() Research published in the top international journal
Rodić D., Sekulić M., Gostimirović M., Pucovsky V., Kramar D.: Fuzzy logic and sub-clustering approaches to predict main cutting force in high-pressure jet assisted turning, Journal of Intelligent Manufacturing, 2020., https://doi.org/10.1007/s10845-020-01555-4
() Research published in the top international journal
Rodić D., Gostimirović M., Madić M., Sekulić M., Aleksić A.: Fuzzy model-based optimal energy control during the electrical discharge machining, Neural computing and applications, 2020., https://doi.org/10.1007/s00521-020-04909-4
() Research published in the prominent international journal
Gostimirović M., Pucovsky V., Sekulic M., Rodić D., Pejić V.: Evolutionary optimization of jet lag in the abrasive water jet machining, International Journal of Advanced Manufacturing Technology, Vol. 101, No. 9-12, 2019., pp. 3131-3141
() Research published in the prominent international journal
Gostimirović M., Pucovski (Pucovsky) V., Sekulić M., Radovanović M., Madić M.: Evolutionary multi-objective optimization of energy efficiency in electrical discharge machining, Journal of Mechanical Science and Technology, 2018, Vol. 32, No 10, pp. 4775-4785, ISSN 1738-494X
() Research published in the prominent international journal
Hadžistević M., Štrbac B., Spasić Jokić V., Delić M., Sekulić M., Hodolič J.: Factors of estimating flatness error as a surface requirement of exploitation , Metalurgija, 2015, Vol. 54, No 1, pp. 239-242, ISSN 0543-5846
() Research published in the prominent international journal
Kramar D., Sekulić M., Jurković Z., Kopač J.: The Machinability of Nickel-Based Alloys in High-Pressure Jet Assisted (HPJA) Turning, Metalurgija, 2013, Vol. 52, No 4, pp. 512-514, ISSN 0543-5846, UDK: 669.24:621.914:621.9.011=111
() Research published in the prominent international journal
Gostimirović M., Kovač P., Sekulić M., Škorić B.: Influence of discharge energy on machining characteristics in EDM, Journal of Mechanical Science and Technology, 2012, Vol. 26, No 1, pp. 173-179, ISSN 1738-494X
() Research published in the prominent international journal
Cukor G., Jurković Z., Sekulić M.: Rotatable Central Composite Design of Experiments versus Taguchi Method in the Optimization of Turning, Metalurgija, 2011, Vol. 50, No 1, pp. 17-20, ISSN 0543-5846
() Research published in the prominent international journal
Sekulić M., Jurković Z., Hadžistević M., Gostimirović M.: The influence of mechanical properties of workpiece material on the main cutting force in face milling, Metalurgija, 2010, Vol. 49, No 4, pp. 339-342, ISSN 0543-5846, UDK: 669.14/15:620.171.70/178:620.18 = 111
() Research published in the international journal
Gostimirović M., Kovač P., Sekulić M.: An inverse optimal control problem in the electrical discharge machining, Sadhana - Academy Proceedings in Engineering Science, 2018, Vol. 43, No 5, pp. 1-10, ISSN 0256-2499
() Research published in the international journal
Sekulić M., Pejić V., Brezočnik M., Gostimirović M., Hadžistević M.: Prediction of surface roughness in the ball-end milling process using Response Surface Methodology, Genetic Algorithms, and Grey Wolf Optimizer Algorithm, Advances in Production Engineering and Management, 2018, Vol. 13, No 1, pp. 18-30, ISSN 1854-6250
() Research published in the international journal
Nemedi I., Sekulić M., Radlovački V., Hodolič J., Hadžistević M., Takacs M.: A Method for Determining Roundness and Actual Form of Circular Workpiece Cross Sections, Acta Polytechnica Hungarica, Journal of Applied Sciences, 2017, Vol. 14, No 6, pp. 169-184, ISSN 1785-8860
() Research published in the international journal
Vaštag Đ., Apostolov S., Hadžistević M., Sekulić M.: The Possibility of Copper Corrosion Protection in Acidic Media Using a Thiazole Derivative, Materijali in tehnologije, 2013, Vol. 47, No 3, pp. 329-333, ISSN 1580-2949, UDK: 620.197.3:669.3
() Research published in the international journal
Sekulić M., Hadžistević M., Gostimirović M., Turisova R., Pejić V.: Influence of material properties on machinability in face milling , Materijali in tehnologije, 2012, Vol. 46, No 6, pp. 601-606, ISSN 1580-2949, UDK: 621.937
() Research published in the international journal
Gostimirović M., Sekulić M., Kopač J., Kovač P.: Optimal Control of Workpiece Thermal State in Creep-Feed Grinding Using Inverse Heat Conduction Analysis, Strojniski vestnik - Journal of Mechanical Engineering, 2011, Vol. 57, No 10, pp. 730-738, ISSN 0039-2480
() Research published in the international journal
Gostimirović M., Kovač P., Sekulić M.: An inverse heat transfer problem for optimization of the thermal process in machining, Indian Academy of Sciences, Sadhana - Academy Proceedings in Engineering Science, 2011, Vol. 36, No 4, pp. 489-504, ISSN 0256-2499
() Research published in the international journal
Gostimirović M., Kovač P., Škorić B., Sekulić M.: Effect of Electrical Pulse Parameters on the Machining Performance of EDM, Indian Journal of Engineering and Materials Sciences, 2011, Vol. 18, No 6, pp. 411-415, ISSN 0971-4588
() Invited lectures from the international meeting printed in its entirety
Gostimirović M., Pucovski (Pucovsky) V., Kovač P., Sekulić M., Savković B.: An analytical study of energy partition in grinding - Invited paper, 8. International Congress on Precision Machining - ICPM, Novi Sad: Faculty of Technical Sciences, University of Novi Sad, 1-3 Oktobar, 2015, pp. 81-86, ISBN 978-86-7892-742-3
() Invited lectures from the international meeting printed in its entirety
Sekulić M., Djurica D., Kovač P., Gostimirović M., Kramar D.: Using advanced CAM system in modern machining, 8. International Congress on Precision Machining - ICPM, Novi Sad: Faculty of Technical Sciences, University of Novi Sad, 1-3 Oktobar, 2015, pp. 27-32, ISBN 978-86-7892-742-3
() Invited lectures from the international meeting printed in its entirety
Muženič D., Kramar D., Sekulić M., Gostimirović M., Kopač J.: Hybrid Manufacturing; Cutting Processes with Laser Assistance - Invited paper, 12. International Scientific Conference "Flexible Technologies" - MMA, Andrevlje: Faculty of Technical Sciences, 25-26 Septembar, 2015, pp. 1-4, ISBN 978-86-7892-722-5
() Invited lectures from the international meeting printed in its entirety
Kramar D., Sekulić M., Kovač P., Gostimirović M., Kopač J.: The Implementation of Taguchi Method for Quality Improvement in High-Pressure Jet Assisted Turning Process, 11. International Scientific Conference "Advanced Production Technologies" - MMA, Novi Sad: Fakultet tehničkih nauka, 20-21 Septembar, 2012, pp. 37-40, ISBN ISBN 978-86-7892-419
() Invited lectures from the international meeting printed in its entirety
Kovač P., Gostimirović M., Sekulić M., Savković B.: Main developments in cutting technology-Keynote Paper, 10. International Scientific Conference "Flexible Technologies" - MMA, Novi Sad: Faculty of Technical Sciences, 9-10 Oktobar, 2009, pp. 13-21, ISBN 978-86-7892-223-7
() Invited lectures from the international meeting printed in its entirety
Kovač P., Gostimirović M., Sekulić M., Savković B.: Modeling and simulation of cutting process-Invited Paper, 10. International Scientific Conference "Flexible Technologies" - MMA, Novi Sad: Faculty of Technical Sciences, 9-10 Oktobar, 2009, pp. 22-27, ISBN 978-86-7892-223-7
() Chapter in the M41 or research in the thematic collection of the national importance
Kovač P., Kulundžić N., Savković B., Kundrak J., Gostimirović M., Sekulić M.: Development In Machining Technology, Scientific Research Reports, Edited by : Wojciech Zebela and Ildiko Mankova, Determination of Temperature Distribution and Cutting Force in Drilling, Cracow, Cracow University of Technology, 2016, str. 7-18, ISBN 978-80-553-2576-7
() Chapter in the M41 or research in the thematic collection of the national importance
Kovač P., Savković B., Kulundžić N., Gostimirović M., Holešovsky F., Sekulić M.: Development In Machining Technology, Scientific Research Reports, Edited by : Wojciech Zebela and Ildiko Mankova, Simulation of Temperature Distribution on the 3D Moving Cutting Tool, Cracow, Cracow University of Technology, 2015, str. 20-26, ISBN 978-83-7242-844-8
() Research published in the leading journal of the national importance
Milikić D., Sekulić M., Gostimirović M., Uzelac S.: Uticaj trenja i poprečnog sečiva burgije na položaj i veličinu sila rezanja, Međunardoni časopis Tribologija u industriji, 1999, Vol. 21, No 1, pp. 24-29
() Defended Doctoral dissertation
Sekulić,M. Naziv: Određivanje sila rezanja pri bušenju, Doktorska disertacija
() Defended Magister thesis
Sekulić,M. Naziv: Razvoj podloga za proračun sila rezanja, Magistarska teza
