research published in the international journal
Vrač D., Šiđanin (Sidjanin) L., Kovač P., Baloš S.: The influence of hohning process parameters on surface quality, productivity, cutting angle and coefficients of friction, Industrial Lubrication and Tribology, 2012, Vol. 64, No 2, pp. 77-83, ISSN 0036-8792
() Research published in the international journal
Nagy L., Palkova Z., Valicek J., Kiedrowicz M., Rokosz K., Kovač P.: Identification of Model Lightening System and Design of PID Controllers for the Purpose of Energy Savings by Using of MATLAB and Their Functionality in LabVIEW (Article), Rocznik Ochrona Srodowiska, 2012, Vol. 14, pp. 247-261, ISSN 1506-218X
() Research published in the international journal
Sovilj-Nikić I., Sovilj B., Kandeva M., Gajic V., Sovilj-Nikic S., Legutko S., Kovač P.: Tribological Characteristics of Hob Milling Tools from Economical Aspects, Journal of the Balkan Tribological Association, 2012, Vol. 18, No 4, pp. 577-585, ISSN 1310-4772
() Research published in the international journal
Golubovic D., Kovač P., Jesic D., Gostimirović M.: Tribological properties of ADI material, Journal of the Balkan Tribological Association, 2012, Vol. 18, No 2, pp. 165-173, ISSN 1310-4772
() Research published in the international journal
Gostimirović M., Kovač P., Sekulić M., Škorić B.: Influence of discharge energy on machining characteristics in EDM, Journal of Mechanical Science and Technology, 2012, Vol. 26, No 1, pp. 173-179, ISSN 1738-494X
() Research published in the international journal
Šooš L., Ondruška J., Biath P., Kovač P.: Development of Modular Flood Barrier Concept Made From Recycled Plastic, Chemicke Listy, 2013, Vol. 107, pp. 94-96, ISSN 0009-2770
() Research published in the international journal
Golubović B., Kovač P., Golubović D., Ješić D.: Optimum Solutions of the Municipal Wastewater Mechanical Treatment System for Medium-sized and Smaller Settlements on the Adriatic Coast, Journal of the Balkan Tribological Association, 2013, Vol. 19, No 3, ISSN 1310-4772
() Research published in the international journal
Kovač P., Pucovski (Pucovsky) V., Gostimirović M., Savković B., Rodić D.: INFLUENCE OF DATA QUANTITY ON ACCURACY OF PREDICTIONS IN MODELING TOOL LIFE BY THE USE OF GENETIC ALGORITHMS, International Journal of Industrial Engineering: Theory, Applications and Practice, 2014, Vol. 21, No 2, pp. 14-21, ISSN 1943-670X
() Research published in the international journal
Golubovic D., Kovač P., Savković B., Jesic D., Gostimirović M.: Testing the tribological characteristics of nodular cast iron austempered by a conventional and an isothermal procedure, Materiali in Tehnologije, 2014, Vol. 48, No 2, pp. 293-298, ISSN 1580-2949, UDK: 669.131.6:531.43:620.178.1
() Research published in the international journal
Vrač D., Šiđanin (Sidjanin) L., Baloš S., Kovač P.: The influence of tool kinematics on surface texture, productivity, power and torque of normal honing, Industrial Lubrication and Tribology, 2014, Vol. 66, No 2, pp. 215-222, ISSN 0036-8792
() Research published in the international journal
Simic S., Golubović D., Savković B., Kovač P., Ješić D.: MONITORING OF WOOD BRIQUETTES COMBUSTION PARAMETERS DEPENDING ON SHARE WASTE MATERIALS OBTAINED FROM REFINING PROCESS OF BASE OILS AND PARAFFIN, Oxidation Communication, 2016, Vol. 39, No 4, pp. 3291-3304, ISSN 0209-4541
() Research published in the international journal
Kovač P., Petrović V., Pucovski (Pucovsky) V., Birčanin B., Savković B., Gostimirović M.: ENERGY EFFICIENCY CART MODELING OF SOLAR ENERGY COLLECTORS BY GENETIC PROGRAMMING, Thermal Science, 2016, Vol. 20, No S2, pp. 471-479, ISSN 0354-9836
() Research published in the journal of the international importance verified by the special resolution
Kovač P., Rodić D., Savković B., Pucovski (Pucovsky) V., Gostimirović M.: Modelling Tool Wear in Avoiding the Risk of Breakage by Using Fuzzy Logic, Integritet i vek konstrukcija, 2015, Vol. 15, No 2, pp. 103-109, ISSN 1451-3749, UDK: 621
() Invited lectures from the international meeting printed in its entirety
Kovač P., Pucovski (Pucovsky) V., Gostimirović M., Savković B., Šoos Lj., Ješić D.: Cutting force during grinding determined by regression analysis and genetic algorithms, 8. International Congress on Precision Machining - ICPM, Novi Sad: Faculty of Technical Sciences, University of Novi Sad, 1-3 Oktobar, 2015, pp. 13-18, ISBN 978-86-7892-742-3
() Invited lectures from the international meeting printed in its entirety
Gostimirović M., Pucovski (Pucovsky) V., Kovač P., Sekulić M., Savković B.: An analytical study of energy partition in grinding - Invited paper, 8. International Congress on Precision Machining - ICPM, Novi Sad: Faculty of Technical Sciences, University of Novi Sad, 1-3 Oktobar, 2015, pp. 81-86, ISBN 978-86-7892-742-3
() Invited lectures from the international meeting printed in its entirety
Sekulić M., Djurica D., Kovač P., Gostimirović M., Kramar D.: Using advanced CAM system in modern machining, 8. International Congress on Precision Machining - ICPM, Novi Sad: Faculty of Technical Sciences, University of Novi Sad, 1-3 Oktobar, 2015, pp. 27-32, ISBN 978-86-7892-742-3
() Invited lectures from the international meeting printed in its entirety
Gostimirović M., Rodić D., Kovač P., Jesić D., Kulundzic N.: AN EXPERIMENTAL STUDY OF THE CUTTING FORCES IN CREEP-FEED GRINDING - Invited paper, 12. International Scientific Conference "Flexible Technologies" - MMA, Andrevlje: Faculty of Technical Sciences, 25-26 Septembar, 2015, pp. 21-24, ISBN 978-86-7892-722-5
() Invited lectures from the international meeting printed in its entirety
Kramar D., Sekulić M., Kovač P., Gostimirović M., Kopač J.: The Implementation of Taguchi Method for Quality Improvement in High-Pressure Jet Assisted Turning Process, 11. International Scientific Conference "Advanced Production Technologies" - MMA, Novi Sad: Fakultet tehničkih nauka, 20-21 Septembar, 2012, pp. 37-40, ISBN ISBN 978-86-7892-419
() Invited lectures from the international meeting printed in its entirety
Kovač P., Gostimirović M., Sekulić M., Savković B.: Main developments in cutting technology-Keynote Paper, 10. International Scientific Conference "Flexible Technologies" - MMA, Novi Sad: Faculty of Technical Sciences, 9-10 Oktobar, 2009, pp. 13-21, ISBN 978-86-7892-223-7
() Invited lectures from the international meeting printed in its entirety
Kovač P., Gostimirović M., Sekulić M., Savković B.: Modeling and simulation of cutting process-Invited Paper, 10. International Scientific Conference "Flexible Technologies" - MMA, Novi Sad: Faculty of Technical Sciences, 9-10 Oktobar, 2009, pp. 22-27, ISBN 978-86-7892-223-7
() Monograph of the national importance, monographic edition,
Kovač P.: Modeliranje procesa obrade-faktorni planovi eksperimenta, Fakultet tehničkih nauka, Novi Sad, 2006
() Defended Doctoral dissertation
Kovač P.: Istraživanje podloga za upravljanje procesom čeonog glodanja, Doktorska disertacija , Novi Sad, Univerzitet u Novom Sadu, Fakultet tehničkih nauka, 1987
() Defended Magister thesis
Kovač P.: Hrapavost obrađene površine u funkciji parametara rezanja pri završnoj obradi na strugu , Novi Sad, Univerzitet u Novom Sadu, Fakultet tehničkih nauka, 1980
() Prototype, new methods, software, standardized and certified instrument
Kovač P., Gostimirović M., Sekulić M., Savković B.: Programsko i tehničko rešenje virtualne instrumentacije za merenje otpora rezanja pri bušenju, 2010
() Prototype, new methods, software, standardized and certified instrument
Kovač P., Gostimirović M., Sekulić M., Savković B.: Programsko i tehničko rešenje virtualne instrumentacije za merenje otpora rezanja pri čeonom glodanju, 2010
() Prototype, new methods, software, standardized and certified instrument
Kovač P., Ješić D., Gostimirović M., Sekulić M., Pucovski (Pucovsky) V.: Uređaj za ispitivanje otpornosti na abraziju po metodi suv pesak i gumeni točak, 2015
() Prototype, new methods, software, standardized and certified instrument
Kovač P., Ješić D., Gostimirović M., Savković B., Rodić D.: Uređaj za tribološko ispitivanje kliznih ležajeva od metalnih materijala, polimera i kompozita, 2015
() Basic textbook for the course
Pavel Kovač, Zuzana Palkova, Proizvodno mašinstvo i obnovljivi izvori energije, FTN Novi Sad 2015
() Basic textbook for the course
Kovač P., Teorija obradnih procesa, Univerzitet u Novom Sadu, 2014
() Basic textbook for the course
Kovač P., Milikić D.,Gostimirović M.,Sekulić M., Savkovic.,B.: Zbirka zadataka iz tehnologije obrade rezanjem , Fakultet tehničkih nauka, Novi Sad, 2011.
() Basic textbook for the course
Kovač Pavel, Metode planiranja i obrade eksperimenata, FTN Novi Sad, 2011
() Monograph of the national importance, monographic edition,
Kovač P. : Podloge za upravljanje procesom čeonog glodanja, FTN, IPM, Novi Sad, 1988
() Basic textbook for the course
Kovač P.: Teorija obradnih procesa -praktikum za vežbe, Fakultet tehničkih nauka , Novi Sad, 2007
